Subaru WRX STI (VA) 2014–2021 Performance Parts & Upgrades

The Subaru WRX STI (VA) was sold in Australia from 2014 to 2021, with the 2.5L EJ257 turbocharged flat-four, a six-speed manual and all-wheel drive. It shares its body and much of its chassis with the WRX (VA), but the engine, gearbox and driveline are different. This page lists the parts we stock for the VA STI, including COBB Accessports, intercoolers and exhausts, Perrin and GrimmSpeed engine parts, HARDRACE suspension, APR carbon aero, GSC Power-Division and Manley engine internals, KORSH exhausts and Alcon and Paragon brakes.

Shop by Vehicle
Popular upgrades for the VA STI
  • Tuning and fuel: COBB Accessport V3 in Australian spec, flex fuel kits, MAP sensors, fuel rail line kits and fuel pressure regulators.
  • Intake and turbo: COBB and aFe intakes, Perrin intake tubes and bypass valves, COBB front mount intercoolers, and GFB and Turbosmart blow-off valves.
  • Exhaust: COBB, KORSH and AWE cat-backs and exhaust packages, KORSH downpipes and Perrin axle-backs.
  • Suspension: AST coilovers, COBB adjustable sway bars, alignment and roll centre kits, plus HARDRACE and SPL arms and bushings.
  • Brakes: Alcon front big brake kits, Paragon rotors and Frenkit caliper rebuild kits.
  • Engine and aero: Manley and CP pistons, ACL bearings, GSC valvetrain parts, ARP studs and APR carbon wings, canards and lips.
Choosing the Right Part
  • STI or WRX: the VA WRX uses the FA20 engine, so engine, intake, turbo and exhaust parts made for the STI's EJ257 won't fit it. Many suspension and aero parts are shared.
  • Pre-facelift or facelift: some aero parts, such as APR's front air dam and canards, are made for 2015-2017 bumpers only, so check the years in the title.
  • Wheel fitment: the VA STI uses 5x114.3 hubs, so check the stud pattern on wheel spacers and wheels.
Installation

Have a qualified workshop fit suspension, brake, fuel and engine parts. Get a wheel alignment after any suspension change, and bleed and road-test the brakes after brake work. Intake, turbo and fuel upgrades need a tune to suit; ask us if you're unsure.

Need help choosing? Contact our team at sales@chicaneaustralia.com.au.

546 products
Sort by
Sort by
Frenkit Performance front Brembo 40/46mm kit, WRX STI and Lancer Evo – four pistons, seals, grey boots and box Why Frenkit Performance infographic: silicone dust boots, seal compound and testing (product illustration)
Frenkit Brembo 4-pot seal kit, WRX STI / Lancer Evo front – 40/46mm seals, dust boots and o-rings
Turbosmart BOV5 Vee Port Pro Blow Off Valve - Subaru WRX (GD/GG) / WRX STI (GD/GR/GV) / Forester XT (SG) Turbosmart BOV5 Vee Port Pro Blow Off Valve - Subaru WRX (GD/GG) / WRX STI (GD/GR/GV) / Forester XT (SG) - Image 2
HARDRACE Rear Lower Control Arm - Subaru Forester (SJ/SH) / WRX (VB/VN) / BRZ (ZD8/ZC6) / Toyota GR86 (ZN8) - Hardened Rubber HARDRACE Rear Lower Control Arm - Subaru Forester (SJ/SH) / WRX (VB/VN) / BRZ (ZD8/ZC6) / Toyota GR86 (ZN8) - Hardened Rubber - Image 2
HARDRACE Rear Lower Control Arm - Subaru Forester (SJ/SH) / WRX (VB/VN) / BRZ (ZD8/ZC6) / Toyota GR86 (ZN8) - Pillow Ball HARDRACE Rear Lower Control Arm - Subaru Forester (SJ/SH) / WRX (VB/VN) / BRZ (ZD8/ZC6) / Toyota GR86 (ZN8) - Pillow Ball - Image 2
COBB stainless steel turbo heat shield – Subaru WRX and STI – shield with mounting bolts COBB stainless steel turbo heat shield – Subaru WRX and STI – underside and edge flanges
COBB fuel pressure regulator reference relocation kit – vacuum hoses, T-fitting and cable ties
COBB SF intake – Subaru WRX and STI – kit with black silicone hose, filter and bracket COBB SF intake – MAF housing and velocity stack side view
COBB Tuning Urethane Exhaust Hanger - Subaru WRX/STI (GH/GR/GV/VA) BRZ (ZC6/ZD8) Liberty (BL/BP) / Toyota 86 (ZN6/ZN8) - 12mm Single
COBB SF intake airbox – Subaru WRX STI VA – assembled black airbox with lid COBB SF intake airbox – Subaru WRX STI VA – surround and lid separated
COBB aluminium radiator shroud – Subaru WRX/STI VA – shroud with edge trim and hardware COBB aluminium radiator shroud – Subaru WRX/STI VA – COBB logo close-up
MST Subaru WRX STI cold air intake with red cone filter, aluminium MAF tube and heat shield, side panel removed MST WRX STI EJ257 intake assembled: black heat shield, red filter and intake tube
COBB lightweight main pulley – Subaru EJ – black billet pulley, front view COBB lightweight main pulley – Subaru EJ – front view, second copy (product illustration)
COBB SF intake hardware kit – two hose clamps, bolts, washers and hex key
COBB 3-port boost control solenoid hardware kit – six cable ties, hex bolt and washer
COBB TGV shaft seal kit – Subaru EJ – two plates, bolts, O-rings and lube COBB TGV shaft seal plate – Subaru EJ – both sides with laser-etched logo
COBB turbo blanket – Subaru EJ turbo – blanket with retaining spring and wire COBB turbo blanket – Subaru EJ turbo – side profile with COBB badge
COBB turbo blanket – Subaru EJ – Black Lava blanket with spring and tie wire COBB turbo blanket – Black Lava outer layer with COBB badge
COBB MAF extension harness – Subaru – sleeved harness with male and female connectors COBB MAF extension harness – connector ends close-up
COBB battery tie down – Subaru – black billet bar with COBB logo, angled view COBB battery tie down – Subaru WRX, STI and BRZ – black billet bar three-quarter view
COBB pitch stop mount – Subaru WRX, STI and Forester XT – black mount with bushings COBB pitch stop mount – Subaru – side view of the slotted arm
COBB SF intake replacement filter – blue cotton element with clamp (product illustration) COBB SF intake replacement filter – grey cotton element with clamp (product illustration)
Got It Rex GIR Driveshaft / CV Boot Heat Shield - Subaru WRX / STI - 6-Speed Got It Rex GIR Driveshaft / CV Boot Heat Shield - Subaru WRX / STI - 6-Speed – Image 2
Got It Rex GIR Breather Plug - Subaru EJ207 / EJ257 - Rocker Cover & Breather Ports Got It Rex GIR Breather Plug - Subaru EJ207 / EJ257 - Rocker Cover & Breather Ports – Image 2
Got It Rex GIR Exhaust Hanger Bracket - Subaru STI 6-Speed Gearbox Got It Rex GIR Exhaust Hanger Bracket - Subaru STI 6-Speed Gearbox – Image 2
aFe Takeda Momentum intake – Subaru WRX STI (VA) – airbox and inlet duct with Pro DRY S filter aFe Takeda Momentum intake – Subaru WRX STI (VA) – airbox and inlet duct, second angle
aFe Takeda Attack Stage-2 cold air intake – Subaru WRX STI (VA) – red scoop and shield with Pro DRY S filter aFe Takeda Attack Stage-2 cold air intake – Subaru WRX STI (VA) – side view of red scoop and intake tube
SPL Parts Rear Traction Arms - Subaru WRX/STI (VA) SPL Parts Rear Traction Arms - Subaru WRX/STI (VA) - Image 2
Sale price$1,045.00
Only 2 at Supplier
VIEW PRODUCT