Quick Connect Fittings

• Fittings and Hose: the full fuel and fluid plumbing range
• AN Fittings: for the AN side of your quick connect adaptor
• Adapter Fittings: thread and size adaptors
• Bulkhead Fittings: for passing lines through a tank, panel or firewall
• Hose Ends: for terminating AN hose
• Plugs and Caps: for blanking unused ports and lines
• Hose Clamps: for securing hose on barb fittings
• All Brands

Work through the following points in order.

• SAE quick connect size: Fittings are listed by the size of the quick connect end. Imperial sizes are 5/16", 3/8", 1/2", 5/8" and 3/4". Metric sizes are 8mm, 10mm, 12mm and 16mm. Match this to the line or connector you are joining.
• Male or female: SAE Male fittings provide the quick connect end that a female connector clicks onto. SAE Female fittings accept a male quick connect end.
• The other end: Choose AN ORB (2AN, 6AN, 8AN or 10AN) to thread into a port, AN Male for AN hose ends, hose barb (5/16", 3/8", 1/2" or 5/8") for push-on hose, or spring lock (3/8" or 1/2", male or female).
• Barb angle: Barb fittings come in straight, 45° and 90° versions to suit your line routing.
• Bulkhead and length: Bulkhead versions are available in 6AN and 10AN ORB. Some fittings also come in Short or Extended lengths.
• Tees, plugs and caps: Use these to split a line or to blank off an unused quick connect.

Quick connect fittings are part of your fuel system, so installation by a professional is recommended.

Depending on the fitting you choose, you may also need:

• Suitable hose and hose clamps for barb connections
• AN hose ends for AN Male connections
• A matching ORB port for AN ORB fittings

Before you order, check the size and gender of both ends against your existing lines.

What does a quick connect fitting do?
It adapts an SAE EFI quick connect fuel line to another connection type, such as AN, hose barb or spring lock.

Which brand do you stock for quick connect fittings?
This range is from Radium Engineering, including their V2 Quick Connect fittings.

What sizes are available?
SAE ends come in 5/16", 3/8", 1/2", 5/8" and 3/4", plus 8mm, 10mm, 12mm and 16mm. AN ORB ends range from 2AN to 10AN.

Are these fittings vehicle specific?
No. They are universal. Choose them by matching the size and connection type to your fuel lines.