MST Performance Cold Air Intake
Not sure which option fits your application? Contact Us — we're happy to help.
MST Performance Cold Air Intake - Toyota GR Corolla (GZEA14)
The MST Performance cold air intake replaces the factory airbox on the 1.6L turbo three-cylinder in the Toyota GR Corolla (GZEA14). A dry cone filter sits behind a moulded heat shield, and black powder-coated intake pipes with silicone joiners carry the air to the turbo. It maximises airflow for improved throttle response and a more aggressive, sporty induction sound.
MST rates the kit at +16 hp at 5,500 rpm and +17 Nm at 3,700 rpm. The dry filter is easy to service: clean it every 20,000 km and replace it at 60,000 km.
Note: This is MST's open-design GR Corolla intake. It does not share pipes with MST's covered GR Corolla intake (TY-GRC05R). Installation by a professional is recommended.
Features
- Maximises airflow to the engine
- Improved throttle response
- More aggressive and sporty induction sound
- Black powder-coated inlet pipes and heat shield
- Easy-to-maintain dry cone air filter (89/115mm)
- MST rated gains: +16 hp @ 5,500 rpm / +17 Nm @ 3,700 rpm
- MST limited lifetime warranty against defects in materials and workmanship
Pairs Well With
- MST Performance Covered Cold Air Intake - Toyota GR Corolla (GZEA14) - Red
- MST Performance Turbo Inlet Pipe - Toyota GR Yaris (GXPA16) / GR Corolla (GZEA14)
- MST Performance Covered Cold Air Intake - Toyota GR Corolla (GZEA14)
Shop more: MST Performance
Need help confirming fitment for your Toyota? Contact our team at sales@chicaneaustralia.com.au.
Product
- Brand
- MST Performance
- Finish
- Black powder-coated pipes and heat shield
- Part number(s)
- TY-GRC01
Details
- Product
- Cold air intake system
- Engine
- Toyota 1.6L turbo three-cylinder (G16E-GTS)
- Filter
- Dry cone filter, 89mm neck / 115mm
- MST rated gains
- +16 hp @ 5,500 rpm / +17 Nm @ 3,700 rpm
- Filter care
- Clean every 20,000 km and replace at 60,000 km
- Warranty
- MST limited lifetime warranty
Contents
2 x intake pipes
1 x heat shield
1 x air filter (89/115mm)
1 x 83-89mm silicone hose
1 x 89-89mm silicone hose
1 x 3 1/2" clamp
3 x 4 1/4" clamps
2 x brackets
1 x 4mm rubber cap
Mounting hardware (M4 bolts, M8 bolts, nuts and washers)

Need Help Finding the Right Part?
We’ll Track It Down for You
We know how frustrating it can be searching for the right part. If it’s not listed on our site, that doesn’t mean we can’t source it.
Fill out the quick form below and our team will track it down for you.

