MST Performance Cold Air Intake
Not sure which option fits your application? Contact Us — we're happy to help.
MST Performance Cold Air Intake - BMW 125i / 228i / 320i / 328i / 420i / 428i (F20 / F22 / F30 / F32)
The MST Performance cold air intake replaces the factory airbox on the N20 / N26 2.0L turbo in the BMW 125i (F20), 228i (F22), 320i and 328i (F30) and 420i and 428i (F32). A two-piece intake pipe and cone filter maximise airflow to the turbo for sharper response and a sportier induction sound. MST rates it at +13.3 hp and +32 Nm at 2,946 rpm.
A heat shield and cover keep hot engine-bay air away from the filter. Clean the filter every 20,000 km and replace it at 60,000 km.
Note: For the N20 / N26 2.0L turbo engine only. Later B48-engined models are not covered. If you are unsure which engine your car has, send us a photo of your engine bay before ordering. Installation by a professional is recommended.
Features
- Two-piece intake pipe to maximise airflow to the engine
- Heat shield and cover to block hot engine-bay air
- More aggressive, sporty induction sound
- MST rated gains: +13.3 hp / +32 Nm at 2,946 rpm
- Filter service: clean every 20,000 km and replace at 60,000 km
- MST limited lifetime warranty against defects in materials and workmanship
Pairs Well With
- MST Performance Turbo Inlet Pipe - BMW 125i / 228i / 320i / 328i / 420i / 428i / 520i / 528i (F20 / F22 / F30 / F32 / F10)
- MST Performance Cold Air Intake and Turbo Inlet Kit - BMW 328i (F30)
- MST Performance Cold Air Intake - BMW 520i / 528i (F10)
Shop more: MST Performance
Need help confirming fitment for your BMW? Contact our team at sales@chicaneaustralia.com.au.
Product
- Brand
- MST Performance
- Part number(s)
- BW-N2001
Details
- Product
- Cold air intake system
- Engine
- BMW N20 / N26 2.0L turbo
- Intake pipe
- Two-piece, 76mm silicone joiner
- Heat shield
- Heat shield with cover
- MST rated gains
- +13.3 hp / +32 Nm at 2,946 rpm
- Filter care
- Clean every 20,000 km and replace at 60,000 km
- Warranty
- MST limited lifetime warranty
Contents
1 x intake pipe A
1 x intake pipe B
1 x 76-76mm silicone hose
1 x heat shield
1 x heat shield cover
1 x air filter
1 x mount rubber
2 x clamps
Mounting hardware (M4 bolts, washers and spring washers; M6 and M8 bolts, nuts and washers)

Need Help Finding the Right Part?
We’ll Track It Down for You
We know how frustrating it can be searching for the right part. If it’s not listed on our site, that doesn’t mean we can’t source it.
Fill out the quick form below and our team will track it down for you.

