MST Performance Covered Cold Air Intake
Not sure which option fits your application? Contact Us — we're happy to help.
MST Performance Covered Cold Air Intake - Toyota GR Yaris (GXPA16)
The MST Performance covered cold air intake replaces the factory airbox on the G16E 1.6L turbo in the Toyota GR Yaris (GXPA16). A fully enclosed airbox with a see-through top cover and a newly designed air duct feeds the high-flow filter while keeping out hot engine-bay air. MST rates it at +17 hp at 6,000 rpm and +20 Nm at 3,300 rpm.
All the hardware and instructions are included, and MST has tested it for no check engine light after installation. The clear screw-on cover lets you check the filter without pulling the airbox apart.
Note: This enclosed version does not share intake pipes with MST's earlier open-design GR Yaris intake (TY-GRY01 / TY-GRY01L), and the airbox and air duct are not sold separately as an upgrade for it. Installation by a professional is recommended.
Features
- Fully enclosed airbox with see-through cover
- New air duct design
- All necessary hardware and instructions included
- Tested for no check engine light after installation
- MST rated gains: +17 hp at 6,000 rpm / +20 Nm at 3,300 rpm
- MST limited lifetime warranty against defects in materials and workmanship
Shop more: MST Performance
Need help confirming fitment for your car? Contact our team at sales@chicaneaustralia.com.au.
Product
- Brand
- MST Performance
- Part number(s)
- TY-GRY06B
Details
- Product
- Covered cold air intake system
- Engine
- Toyota G16E 1.6L turbo
- Airbox
- Fully enclosed, see-through top cover
- Filter
- High-flow cone, 89/145mm
- MST rated gains
- +17 hp at 6,000 rpm / +20 Nm at 3,300 rpm
- Not compatible with
- MST open-design intake TY-GRY01 / TY-GRY01L parts
- Warranty
- MST limited lifetime warranty (original purchaser)
Contents
1 x air box
1 x top cover
1 x air scoop
2 x intake pipes
1 x air filter (89/145mm)
2 x 83-89mm silicone hoses
1 x 89-89mm 15-degree silicone hose
1 x 3 1/2" clamp
4 x 4 1/4" clamps
2 x brackets
3 x CNC heat shield mounts
1 x 4mm rubber cap
9 x M4 bolts
2 x M6 bolts (12mm and 10mm)
1 x M6 washer
1 x M6 screw
1 x M8 30mm bolt

Need Help Finding the Right Part?
We’ll Track It Down for You
We know how frustrating it can be searching for the right part. If it’s not listed on our site, that doesn’t mean we can’t source it.
Fill out the quick form below and our team will track it down for you.

