Frenkit Front Brake Caliper Piston & Seal Rebuild Kit Subaru BRZ (ZC6/ZD8) / Toyota 86 (ZN6/ZN8) 40mm

Frenkit Front Brake Caliper Piston & Seal Rebuild Kit - Subaru BRZ (ZC6/ZD8) / Toyota 86 (ZN6/ZN8) - 40mm

Frenkit is a Spanish brake hardware maker that has supplied OEM-quality caliper repair parts for over 50 years, built under an ISO 9001 quality system. This kit fully rebuilds one standard front caliper on the Subaru BRZ (ZC6/ZD8) and Toyota 86 (ZN6/ZN8) with new 40mm pistons, seals, dust boots, slide pin boots and bleed screws, ideal when the old pistons are pitted or corroded.

Note: Suits the standard (non-Brembo) twin-piston front caliper with 40mm pistons; measure your pistons before ordering. One kit services one caliper, so order two for both sides. Installation by a professional is recommended.

Features

• Two new 40mm pistons made to OE specification
• New pressure seals, dust boots and slide pin boots
• New bleed screws, caps and assembly grease included
• Made to OEM specification under ISO 9001

Kit Contents

• 2 x 40mm piston
• 2 x 40mm pressure seal
• 2 x 40mm dust boot
• 3 x Slide pin boot
• 2 x Bleed screw
• 2 x Bleeder cap
• 1 x Assembly grease

Pairs Well With

• Frenkit Front Brake Caliper Guide Pin Kit - Subaru WRX/Impreza/Forester/Liberty (GH/GE/GRB/GVB/VA) / BRZ (ZC6/ZD8) / Toyota 86 (ZN6/ZN8)
• Frenkit Rear Brake Caliper Rebuild Kit - Subaru WRX/Liberty GT/Forester/BRZ (VA/BM/SJ/ZC6) / Toyota 86 (ZN6)
• Frenkit Brake Pad Shim Kit - Subaru WRX/Impreza/Forester/Liberty (GH/GE/GJ/GP/SJ/GK) BRZ/Toyota 86 (ZN6/ZD8) - Front

Not sure if this suits your car? Contact our team at sales@chicaneaustralia.com.au.