Nitto Forged Pistons
Not sure which option fits your application? Contact Us — we're happy to help.
Nitto Forged Pistons - Nissan RB30 DOHC - RB25 / RB26 Head Conversion
These Nitto forged pistons are for the popular RB30 "RB30DET" combination, where an RB30 bottom end is paired with an RB25 or RB26 twin-cam head. They keep the factory 85 mm stroke and suit turbo street, drag and circuit builds that need a strong forged piston.
Pick the bore size to match your block: 86.5 mm (+0.020") with a 12 cc dome, or 87.0 mm (+0.040") with an 11 cc dome.
Nitto pistons are made by CP Carrillo to Nitto's own specification and are forged from CP's low-silicon 2618 aluminium in the Turbo HD forging. Each set comes with a PVD-coated ring set for strong bore sealing under boost, plus CP 9310 wrist pins that are Rockwell tested, case hardened and cryogenically treated.
Note: Installation by a professional is recommended. Engine internals must be measured and set up by a qualified engine builder.
Features
- Made by CP Carrillo to Nitto's specification
- 2618 low-silicon aluminium, Turbo HD forging
- PVD-coated ring set for better bore sealing and less friction
- 9310 wrist pins (0.827"), 100% Rockwell tested, case hardened and cryo treated
- Forced double pin oiling
- Anti-detonation and accumulator grooves to protect the top ring and improve ring seal
Kit Contents
- 6 x Nitto forged DOHC pistons
- PVD-coated ring set
- 6 x CP 9310 wrist pins
Warranty
Nitto parts are built for racing and off-road use. Inspect every part during assembly and blueprinting, and contact us before fitting if anything measures outside tolerance. Nitto will repair or replace a faulty part at its discretion, and any modification voids the warranty. Full terms: Nitto limited warranty (PDF).
Pairs Well With
- Nitto Forged Stroker Pistons - Nissan RB30 DOHC - RB25 / RB26 Head Conversion
- Nitto Forged Pistons - Nissan RB30 DOHC - RB25 NEO Head Conversion
- Nitto H-Beam Connecting Rods - Nissan RB30 - Commodore (VL) / Skyline (R31)
- Nitto I-Beam Connecting Rods - Nissan RB30 - Commodore (VL) / Skyline (R31)
- Nitto V2 I-Beam Connecting Rods - Nissan RB30 - Commodore (VL) / Skyline (R31)
Shop more: Nitto
Need help choosing parts? Contact our team at sales@chicaneaustralia.com.au.
Vehicle Compatibility
| Make | Model | Chassis | Years | Engine / Notes |
|---|---|---|---|---|
| Nissan | RB30 hybrid | — | — | RB30 block with RB25 / RB26 DOHC head. Suits RB30 bottom ends built with a DOHC head |
Technical Specifications
| Spec | Value |
|---|---|
| Brand | Nitto |
| Product | Forged pistons, standard stroke |
| Engine | Nissan RB30 with RB25 / RB26 DOHC head |
| Material | 2618 aluminium |
| Forging | Turbo HD |
| Ring type | PVD |
| Bore | 86.5 mm (+0.020"), 87.0 mm (+0.040") |
| Dome | 86.5 mm: +12 cc; 87.0 mm: +11 cc |
| Pin diameter | 0.827" |
| Pin length | 2.500" |
| Pin wall | 0.200" standard / 0.250" optional |
| Pin material | 9310 standard / 300M optional |
| Warranty | Nitto limited warranty (racing use) |
| Instructions | Nitto installation notes (link below) |
| Part number(s) | NIT-CP-RB30DC20, NIT-CP-RB30DC40 |
Contents
1 x set of 6 Nitto forged pistons with PVD rings and 9310 wrist pins

Need Help Finding the Right Part?
We’ll Track It Down for You
We know how frustrating it can be searching for the right part. If it’s not listed on our site, that doesn’t mean we can’t source it.
Fill out the quick form below and our team will track it down for you.

