Nitto H-Beam Connecting Rods Nissan RB30 Commodore (VL) / Skyline (R31)

Nitto H-Beam Connecting Rods - Nissan RB30 - Commodore (VL) / Skyline (R31)

Nitto's RB30 H-beam rods are a forged 4340 upgrade for RB30 engines from the VL Commodore and R31 Skyline, in SOHC form or with a DOHC head. They suit turbo street cars and mild drag builds that need more strength than the factory rods.

Nitto H-beams are made from double-melted 4340 forged billet and machined as a one-piece forging. They run 7/16" ARP 2000 rod bolts and silicon bronze pin bushes, giving a strong, affordable rod for mid-level builds.

Note: Installation by a professional is recommended. Engine internals must be measured and set up by a qualified engine builder.

Features

• Double-melted 4340 billet steel, one-piece forging
• X-ray and sonic grade tested, quenched, heat treated and shot peened (38 HRC)
• Doweled cap for accurate cap alignment
• Silicon bronze pin end bushes
• ARP 2000 rod bolts, with ARP Custom Age 625+ available as an upgrade
• Balanced to within ±1 g per set; big and small end bores sized to ±0.0001" on Sunnen honing equipment

Kit Contents

• 6 x Nitto H-beam connecting rods with 7/16" ARP 2000 rod bolts

Warranty

Nitto parts are built for racing and off-road use. Inspect every part during assembly and blueprinting, and contact us before fitting if anything measures outside tolerance. Nitto will repair or replace a faulty part at its discretion, and any modification voids the warranty. Full terms: Nitto limited warranty (PDF).

Pairs Well With

• Nitto Billet Crankshaft - Nissan RB30 - Commodore (VL) / Skyline (R31)
• Nitto Forged Pistons - Nissan RB30 DOHC - RB25 / RB26 Head Conversion
• Nitto Forged Pistons - Nissan RB30 SOHC - Commodore (VL) / Skyline (R31)
• Nitto Forged Stroker Pistons - Nissan RB30 DOHC - RB25 / RB26 Head Conversion

Shop more: Nitto

Need help choosing parts? Contact our team at sales@chicaneaustralia.com.au.