Nitto DBS Metal Head Gasket
Not sure which option fits your application? Contact Us - we're happy to help.
Nitto DBS Metal Head Gasket - Mitsubishi 4G63 - Lancer Evolution IV–IX (CN9A / CP9A / CT9A)
The Nitto DBS Drag Series metal head gasket suits the Mitsubishi 4G63T in the Lancer Evolution IV to IX. It is made to keep cylinder pressure sealed in high-boost street, drag and circuit engines.
Choose the compressed thickness to set your compression ratio and piston-to-head clearance: 1.0 mm, 1.3 mm or 1.6 mm. All suit bores from 85.0 to 86.0 mm.
Nitto's DBS Drag Series head gaskets are a multi-layer steel design. Around each bore they combine a conventional bead seal with a stainless steel "O-ring" that keeps combustion pressure away from the gasket layers, and Nitto's pressure-film testing shows a very high clamping pressure around the bore. An HR-200 coating, rather than a basic viton coating, seals the coolant and oil passages between the head and block.
Note: Installation by a professional is recommended. Engine internals must be measured and set up by a qualified engine builder.
Features
- DBS Drag Series multi-layer steel construction
- Bead seal around each bore plus a stainless steel "O-ring" that shields the layers from combustion pressure
- Bore sealing verified by Nitto using Fuji Prescale pressure film
- HR-200 coating to seal the water and oil passages between head and block
Warranty
Nitto parts are made for racing and off-road use. Inspect every part during assembly and blueprinting, and contact us before fitting if anything measures out of tolerance. Under Nitto's limited warranty a defective part will be repaired or replaced at Nitto's option, and any modification voids the warranty. Full terms: Nitto limited warranty (PDF).
Pairs Well With
- Nitto Engine Gasket Kit - Mitsubishi 4G63 - Lancer Evolution IV–IX (CN9A / CP9A / CT9A)
- Nitto Full Gasket Kit - Mitsubishi 4G63 - Lancer Evolution IV–IX (CN9A / CP9A / CT9A)
- Nitto Forged Pistons - Mitsubishi 4G63 - Lancer Evolution IV–IX (CN9A / CP9A / CT9A)
- Nitto Forged Stroker Pistons - Mitsubishi 4G63 - Lancer Evolution IV–IX (CN9A / CP9A / CT9A)
- Nitto Stroker Kit - Mitsubishi 4G63 - Lancer Evolution IV–IX (CN9A / CP9A / CT9A)
Shop more: Nitto
Need help choosing parts? Contact our team at sales@chicaneaustralia.com.au.
Product
- Brand
- Nitto
- Part number(s)
- NIT-MHG-4G6310, NIT-MHG-4G6313, NIT-MHG-4G6316
Details
- Product
- DBS Drag Series metal head gasket
- Engine
- Mitsubishi 4G63T
- Construction
- Multi-layer steel, bead seal plus stainless O-ring
- Coating
- HR-200
- Thickness
- 1.0 mm; 1.3 mm; 1.6 mm
- Bore range
- 85.0-86.0 mm
- Warranty
- Nitto limited warranty (racing use)
- Instructions
- Nitto installation notes (link below)
Contents
1 x Nitto DBS metal head gasket
Vehicle fitment
Universal fit: this part suits any car. Check the specifications above for sizes and fittings.
| Make | Model | Chassis | Years | Versions | Engine | Brakes | Position |
|---|
Can’t see your car? Ask us and we’ll check fitment for you.

Need Help Finding the Right Part?
We’ll Track It Down for You
We know how frustrating it can be searching for the right part. If it’s not listed on our site, that doesn’t mean we can’t source it.
Fill out the quick form below and our team will track it down for you.

