Nitto Full Gasket Kit Mitsubishi 4G63 Lancer Evolution IV–IX (CN9A / CP9A / CT9A)

Nitto Full Gasket Kit - Mitsubishi 4G63 - Lancer Evolution IV–IX (CN9A / CP9A / CT9A)

The Nitto full gasket kit gives you every gasket for a Mitsubishi 4G63T rebuild in one order: a DBS Drag Series metal head gasket and the Nitto engine gasket set. It suits Lancer Evolution IV to IX engines, from fresh standard rebuilds to built drag and circuit engines.

Choose the head gasket thickness to set compression and piston-to-head clearance: 1.0 mm, 1.3 mm or 1.6 mm. The head gasket suits bores from 85.0 to 86.0 mm.

The head gasket is Nitto's DBS Drag Series multi-layer steel design, with a bead seal and a stainless steel "O-ring" around each bore and an HR-200 coating to seal the coolant and oil passages. The engine gasket set uses OEM-quality components for the rest of the engine.

Note: Installation by a professional is recommended. Engine internals must be measured and set up by a qualified engine builder.

Features

• Nitto DBS Drag Series multi-layer steel head gasket
• Stainless "O-ring" and bead seal around each bore
• HR-200 coating for water and oil passages
• Complete OEM-quality engine gasket set
• One part number for the whole engine

Kit Contents

• 1 x Nitto DBS metal head gasket (thickness as selected)
• 1 x Nitto engine gasket kit

Warranty

Nitto parts are made for racing and off-road use. Inspect every part during assembly and blueprinting, and contact us before fitting if anything measures out of tolerance. Under Nitto's limited warranty a defective part will be repaired or replaced at Nitto's option, and any modification voids the warranty. Full terms: Nitto limited warranty (PDF).

Pairs Well With

• Nitto Stroker Kit - Mitsubishi 4G63 - Lancer Evolution IV–IX (CN9A / CP9A / CT9A)
• Nitto Forged Pistons - Mitsubishi 4G63 - Lancer Evolution IV–IX (CN9A / CP9A / CT9A)
• Nitto Forged Stroker Pistons - Mitsubishi 4G63 - Lancer Evolution IV–IX (CN9A / CP9A / CT9A)
• Nitto Billet Crankshaft - Mitsubishi 4G63 - Lancer Evolution IV–IX (CN9A / CP9A / CT9A)
• Nitto I-Beam Connecting Rods - Mitsubishi 4G63 - Lancer Evolution IV–IX (CN9A / CP9A / CT9A)

Shop more: Nitto

Need help choosing parts? Contact our team at sales@chicaneaustralia.com.au.