HEL Performance Braided Brake Lines
Not sure which option fits your application? Contact Us — we're happy to help.
Request a Price Match
Found it cheaper elsewhere? Send us the details and we'll do our best to match it.
Request received
Thanks! Our team will review it and be in touch shortly.
HEL Performance Braided Brake Lines - Audi TT RS (8J)
HEL Performance braided brake lines are a direct replacement for the four factory rubber brake hoses on the Audi TT RS (8J). The PTFE inner hose is wrapped in a stainless steel braid that does not swell under pressure, so the pedal stays firm and consistent under hard braking on the road or at the track. HEL lines are assembled in Australia, carry ADR certification for road use and come with HEL's lifetime warranty.
Note: Standard 4-line layout that replaces the OEM rubber hoses. Bleed the system with fresh fluid after fitting. Installation by a professional is recommended.
Features
- 4-line kit for the Audi TT RS (8J), two front and two rear
- Replaces the factory rubber brake hoses
- PTFE inner hose with stainless steel braid and clear PVC cover
- Stainless steel fittings
- Firmer, more consistent pedal feel
- ADR certified, lifetime warranty
Pairs Well With
- DIXCEL Front Brake Pads – Audi TT RS (8J) / Cupra Leon VZx (KL) / Cupra Formentor VZx (KM)
- DIXCEL Front Brake Rotors - Audi TT RS (8J) / Cupra Leon VZx (KL) / Cupra Formentor VZx (KM) - 370x32mm
- PARAGON 2-Piece Front Rotors – Audi TT RS (8J) / Cupra Leon / Formentor (VZx) – 370 x 32mm
- Alcon PRO-660 DOT 4 High Performance Brake Fluid - 500ml - Universal
- Dixcel 328 Racing Brake Fluid - Universal Fitment - DOT4 (0.5 Litre)
Shop more: Brake Lines
Need help confirming fitment? Contact our team at sales@chicaneaustralia.com.au.
Product
- Brand
- HEL Performance
- Part number(s)
- AUD-4-346
Details
- Vehicle
- Audi TT RS (8J)
- Kit
- 4-line, standard layout
- Inner hose
- PTFE, 3.5mm inside diameter
- Outer
- Stainless steel braid with PVC cover, 7.5mm outside diameter
- Fittings
- Stainless steel (303/304)
- Temperature range
- -70°C to 260°C
- Max working pressure
- 290 bar (4206 psi)
- Burst pressure
- 870 bar (12618 psi)
- Minimum bend radius
- 38mm
- Certification
- ADR
- Warranty
- Lifetime (HEL)
Contents
- 4 x HEL stainless steel braided brake lines
- ADR certification tags (1 per line)
- Banjo bolts and copper crush washers (where required)
- Instruction leaflet and HEL stickers
No instructions available for this product.
Need Help Finding the Right Part?
We’ll Track It Down for You
We know how frustrating it can be searching for the right part. If it’s not listed on our site, that doesn’t mean we can’t source it.
Fill out the quick form below and our team will track it down for you.