Cometic MLX Head Gasket Ford Focus RS (LZ) / Mustang High Performance (FN) 89mm Bore

$299.00
SKU: C15294-040
Thickness
💬
Need help choosing the right part?

Not sure which option fits your application? Contact Us — we're happy to help.

$17.95 Flat Shipping
Australia-wide
100% Genuine Parts
Warranty backed
Aussie Support
Local team
Guaranteed Safe Checkout
  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa
Cometic MLX Head Gasket 1.02mm (.040")$299.00

Cometic MLX Head Gasket - Ford Focus RS (LZ) / Mustang High Performance (FN) - 89mm Bore

The Cometic MLX head gasket is a multi-layer stainless steel replacement for the factory head gasket on the Ford 2.3L EcoBoost in the 2016-2018 Focus RS (LZ) and the 2020-2023 Mustang High Performance (FN). It has an 89mm round bore and comes in three compressed thicknesses, so you can match the stock deck height or set the compression ratio on a built engine.

Cometic's MLX (Multi-Layer Xtreme) design adds a fold-over stopper layer around each bore. The stopper acts as a torque-limiting surface that stops the combustion seal from yielding, which suits high-boost engines with high cylinder pressure. Embossed outer layers with a Viton coating seal the coolant and oil passages, and the gasket goes in dry with no sealant or re-torque.

Options

Compressed thickness: 1.02mm (.040"), 1.37mm (.054") or 1.52mm (.060"). Thicker gaskets lower compression; match the thickness to your engine builder's spec.

Note: Cometic lists this gasket for the 2016-2018 Focus RS and the 2020-2023 Mustang 2.3L only, so it does not suit the earlier Mustang EcoBoost (FM, or FN before the 2020 High Performance). The 89mm gasket bore suits the factory 87.5mm bore and oversize bores up to 88mm, such as the Manley Platinum Series pistons. One gasket per engine. Installation by a professional is recommended.

Features

  • Cometic MLX multi-layer stainless steel construction
  • Fold-over stopper layer around each bore stops the combustion seal yielding under high boost
  • Embossed outer layers coated with Viton seal coolant and oil
  • 89mm round bore
  • Choice of 1.02, 1.37 or 1.52mm compressed thickness
  • Installed dry: no sealant or re-torque needed

Pairs Well With

Need help confirming fitment? Contact our team at sales@chicaneaustralia.com.au.

Need Help Finding the Right Part?

We’ll Track It Down for You

We know how frustrating it can be searching for the right part. If it’s not listed on our site, that doesn’t mean we can’t source it.

Fill out the quick form below and our team will track it down for you.