PRL Motorsports Turbocharger Gasket & Hardware Kit
Not sure which option fits your application? Contact Us - we're happy to help.
PRL Motorsports Turbocharger Gasket & Hardware Kit - Honda Civic Type R (FK8 / FL5)
PRL's turbocharger gasket and hardware kit supplies every gasket, seal and fastener needed to remove and refit the turbo on the K20C1 Civic Type R. Keep one on hand for a turbo upgrade, a front pipe or turbo inlet install, or turbo servicing, so old crushed gaskets aren't reused and left to leak boost, exhaust gas, oil or coolant. The turbine-side gaskets are multi-layer stainless steel to handle exhaust heat.
Note: Suits the FK8 and FL5 Civic Type R. Replace these parts whenever the turbo or its oil and coolant lines are disconnected. Installation by a professional is recommended.
Features
- Multi-layer stainless steel turbine inlet and outlet gaskets
- Compressor inlet and outlet gaskets
- Coolant inlet and outlet gaskets, plus two copper crush washers
- Oil feed line O-ring filter assembly
- New M10 x 1.25mm stainless studs, stainless hex bolts and zinc-coated locking flange nuts
Pairs Well With
- RV6 R660 RED Ball Bearing Turbo w/ Bypass Valve – Honda Civic Type R FK8/FL5 (2.0T)
- MHI Stage 2 Turbo Upgrade – Honda Civic Type R (FK8 / FL5)
- Torque Solution Thermal Turbo Blanket – Honda Civic Type R FK8 / FL5
- KORSH Downpipe – Honda Civic Type R (FK8/FL5)
- RV6 Catted Downpipe – Honda Civic Type R FK8/FL5 (2017+)
- PRL Motorsports Titanium Turbocharger Inlet Pipe Only - Honda Civic Type R (FL5)
- PRL Motorsports x PTP Black Lava Turbo Blanket - Honda Civic Type R (FK8 / FL5)
Need help confirming fitment? Contact our team at sales@chicaneaustralia.com.au.
Product
- Brand
- PRL Motorsports
- Part number(s)
- PRL-HCR-TK-HW
Details
- Kit type
- Turbocharger gasket and hardware kit
- Engine
- Honda 2.0L turbo K20C1 (Civic Type R FK8 / FL5)
- Turbine gaskets
- Multi-layer stainless steel (MLSS), inlet and outlet
- Other gaskets
- Compressor inlet/outlet, coolant inlet/outlet, oil feed O-ring filter
- Studs
- 4 x M10 x 1.25mm stainless steel
- Fasteners
- 4 x M10 stainless hex bolts, 4 x M10 zinc-coated locking flange nuts, 2 copper crush washers
Contents
(1) Turbine inlet gasket – multi-layer stainless steel (MLSS)
(1) Turbine outlet gasket – multi-layer stainless steel (MLSS)
(1) Compressor inlet gasket
(1) Compressor outlet gasket
(1) Coolant inlet gasket
(1) Coolant outlet gasket
(1) Oil feed line O-ring filter assembly
(2) Copper crush washers
(4) M10 x 1.25mm stainless steel studs
(4) M10 stainless steel hex bolts
(4) M10 zinc-coated locking flange nuts
No instructions available for this product.
Vehicle fitment
Universal fit: this part suits any car. Check the specifications above for sizes and fittings.
| Make | Model | Chassis | Years | Versions | Engine | Brakes | Position |
|---|
Can’t see your car? Ask us and we’ll check fitment for you.

Need Help Finding the Right Part?
We’ll Track It Down for You
We know how frustrating it can be searching for the right part. If it’s not listed on our site, that doesn’t mean we can’t source it.
Fill out the quick form below and our team will track it down for you.

