PARAGON 2-Piece Front Rotors Audi RS5 (B8/8T) 365 x 34mm

Track-Proven Braking. Precision Thermal Control.

Upgrade your Audi RS5 B8 with Paragon 2-Piece Front Rotors, a high-performance solution engineered for drivers who demand more from their braking system. These lightweight 365mm x 34mm rotors are specifically designed to address the heat soak and thermal instability issues often associated with factory single-piece discs during spirited driving or track sessions.

By utilising a fully floating 2-piece construction, the high-carbon friction ring is free to expand and contract independently of the aluminium hat. This eliminates the "coning" effect and warping that leads to brake judder, providing a consistent pedal feel and improved modulation. Additionally, the reduction in unsprung mass enhances your RS5's suspension response and front-end turn-in precision.

Key Features

• Superior Heat Dissipation: Integrated directional cooling vanes pull significantly more air through the disc, allowing for up to 30% cooler operation than factory rotors.
• Fully Floating H-Bobbin System: The 10-bolt mounting system features stainless steel H-bobbins and anti-rattle clips to ensure silent operation on the street while providing unrestricted thermal expansion on the track.
• CM-250 High-Carbon Alloy: Friction rings are cast from a proprietary high-carbon alloy, offering exceptional thermal resistance and durability against cracking.
• Unsprung Weight Reduction: Weighing just 10.43 kg per rotor, these units are 0.68 kg lighter than OEM per side, reducing rotating mass for sharper performance.
• Precision CBN Finish: Every rotor is heat-treated and Cubic Boron Nitride (CBN) machined to ensure a lateral run-out of ≤ 0.03mm, allowing for immediate pad contact and fast bed-in.
• Slotted Face Design: Precision-cleared slots increase initial bite, clear gases under high load, and maintain consistent braking performance in wet weather.

Finish Options

• Clear Hard Anodised: The definitive motorsport finish. This treatment is highly heat-resistant and will not discolour even under repeated high-temperature track use.
• Black Dyed Hardcoat: Provides a subtle, OEM+ aesthetic. Ideally suited for high-performance road cars (please note black anodising may discolour if surface temperatures exceed 260°C).

Fitment Notes

• Direct bolt-on installation—no modifications required to factory calipers.
• Fully compatible with original Audi ABS systems and maintains factory brake bias.
• Works seamlessly with both OEM and aftermarket pads that utilise the factory pad depth.