PARAGON 2-Piece Front Rotors (4-Pot Brembo Swap) Subaru WRX (VB) 326 x 30mm

PARAGON 2-Piece Front Rotors (4-Pot Brembo Swap) – Subaru WRX (VB) – 326 x 30mm

These PARAGON 2-piece front rotors are built for the Subaru WRX (VB) converted to the STI 4-piston Brembo calipers, giving the swapped calipers a lighter, cooler-running disc for track days and hard road driving. Sold as a pair, each 326 x 30mm rotor joins a slotted cast-iron ring to a CNC-machined aluminium hat to reduce fade and judder over long sessions.

Choose a black hardcoat anodised hat or a clear hard anodised hat. The clear finish holds its colour under extreme heat and is the better pick for track use, while the dyed black finish can discolour once temperatures pass about 260°C.

Note: Made for the 2022-on VB WRX fitted with the OEM STI Brembo 4-piston caliper swap. The 37.5mm hat inner height means the 7.8mm spacer behind the rotor is not needed. The calipers (OEM 26292FG001 / 26292FG011) are not included, and 8mm wheel spacers are needed with the factory +55 offset wheels. Bolts on directly. Installation by a professional is recommended.

Features

• Fully floating 2-piece design, long D-Bobbin 10-bolt mounting
• CM-250 high-carbon cast-iron rings, heat treated and CBN machined, run-out held within 0.03mm
• Directional vanes run up to 30% cooler than the factory rotors
• Slotted faces keep the pad contact surface clean and consistent, wet or dry
• CNC-machined 6061-T6 aluminium hats, Mil-spec Type III hard anodised
• 37.5mm hat inner height

Pairs Well With

• PARAGON 6-Piston Front Big Brake Kit – Subaru WRX (VB)
• PARAGON Front 1-Piece Rotors – Subaru WRX (VB) – 315 x 28mm
• DIXCEL Front Brake Pads – Subaru WRX (VB) / Forester (SK) / Impreza (GT/GK/GU) / XV (GT)
• DIXCEL Rear Brake Pads – Subaru WRX (VA / VB) / BRZ (ZC6 / ZD8) / Toyota 86 (ZN6) / GR86 (ZN8)
• Alcon Front Big Brake Kit - Subaru WRX (VB)

Need help confirming fitment? Contact our team at sales@chicaneaustralia.com.au.