PARAGON 2-Piece Front Rotors (D-Bobbin Street) Lotus Exige V6 (S3) 332 x 32mm

PARAGON 2-Piece Front Rotors (D-Bobbin Street) – Lotus Exige V6 (S3) – 332 x 32mm

The street version of Paragon's 332 x 32mm two-piece front rotor pair for the Lotus Exige V6 (S3). It uses D-Bobbin mounting for quiet, refined road manners, while the vented floating ring and aluminium hat cut weight and add heat capacity for track days.

Two hat finishes are offered. Mil-Spec Hard Coat (clear) anodising keeps its colour under track heat and is the one to pick for circuit work. Mil-Spec Black Coat (dyed) anodising can discolour above 260°C, so it suits street and mixed use.

Note: This is the D-Bobbin street version; a race version with S-Bobbin mounting is listed separately. A direct bolt-on with no modifications; works with the factory calipers, ABS and brake bias, and takes OEM or aftermarket pads of the same pad depth as the originals. Installation by a professional is recommended.

Features

• 332 x 32mm front pair, 7.7 kg each
• Floating two-piece build on short D-Bobbins, 10-bolt
• CM-250 high-carbon alloy cast iron rings, heat treated to relieve stress and CBN machined flat
• CNC-machined 6061-T6 aluminium hats with Mil-Spec Type III hard anodising
• Directional internal vanes help the rotor run up to 30% cooler than the factory disc
• Slotted faces keep the pad contact clean and clear water and gas in the wet
• Lateral run-out held to 0.03mm or less and each rotor balanced within 2 g to keep vibration down

Pairs Well With

• PARAGON 2-Piece Rear Rotors – Lotus Exige V6 (S3) – 332 x 26mm
• PARAGON 2-Piece Front Rotors (S-Bobbin Race) – Lotus Exige V6 (S3) – 332 x 32mm
• AST Suspension Coilovers – Lotus Exige V6 (S3)
• Radium Engineering Fuel Rail Set - Toyota (2GR-FE)

Need help confirming fitment? Contact our team at sales@chicaneaustralia.com.au.