
SLR Speed | Precision Drift Geometry & Steering Systems
Where to buy SLR Speed in Australia: Chicane Australia sells the SLR Speed 25mm Steering Rack Stop Set online and ships Australia-wide from the NSW Central Coast, with the lead time shown on the listing. The set is made up of stackable composite rings that clip onto the steering rack shaft to limit travel at full lock. It suits racks with a 25mm internal diameter and stretches to fit up to 30mm, so it isn't tied to one car. SLR Speed is an American suspension company best known for drift angle kits and drift coilovers made in the USA. Its angle kits aren't listed with us at the moment, so contact our team if you are after one.
Shop by Product Type
- 25mm Steering Rack Stop Set (Lock Limiters): stackable composite rings for racks with a 25mm internal diameter, stretching to fit up to 30mm. Add or remove rings to set maximum steering lock.
- More steering and chassis parts: Suspension Accessories
Why limit steering lock
At full lock a tyre can rub on the chassis, guards or ducts, and the power steering and tie rods take extra load. Rack stops set a hard limit before that point, which helps prevent rubbing, power steering overload, stripped tie rods and bent components, and keeps the car controllable at big angles.
Choosing the Right Part
Check your steering rack shaft diameter before you buy. The set suits racks with a 25mm internal diameter, and the rings stretch to fit up to 30mm. It is not made for one car, so any rack within that range can use it. The number of rings you need depends on how much lock you want to remove, which comes down to your wheel, tyre and angle setup.
Installation & What You'll Need
Installation by a professional is recommended. The rings clip onto the rack shaft, so the inner tie rods don't need to come off. Add rings one at a time and check clearance at full lock in both directions until the steering stops where you want it, before any trimming is done.
FAQ
Where can I buy SLR Speed parts in Australia?
Chicane Australia sells the SLR Speed 25mm steering rack stop set and ships Australia-wide from the NSW Central Coast, with a 7 - 14 Days lead time. Contact our team if you need help with your steering setup.
What size steering rack does the SLR Speed rack stop set fit?
It suits steering racks with a 25mm internal diameter, and the rings stretch to fit up to 30mm. Measure your rack shaft before ordering.
Do I need to remove the tie rods to fit SLR rack stops?
No. The rings clip onto the rack shaft without removing the inner tie rods, and you add them one by one until you reach the steering travel you want.
Why fit steering rack stops?
They limit steering travel at full lock, which helps stop tyre rub on the chassis or ducts, reduces power steering overload and protects tie rods and other steering parts from damage.
Need help choosing? Contact our team at sales@chicaneaustralia.com.au.

