Where to buy Manley Performance in Australia: Chicane Australia offers Manley Performance engine internals online and ships Australia-wide from the NSW Central Coast. For Subaru there are Turbo Tuff I-Beam, I-Beam and H-Beam connecting rods for the EJ20 and EJ25, H-Tuff rods for the FA20 in the WRX (VA), BRZ (ZC6) and Toyota 86 (ZN6), EJ257 piston sets in 99.50mm and 100.00mm bore, ring sets and 9310 wrist pins. For the Ford Focus RS (LZ) and Mustang EcoBoost there are H-Beam rods, Platinum Series pistons and rings. Most Manley parts ship in 3 - 5 Days.
Manley Performance builds forged engine internals for high-boost and high-load use. Turbo Tuff rods are forged from 4340 aircraft-quality vacuum degassed steel with ribbing and a shot-peening process, while Platinum Series pistons are forged from 2618 high-strength alloy with moly-coated skirts and offset wrist pins for quieter cold starts.
Shop by Vehicle
Every part for your car, from all brands:
Choosing the Right Part
Manley internals are matched to a specific engine family and build target, so confirm your engine code before ordering:
-
Subaru EJ20 / EJ25 / EJ205 / EJ257: H-Beam, I-Beam, Turbo Tuff I-Beam and Turbo Tuff Pro Series rods (for example 5.216in length), plus EJ257 piston sets in 99.50mm bore (-14.00cc, 1.130in compression height) and 100.00mm bore (-26.00cc, 1.130in compression height).
-
Subaru FA20 (WRX VA) / Toyota 86 (ZN6) / Subaru BRZ (ZC6): H-Tuff Series connecting rods, a beefed-up H-Beam design for stronger street and boosted builds.
-
Ford Focus RS (LZ) / Mustang EcoBoost (FM / FN / FO): H-Beam connecting rod set, Platinum Series piston set and piston ring set for the 2.3 litre EcoBoost.
-
Wrist pins: 9310 steel straight wall chamfered pins for EJ25 piston sets, supplied as a set of four in .905in x 2.500in x .210in (23mm).
-
Rod selection: H-Beam rods suit high-revving naturally aspirated and moderate boost builds, while Turbo Tuff I-Beam rods are heavier and more robust for extreme forced induction, such as 1000+HP Subaru applications.
Check bore size, compression height, dome or dish volume, rod length and pin diameter against your block, crank and head specification before purchase.
Installation & What You'll Need
Fitting forged rods and pistons is an engine-out task, and installation by a professional engine builder or qualified workshop is strongly recommended.
- Machine shop measurement of bore, deck and clearances to suit the chosen piston and rod combination.
- Correct piston-to-bore, ring end gap and rod bearing clearances set for your power target and fuel.
- Rod bolt stretch gauge or torque-to-yield procedure as specified by Manley for the supplied fasteners.
- Balancing of the rotating assembly, plus fresh bearings, gaskets and engine oil on reassembly.
- A tune appropriate to the finished combination before the engine is loaded.
FAQ
Where can I buy Manley rods and pistons in Australia?
Chicane Australia sells Manley Performance connecting rods, forged pistons, ring sets and wrist pins and ships Australia-wide from the NSW Central Coast. Shop by vehicle above, search by Manley part number, or contact our team with your engine code and build target.
What is the difference between H-Beam and Turbo Tuff I-Beam rods?
The H-Beam is a lightweight, strong rod suited to high-revving naturally aspirated or moderate boost builds. The Turbo Tuff I-Beam is significantly heavier and more robust, engineered for extreme forced induction where cylinder pressures are high enough to bend standard rods.
What are H-Tuff Series rods?
H-Tuff rods use a beefed-up H-Beam design that provides a more robust alternative to a standard H-Beam, and are listed here for Subaru FA20 applications in the WRX (VA), BRZ (ZC6) and Toyota 86 (ZN6).
Which Manley parts suit the Ford Focus RS?
The Focus RS (LZ) and Mustang EcoBoost (FM / FN / FO) have a Manley H-Beam connecting rod set, a Platinum Series piston set and a matching piston ring set.
Which EJ257 piston sets are listed?
Manley EJ257 piston sets for the WRX STI come in 99.50mm bore with a -14.00cc dish and 100.00mm bore with a -26.00cc dish, both with a 1.130in compression height.
Need help choosing? Contact our team at sales@chicaneaustralia.com.au.