ATS & Across | Carbon LSDs & Clutch Systems

• LSD gear oil: ATS Gear Oil 85W-140, 1 litre
• More oils: Browse all gear and diff oil
• Differentials: Browse all differentials

ATS says the performance of an LSD changes a great deal with the oil used, and the wrong oil can cause noise or poor locking. Its 85W-140 is a GL-5 mineral oil made for all ATS Carbon LSD specs, in both front drive (FF) and rear drive (FR) cars. ATS says lock response gets sharper as the oil heats up, and it stays quiet even with high initial torque settings, from street driving to circuit use.

Check your diff's oil capacity before ordering, as the oil is sold in 1 litre bottles.

ATS's own oil change schedule:

• First change straight after the 300km break-in.
• Then every 3,000km of road driving.
• After every circuit session. If you are close to 3,000km before a track day, change it before you go.

ATS warns that late oil changes wear the final drive gears and bearings early and cause whine. Installation by a professional is recommended.

Where can I buy ATS LSD oil in Australia?
Chicane Australia sells ATS 85W-140 gear oil in 1 litre bottles and ships Australia-wide from the NSW Central Coast. ATS LSDs, clutches and gear sets aren't listed at the moment, so contact our team if you need one and we can check what is available.

Which ATS LSDs is the 85W-140 gear oil for?
ATS makes its 85W-140 gear oil for every spec of ATS Carbon LSD, in both front drive and rear drive cars, for street and circuit use.

How often should I change ATS LSD oil?
ATS recommends changing it straight after the 300km break-in, then every 3,000km of road driving, and after every circuit session.

Can I use another brand of oil in an ATS LSD?
ATS asks owners to use ATS oil for the break-in and the first few oil changes. If you then try another brand and notice noise or a change in locking, stop using it and change back to a suitable oil.