Radium Engineering Fuel Hanger Plumbing Kit Chevrolet Camaro (2010-2015)

Radium Engineering Fuel Hanger Plumbing Kit - Chevrolet Camaro (2010-2015)

This Radium Engineering plumbing kit connects a Radium fuel pump hanger to the engine on the 2010-2015 Chevrolet Camaro (LS3/LS7/L99). Twin 6AN PTFE feed lines run from the fuel hat to the filter because a single 8AN line will not fit between the tank and the unibody, while the rear section of the OEM feed line is retained so the factory fuel pressure sensor stays in place for ECU diagnostics. The rest of the stock feed line is repurposed as a 6AN return (SKUs 20-1326-03, 20-1326-05).

Use the variant selector to choose the filter element: 10-micron stainless steel (cleanable and reusable) or finer 6-micron microglass.

Note: Radium Engineering fuel rails and fuel rail plumbing kits are required and sold separately. Designed around the US-market vehicle; please confirm fitment on Australian-delivered vehicles with our team before ordering. Installation by a professional is recommended.

Kit Contents

• Dual 6AN PTFE feed lines from the fuel hat to the filter
• Fuel filter with built-in check valve (stainless or microglass, per variant)
• Camaro-specific fuel filter mount – no permanent vehicle modifications
• 8AN PTFE line from the filter to the RH fuel rail, with billet aluminium clamp to keep it away from the header
• Fuel pressure regulator and pressure gauge that mount to the LH fuel rail
• 6AN PTFE line from the regulator return port to the OEM feed hard line
• Four green anodised hose retaining adapters with clamps
• Thermal insulating sleeve for chafe and exhaust heat protection

Need help confirming fitment? Contact our team at sales@chicaneaustralia.com.au.