PARAGON 2-Piece Rear Rotors
Not sure which option fits your application? Contact Us - we're happy to help.
PARAGON 2-Piece Rear Rotors - Tesla Model 3 Performance (AWD) - 335 x 20mm
Paragon's 2-piece rear rotors for the Tesla Model 3 Performance pair a slotted CM-250 high carbon cast iron ring with a CNC-machined 6061-T6 aluminium hat. They bolt straight on in place of the factory 335 x 20mm rear rotors and work with the OEM ABS and brake system. Each rotor weighs 5.05kg, about 1.3kg less than the factory rotor, cutting unsprung weight.
Choose the hat finish: black dyed hardcoat, or clear hard anodised. Clear hats will not discolour under extreme heat and are the pick for track and race use; black hats can discolour above about 260°C. Both are Mil-Spec Type III anodised 6061-T6 aluminium.
Note: Suits the Model 3 Performance (dual motor AWD) and Model 3 cars fitted with Performance Upgrade Package (PUP) brakes. Works with OEM pads or aftermarket pads of the same pad depth. Installation by a professional is recommended.
Features
- 335 x 20mm slotted 2-piece rotors, sold as a rear pair
- Floating design cuts fade and judder in long sessions
- CM-250 high-carbon alloy cast iron rings, heat treated and CBN machined
- 48 directional vanes run up to 30% cooler than OE rotors
- Slotted face keeps the pad surface clean and helps in the wet
- Lateral run-out within 0.03mm, balanced within 2 g
- 6061-T6 aluminium hats, Mil-Spec Type III hard anodised
- About 1.3kg lighter per rotor than the factory rotor
- 48 directional ventilation vanes
- Rotor-to-hat mounting: D-Bobbin (short), 10-bolt
- Direct replacement for Tesla 1044636-00-D
- Works with the factory ABS and keeps the factory brake bias
Need help confirming fitment? Contact our team at sales@chicaneaustralia.com.au.
Product
- Brand
- Paragon
- Rotor size
- 335 x 20mm
- Hat finish options
- Black hardcoat / clear hard anodised
- Part number(s)
- P2R.048.335.200.19780.08.03.01.R / P2R.048.335.200.19780.08.03.02.R
Details
- Product
- 2-piece floating rotors (rear pair)
- Minimum thickness
- 18mm
- Construction
- 2-piece floating, slotted, directional vanes
- Ring material
- CM-250 high-carbon alloy cast iron, CBN machined
- Hat material
- 6061-T6 aluminium, Mil-Spec Type III anodised
- Rotor-to-hat mounting
- D-Bobbin (short), 10-bolt
- Weight (each)
- 5.05 kg
- Lateral run-out
- Within 0.03mm
- Replaces
- Tesla 1044636-00-D
- Fits
- Tesla Model 3 Performance (dual motor AWD) and Model 3 with Performance Upgrade Package (PUP) brakes, rear
Contents
- 1 x pair of Paragon 335 x 20mm 2-piece rotor assemblies with aluminium hats, stainless steel bobbins and anti-rattle clips (assembled, ready to fit)
- Installation manual
Vehicle fitment
Universal fit: this part suits any car. Check the specifications above for sizes and fittings.
| Make | Model | Chassis | Years | Versions | Engine | Brakes | Position |
|---|
Can’t see your car? Ask us and we’ll check fitment for you.

Need Help Finding the Right Part?
We’ll Track It Down for You
We know how frustrating it can be searching for the right part. If it’s not listed on our site, that doesn’t mean we can’t source it.
Fill out the quick form below and our team will track it down for you.

