PARAGON 2-Piece Rear Rotors
Not sure which option fits your application? Contact Us - we're happy to help.
PARAGON 2-Piece Rear Rotors - Porsche 718 Boxster / Cayman GTS 4.0 (982) - 330 x 28mm
Paragon's 2-piece rear rotors for the 718 Boxster and Cayman GTS 4.0 replace the factory cross-drilled one-piece discs with a slotted, directionally vented 330 x 28mm ring on a floating aluminium hat. Each assembly weighs 7.9 kg and bolts on with the OEM calipers, ABS and brake bias.
Choose the hat finish: black dyed hardcoat, or clear hard anodised. Clear hats will not discolour under extreme heat and are the pick for track and race use; black hats can discolour above about 260°C. Both are Mil-Spec Type III anodised 6061-T6 aluminium.
Note: Fits 718 (982) Boxster and Cayman GTS 4.0 rear with factory iron brakes. Not for carbon ceramic (PCCB) cars. Use OEM pads or aftermarket pads with the same pad depth. Installation by a professional is recommended.
Features
- 330 x 28mm slotted 2-piece rotors, sold as a rear pair
- Floating design cuts fade and judder in long sessions
- CM-250 high-carbon alloy cast iron rings, heat treated and CBN machined
- 48 directional vanes run up to 30% cooler than OE rotors
- Slotted face keeps the pad surface clean and helps in the wet
- Lateral run-out within 0.03mm, balanced within 2 g
- 6061-T6 aluminium hats, Mil-Spec Type III hard anodised
- Replaces the factory cross-drilled one-piece discs
- Rotor-to-hat mounting: D-Bobbin (short), 10-bolt
- Direct replacement for Porsche 981-352-403-00
- Works with the factory ABS and keeps the factory brake bias
Pairs Well With
Need help confirming fitment? Contact our team at sales@chicaneaustralia.com.au.
Product
- Brand
- Paragon
- Rotor size
- 330 x 28mm
- Hat finish options
- Black hardcoat / clear hard anodised
- Part number(s)
- P2R.217.330.280.20800.08.03.01.R / P2R.217.330.280.20800.08.03.02.R
Details
- Product
- 2-piece floating rotors (rear pair)
- Minimum thickness
- 26mm
- Construction
- 2-piece floating, slotted, directional vanes
- Ring material
- CM-250 high-carbon alloy cast iron, CBN machined
- Hat material
- 6061-T6 aluminium, Mil-Spec Type III anodised
- Rotor-to-hat mounting
- D-Bobbin (short), 10-bolt
- Weight (each)
- 7.9 kg
- Lateral run-out
- Within 0.03mm
- Replaces
- Porsche 981-352-403-00
- Fits
- Porsche 718 (982) Boxster / Cayman GTS 4.0 2017-on rear, factory iron brakes
Contents
- 1 x pair of Paragon 330 x 28mm 2-piece rotor assemblies with aluminium hats, stainless steel bobbins and anti-rattle clips (assembled, ready to fit)
- Installation manual
Vehicle fitment
Universal fit: this part suits any car. Check the specifications above for sizes and fittings.
| Make | Model | Chassis | Years | Versions | Engine | Brakes | Position |
|---|
Can’t see your car? Ask us and we’ll check fitment for you.

Need Help Finding the Right Part?
We’ll Track It Down for You
We know how frustrating it can be searching for the right part. If it’s not listed on our site, that doesn’t mean we can’t source it.
Fill out the quick form below and our team will track it down for you.

