PARAGON 2-Piece Rear Rotors (Iron Conversion)
Not sure which option fits your application? Contact Us - we're happy to help.
PARAGON 2-Piece Rear Rotors (Iron Conversion) - McLaren 570S / 570GT (P13) - 380 x 34mm
This Paragon kit converts the factory carbon-ceramic rear rotors on the McLaren 570S and 570GT to 380 x 34mm cast iron 2-piece rotors. Iron rings stand up to track use and cost much less to replace. The floating rings bolt to anodised aluminium hats and work with the OEM ABS and brake system.
Choose the hat finish: black dyed hardcoat, or clear hard anodised. Clear hats will not discolour under extreme heat and are the pick for track and race use; black hats can discolour above about 260°C. Both are Mil-Spec Type III anodised 6061-T6 aluminium.
Note: For cars with factory carbon-ceramic brakes, converting them to iron rotors. Installation by a professional is recommended.
Features
- 380 x 34mm slotted 2-piece rotors, sold as a rear pair
- Floating design cuts fade and judder in long sessions
- CM-250 high-carbon alloy cast iron rings, heat treated and CBN machined
- 48 directional vanes run up to 30% cooler than OE rotors
- Slotted face keeps the pad surface clean and helps in the wet
- Lateral run-out within 0.03mm, balanced within 2 g
- 6061-T6 aluminium hats, Mil-Spec Type III hard anodised
- Converts carbon-ceramic brakes to iron for track durability and lower running costs
- Rotor-to-hat mounting: D-Bobbin (short), 10-bolt
- Direct replacement for McLaren 11C0772CP
- Works with the factory ABS and keeps the factory brake bias
Pairs Well With
Need help confirming fitment? Contact our team at sales@chicaneaustralia.com.au.
Product
- Brand
- Paragon
- Rotor size
- 380 x 34mm
- Hat finish options
- Black hardcoat / clear hard anodised
- Part number(s)
- P2R.213.380.340.24760.08.01.01.R / P2R.213.380.340.24760.08.01.02.R
Details
- Product
- 2-piece floating rotors (rear pair)
- Minimum thickness
- 32mm
- Construction
- 2-piece floating, slotted, directional vanes
- Ring material
- CM-250 high-carbon alloy cast iron, CBN machined
- Hat material
- 6061-T6 aluminium, Mil-Spec Type III anodised
- Rotor-to-hat mounting
- D-Bobbin (short), 10-bolt
- Lateral run-out
- Within 0.03mm
- Replaces
- McLaren 11C0772CP
- Fits
- McLaren 570S and 570GT with factory carbon-ceramic brakes, rear
Contents
- 1 x pair of Paragon 380 x 34mm 2-piece rotor assemblies with aluminium hats, stainless steel bobbins and anti-rattle clips (assembled, ready to fit)
- Installation manual
Vehicle fitment
Universal fit: this part suits any car. Check the specifications above for sizes and fittings.
| Make | Model | Chassis | Years | Versions | Engine | Brakes | Position |
|---|
Can’t see your car? Ask us and we’ll check fitment for you.

Need Help Finding the Right Part?
We’ll Track It Down for You
We know how frustrating it can be searching for the right part. If it’s not listed on our site, that doesn’t mean we can’t source it.
Fill out the quick form below and our team will track it down for you.

