PARAGON 2-Piece Rear Rotors
Not sure which option fits your application? Contact Us - we're happy to help.
PARAGON 2-Piece Rear Rotors - Chevrolet Corvette Z06 (C8) - 380 x 34mm
These Paragon 2-piece rear rotors replace the factory 380 x 34mm rear rotors on the C8 Corvette Z06. The fully floating iron ring uses 48 directional vanes in place of the factory pillar vanes, bolted to a hard anodised aluminium hat. They bolt straight on and keep the factory brake bias.
Choose the hat finish: black dyed hardcoat, or clear hard anodised. Clear hats will not discolour under extreme heat and are the pick for track and race use; black hats can discolour above about 260°C. Both are Mil-Spec Type III anodised 6061-T6 aluminium.
Note: Suits the C8 Corvette Z06 rear brakes. Installation by a professional is recommended.
Features
- 380 x 34mm slotted 2-piece rotors, sold as a rear pair
- Floating design cuts fade and judder in long sessions
- CM-250 high-carbon alloy cast iron rings, heat treated and CBN machined
- 48 directional vanes run up to 30% cooler than OE rotors
- Slotted face keeps the pad surface clean and helps in the wet
- Lateral run-out within 0.03mm, balanced within 2 g
- 6061-T6 aluminium hats, Mil-Spec Type III hard anodised
- Directional vanes replace the factory pillar-vane design
- Rotor-to-hat mounting: H-Bobbin, 10-bolt
- Direct replacement for Chevrolet 86822032
- Works with the factory ABS and keeps the factory brake bias
Need help confirming fitment? Contact our team at sales@chicaneaustralia.com.au.
Product
- Brand
- Paragon
- Rotor size
- 380 x 34mm
- Hat finish options
- Black hardcoat / clear hard anodised
- Part number(s)
- P2R.220.380.340.21912.05.01.01.R / P2R.220.380.340.21912.05.01.02.R
Details
- Product
- 2-piece floating rotors (rear pair)
- Minimum thickness
- 32mm
- Construction
- 2-piece floating, slotted, directional vanes
- Ring material
- CM-250 high-carbon alloy cast iron, CBN machined
- Hat material
- 6061-T6 aluminium, Mil-Spec Type III anodised
- Rotor-to-hat mounting
- H-Bobbin, 10-bolt
- Lateral run-out
- Within 0.03mm
- Replaces
- Chevrolet 86822032
- Fits
- Chevrolet Corvette Z06 (C8) 2023-on, rear
Contents
- 1 x pair of Paragon 380 x 34mm 2-piece rotor assemblies with aluminium hats, stainless steel bobbins and anti-rattle clips (assembled, ready to fit)
- Installation manual
Vehicle fitment
Universal fit: this part suits any car. Check the specifications above for sizes and fittings.
| Make | Model | Chassis | Years | Versions | Engine | Brakes | Position |
|---|
Can’t see your car? Ask us and we’ll check fitment for you.

Need Help Finding the Right Part?
We’ll Track It Down for You
We know how frustrating it can be searching for the right part. If it’s not listed on our site, that doesn’t mean we can’t source it.
Fill out the quick form below and our team will track it down for you.

