Paragon 2-Piece Rear Brake Rotor (Larger Rotor) – Audi TTRS 8S, RS3 8V/8V.5, S3 8V/8V.5, Golf R Mk7/7.5, GTI Mk8 | 350x22mm

Upgrade the rear braking system on your VW or Audi MQB platform with Paragon 2-Piece Rear Rotors. These high-performance 350mm x 22mm rotors offer increased thermal capacity, reduced unsprung weight, and improved consistency for track and performance street use — all while integrating seamlessly with your factory ABS and brake system.

Overview

Paragon’s fully floating 2-piece rotors are designed to manage heat under aggressive driving. Directional ventilation vanes increase airflow through the rotor core, helping to reduce operating temperatures by up to 30% compared to OEM. Slotted faces improve bite, clean pad contact, and clear gases and water for consistent performance in all conditions. With a rotor diameter upgrade from 310mm to 350mm, this kit offers stronger rear brake balance while saving unsprung weight.

Key Features

• 350 x 22mm slotted rear rotors – replaces OEM 310mm rotors
• Directional cooling vanes – up to 30% better cooling efficiency
• Floating 2-piece design allows thermal expansion and self-centering
• CM-250 high-carbon alloy cast iron rotor rings – heat-treated and CBN-machined
• Lateral run-out ≤ 0.03mm; balanced within 2g for vibration-free operation
• Improved wet-weather performance and reduced fade
• Weight: 6.47 kg per rotor vs OEM 6.85 kg – lower unsprung mass
• Includes CNC-machined steel caliper carriers for correct spacing
• Rotor-to-hat mount: H-Bobbin system (8-bolt)

Construction

Rotor hats are precision CNC-machined from aerospace-grade 6061-T6 aluminium and hard anodised to MIL-A-8625 Type III specification. Excess material is removed to reduce weight while maintaining structural integrity, making them ideal for both road and track use.

Finish Options

• Clear Hard Anodised: Track-ready finish that resists discolouration under extreme heat
• Black Dyed Hardcoat: May discolour above 260°C – better suited for street applications

Vehicle Fitment

• VW & Audi MQB platform vehicles with rear 310mm rotors (verify fitment before ordering)

Fitment Notes

• Direct bolt-on installation – no modifications required
• Maintains OEM brake bias and ABS functionality
• Compatible with OEM and aftermarket pads (same pad depth)
• Includes caliper spacers for proper alignment with larger rotors

Shop all Paragon Performance brake upgrades