PARAGON 2-Piece Front Rotors
Not sure which option fits your application? Contact Us - we're happy to help.
PARAGON 2-Piece Front Rotors - Tesla Model S / Model X (Factory Iron Brakes) - 355 x 32mm
These Paragon 2-piece front rotors replace the 355 x 32mm factory discs on the Tesla Model S and Model X. Each rotor weighs 9.6kg, about 3.7kg less than OEM, which takes a big chunk of unsprung mass off these heavy cars. The slotted ring floats on a 6061-T6 aluminium hat with directional cooling vanes.
Choose the hat finish: black dyed hardcoat, or clear hard anodised. Clear hats will not discolour under extreme heat and are the pick for track and race use; black hats can discolour above about 260°C. Both are Mil-Spec Type III anodised 6061-T6 aluminium.
Note: Fits 2012-2020 Model S (60 to P100D, RWD and AWD) and 2015-2020 Model X (75D to P100D), front axle. Installation by a professional is recommended.
Features
- 355 x 32mm slotted 2-piece rotors, sold as a front pair
- Floating design cuts fade and judder in long sessions
- CM-250 high-carbon alloy cast iron rings, heat treated and CBN machined
- 48 directional vanes run up to 30% cooler than OE rotors
- Slotted face keeps the pad surface clean and helps in the wet
- Lateral run-out within 0.03mm, balanced within 2 g
- 6061-T6 aluminium hats, Mil-Spec Type III hard anodised
- Saves about 3.7kg of unsprung weight per rotor vs OEM
- Rotor-to-hat mounting: D-Bobbin, 10-bolt
- Direct replacement for Tesla 1025099-00-B
- Works with the factory ABS and keeps the factory brake bias
Pairs Well With
Need help confirming fitment? Contact our team at sales@chicaneaustralia.com.au.
Product
- Brand
- Paragon
- Rotor size
- 355 x 32mm
- Hat finish options
- Black hardcoat / clear hard anodised
- Part number(s)
- P2R.061.355.320.20900.08.01.01.F / P2R.061.355.320.20900.08.01.02.F
Details
- Product
- 2-piece floating rotors (front pair)
- Minimum thickness
- 30mm
- Construction
- 2-piece floating, slotted, directional vanes
- Ring material
- CM-250 high-carbon alloy cast iron, CBN machined
- Hat material
- 6061-T6 aluminium, Mil-Spec Type III anodised
- Rotor-to-hat mounting
- D-Bobbin, 10-bolt
- Weight (each)
- 9.6 kg
- Lateral run-out
- Within 0.03mm
- Replaces
- Tesla 1025099-00-B
- Fits
- Tesla Model S 2012-2020 and Model X 2015-2020, front, all versions Paragon lists
Contents
- 1 x pair of Paragon 355 x 32mm 2-piece rotor assemblies with aluminium hats, stainless steel bobbins and anti-rattle clips (assembled, ready to fit)
- Installation manual
Vehicle fitment
Universal fit: this part suits any car. Check the specifications above for sizes and fittings.
| Make | Model | Chassis | Years | Versions | Engine | Brakes | Position |
|---|
Can’t see your car? Ask us and we’ll check fitment for you.

Need Help Finding the Right Part?
We’ll Track It Down for You
We know how frustrating it can be searching for the right part. If it’s not listed on our site, that doesn’t mean we can’t source it.
Fill out the quick form below and our team will track it down for you.

