PARAGON 2-Piece Front Rotors
Not sure which option fits your application? Contact Us - we're happy to help.
PARAGON 2-Piece Front Rotors - Porsche 911 GT3 / GT3 RS / GT2 RS (997.2) - 380 x 32mm
Paragon's 2-piece front rotors for the 997.2 GT3, GT3 RS and GT2 RS pair a slotted, directionally vented 380 x 32mm iron ring with a floating aluminium hat. They bolt straight on in place of the factory cross-drilled discs and work with the OEM calipers, ABS and brake bias. The directional vanes run cooler than the factory rotors for less fade and judder in long track sessions.
Choose the hat finish: black dyed hardcoat, or clear hard anodised. Clear hats will not discolour under extreme heat and are the pick for track and race use; black hats can discolour above about 260°C. Both are Mil-Spec Type III anodised 6061-T6 aluminium.
Note: Fits 2009-2011 997.2 GT3, GT3 RS and GT2 RS front, on cars with factory iron brakes or PCCB. Use OEM pads or aftermarket pads with the same pad depth. Installation by a professional is recommended.
Features
- 380 x 32mm slotted 2-piece rotors, sold as a front pair
- Floating design cuts fade and judder in long sessions
- CM-250 high-carbon alloy cast iron rings, heat treated and CBN machined
- 48 directional vanes run up to 30% cooler than OE rotors
- Slotted face keeps the pad surface clean and helps in the wet
- Lateral run-out within 0.03mm, balanced within 2 g
- 6061-T6 aluminium hats, Mil-Spec Type III hard anodised
- Replaces the factory cross-drilled discs
- Rotor-to-hat mounting: D-Bobbin (long), 12-bolt
- Direct replacement for Porsche 99735140992 / 99735141092 / 99735103100 / 98135103201
- Works with the factory ABS and keeps the factory brake bias
Pairs Well With
Need help confirming fitment? Contact our team at sales@chicaneaustralia.com.au.
Product
- Brand
- Paragon
- Rotor size
- 380 x 32mm
- Hat finish options
- Black hardcoat / clear hard anodised
- Part number(s)
- P2R.225.380.320.23050.09.01.01.F / P2R.225.380.320.23050.09.01.02.F
Details
- Product
- 2-piece floating rotors (front pair)
- Minimum thickness
- 30mm
- Construction
- 2-piece floating, slotted, directional vanes
- Ring material
- CM-250 high-carbon alloy cast iron, CBN machined
- Hat material
- 6061-T6 aluminium, Mil-Spec Type III anodised
- Rotor-to-hat mounting
- D-Bobbin (long), 12-bolt
- Lateral run-out
- Within 0.03mm
- Replaces
- Porsche 99735140992 / 99735141092 / 99735103100 / 98135103201
- Fits
- Porsche 911 GT3 / GT3 RS / GT2 RS (997.2) 2009-2011 front, factory iron brakes or PCCB
Contents
- 1 x pair of Paragon 380 x 32mm 2-piece rotor assemblies with aluminium hats, stainless steel bobbins and anti-rattle clips (assembled, ready to fit)
- Installation manual
Vehicle fitment
Universal fit: this part suits any car. Check the specifications above for sizes and fittings.
| Make | Model | Chassis | Years | Versions | Engine | Brakes | Position |
|---|
Can’t see your car? Ask us and we’ll check fitment for you.

Need Help Finding the Right Part?
We’ll Track It Down for You
We know how frustrating it can be searching for the right part. If it’s not listed on our site, that doesn’t mean we can’t source it.
Fill out the quick form below and our team will track it down for you.

