PARAGON 2-Piece Front Rotors (M Performance Brakes)
Not sure which option fits your application? Contact Us - we're happy to help.
PARAGON 2-Piece Front Rotors (M Performance Brakes) - BMW 2 Series (F22) / 3 Series (F30) / 4 Series (F32) - 370 x 30mm
Paragon's 370 x 30mm 2-piece front rotors replace the factory discs on BMW F22, F30 and F32 models fitted with the larger M Performance front brakes. Each rotor weighs 10.6kg, and the slotted ring is fully floated on a 6061-T6 aluminium hat with directional cooling vanes.
Choose the hat finish: black dyed hardcoat, or clear hard anodised. Clear hats will not discolour under extreme heat and are the pick for track and race use; black hats can discolour above about 260°C. Both are Mil-Spec Type III anodised 6061-T6 aluminium.
Note: For the 370mm front brakes only. Four-cylinder cars (228i/230i, 320i/328i/330i, 428i/430i) need the M Performance brake kit. Six-cylinder cars (M235i/M240i, 335i/340i, 435i/440i) need the M Performance kit or the S2NHA M Sport/ZTR brakes. Check your build options by VIN before ordering. Installation by a professional is recommended.
Features
- 370 x 30mm slotted 2-piece rotors, sold as a front pair
- Floating design cuts fade and judder in long sessions
- CM-250 high-carbon alloy cast iron rings, heat treated and CBN machined
- 48 directional vanes run up to 30% cooler than OE rotors
- Slotted face keeps the pad surface clean and helps in the wet
- Lateral run-out within 0.03mm, balanced within 2 g
- 6061-T6 aluminium hats, Mil-Spec Type III hard anodised
- Rotor-to-hat mounting: H-Bobbin, 10-bolt
- Direct replacement for BMW 34106797603 / 34106797606
- Works with the factory ABS and keeps the factory brake bias
Pairs Well With
Need help confirming fitment? Contact our team at sales@chicaneaustralia.com.au.
Product
- Brand
- Paragon
- Rotor size
- 370 x 30mm
- Hat finish options
- Black hardcoat / clear hard anodised
- Part number(s)
- P2R.014.370.300.20500.05.01.01.F / P2R.014.370.300.20500.05.01.02.F
Details
- Product
- 2-piece floating rotors (front pair)
- Minimum thickness
- 28mm
- Construction
- 2-piece floating, slotted, directional vanes
- Ring material
- CM-250 high-carbon alloy cast iron, CBN machined
- Hat material
- 6061-T6 aluminium, Mil-Spec Type III anodised
- Rotor-to-hat mounting
- H-Bobbin, 10-bolt
- Weight (each)
- 10.6 kg
- Lateral run-out
- Within 0.03mm
- Replaces
- BMW 34106797603 / 34106797606
- Fits
- BMW F22 228i/230i/M235i/M240i, F30 320i/328i/330i/335i/340i, F32 428i/430i/435i/440i with 370mm M Performance (or S2NHA M Sport on six-cylinder) front brakes (RWD)
Contents
- 1 x pair of Paragon 370 x 30mm 2-piece rotor assemblies with aluminium hats, stainless steel bobbins and anti-rattle clips (assembled, ready to fit)
- Installation manual
Vehicle fitment
Universal fit: this part suits any car. Check the specifications above for sizes and fittings.
| Make | Model | Chassis | Years | Versions | Engine | Brakes | Position |
|---|
Can’t see your car? Ask us and we’ll check fitment for you.

Need Help Finding the Right Part?
We’ll Track It Down for You
We know how frustrating it can be searching for the right part. If it’s not listed on our site, that doesn’t mean we can’t source it.
Fill out the quick form below and our team will track it down for you.

