PARAGON 2-Piece Front Rotors (Larger Rotor)
Not sure which option fits your application? Contact Us - we're happy to help.
PARAGON 2-Piece Front Rotors (Larger Rotor) - Tesla Model 3 (RWD / Long Range) - 365 x 25mm
This Paragon big-rotor kit replaces the 320mm factory front discs on the Tesla Model 3 with 365 x 25mm 2-piece rotors. The larger diameter adds leverage and thermal mass, and brackets are included to move the calipers out to suit. Each rotor weighs 7.8kg, with directional vanes replacing the factory pillar-vane design.
Choose the hat finish: black dyed hardcoat, or clear hard anodised. Clear hats will not discolour under extreme heat and are the pick for track and race use; black hats can discolour above about 260°C. Both are Mil-Spec Type III anodised 6061-T6 aluminium.
Note: Fits 2017-on Model 3 Rear-Wheel Drive and Long Range (dual motor AWD). Not for the AWD Performance or cars with Performance Upgrade Package (PUP) brakes. Needs 19in or larger wheels, and not every 19in wheel clears: check with Paragon's wheel fitment template. The steering knuckle needs a slight modification. Installation by a professional is recommended.
Features
- 365 x 25mm slotted 2-piece rotors, sold as a front pair
- Floating design cuts fade and judder in long sessions
- CM-250 high-carbon alloy cast iron rings, heat treated and CBN machined
- 48 directional vanes run up to 30% cooler than OE rotors
- Slotted face keeps the pad surface clean and helps in the wet
- Lateral run-out within 0.03mm, balanced within 2 g
- 6061-T6 aluminium hats, Mil-Spec Type III hard anodised
- 45mm larger than the 320mm factory rotor
- Caliper relocation brackets included
- Directional vanes replace the factory pillar-vane design
- Rotor-to-hat mounting: D-Bobbin (long), 10-bolt
- Direct replacement for Tesla 1044611-00-D
- Works with the factory ABS and keeps the factory brake bias
Need help confirming fitment? Contact our team at sales@chicaneaustralia.com.au.
Product
- Brand
- Paragon
- Rotor size
- 365 x 25mm
- Hat finish options
- Black hardcoat / clear hard anodised
- Part number(s)
- P2R.048.365.250.23800.08.01.01.F / P2R.048.365.250.23800.08.01.02.F
Details
- Product
- 2-piece floating rotors (front pair)
- Minimum thickness
- 23mm
- Construction
- 2-piece floating, slotted, directional vanes
- Ring material
- CM-250 high-carbon alloy cast iron, CBN machined
- Hat material
- 6061-T6 aluminium, Mil-Spec Type III anodised
- Rotor-to-hat mounting
- D-Bobbin (long), 10-bolt
- Weight (each)
- 7.8 kg
- Lateral run-out
- Within 0.03mm
- Replaces
- Tesla 1044611-00-D
- Fits
- Tesla Model 3 2017-on Rear-Wheel Drive and Long Range AWD, front; not Performance or PUP brakes; 19in or larger wheels
Contents
- 1 x pair of Paragon 365 x 25mm 2-piece rotor assemblies with aluminium hats, stainless steel bobbins and anti-rattle clips (assembled, ready to fit)
- Pair of caliper brackets
- Installation manual
Vehicle fitment
Universal fit: this part suits any car. Check the specifications above for sizes and fittings.
| Make | Model | Chassis | Years | Versions | Engine | Brakes | Position |
|---|
Can’t see your car? Ask us and we’ll check fitment for you.

Need Help Finding the Right Part?
We’ll Track It Down for You
We know how frustrating it can be searching for the right part. If it’s not listed on our site, that doesn’t mean we can’t source it.
Fill out the quick form below and our team will track it down for you.

