PARAGON 2-Piece Front Rotors (Larger Rotor)
Not sure which option fits your application? Contact Us - we're happy to help.
PARAGON 2-Piece Front Rotors (Larger Rotor) - Tesla Model 3 Performance / Model Y (AWD) - 385 x 28mm
Paragon's oversize 2-piece front rotors lift the Tesla Model 3 Performance and Model Y from the factory 355 x 25mm disc to 385 x 28mm. The bigger, thicker ring adds thermal capacity, and directional vanes replace the factory pillar-vane design for cooler running. Each assembly weighs 10 kg and bolts on with the supplied brackets.
Choose the hat finish: black dyed hardcoat, or clear hard anodised. Clear hats will not discolour under extreme heat and are the pick for track and race use; black hats can discolour above about 260°C. Both are Mil-Spec Type III anodised 6061-T6 aluminium.
Note: Fits Model 3 AWD Performance (dual motor) and cars with the Performance Upgrade Package brakes, plus Model Y AWD Long Range and Performance. Not all wheels clear the larger rotor: Paragon has test-fitted the OEM Model Y Induction 20 x 9.5 +45 and Uberturbine 21 x 9.5 +40; check other wheels with Paragon's fitment template. The hats are 3.5mm thicker than factory, pushing the wheels out 3.5mm and fixing the OEM hub clearance issue (no hub-centric step ring needed). Installation by a professional is recommended.
Features
- 385 x 28mm slotted 2-piece rotors, sold as a front pair
- Floating design cuts fade and judder in long sessions
- CM-250 high-carbon alloy cast iron rings, heat treated and CBN machined
- 48 directional vanes run up to 30% cooler than OE rotors
- Slotted face keeps the pad surface clean and helps in the wet
- Lateral run-out within 0.03mm, balanced within 2 g
- 6061-T6 aluminium hats, Mil-Spec Type III hard anodised
- 30mm larger and 3mm thicker than the factory 355 x 25mm rotor
- Hats sit 3.5mm wider than factory, solving the OEM wheel hub clearance issue
- Billet aluminium brackets included
- Rotor-to-hat mounting: D-Bobbin (long), 10-bolt
- Direct replacement for Tesla 1044616-00-D
- Works with the factory ABS and keeps the factory brake bias
Pairs Well With
Need help confirming fitment? Contact our team at sales@chicaneaustralia.com.au.
Product
- Brand
- Paragon
- Rotor size
- 385 x 28mm
- Hat finish options
- Black hardcoat / clear hard anodised
- Part number(s)
- P2R.048.385.280.24000.08.01.01.F / P2R.048.385.280.24000.08.01.02.F
Details
- Product
- 2-piece floating rotors (front pair)
- Minimum thickness
- 26mm
- Construction
- 2-piece floating, slotted, directional vanes
- Ring material
- CM-250 high-carbon alloy cast iron, CBN machined
- Hat material
- 6061-T6 aluminium, Mil-Spec Type III anodised
- Rotor-to-hat mounting
- D-Bobbin (long), 10-bolt
- Weight (each)
- 10 kg
- Lateral run-out
- Within 0.03mm
- Replaces
- Tesla 1044616-00-D
- Fits
- Tesla Model 3 AWD Performance (and PUP brakes), Model Y AWD Long Range / Performance front
Contents
- 1 x pair of Paragon 385 x 28mm 2-piece rotor assemblies with aluminium hats, stainless steel bobbins and anti-rattle clips (assembled, ready to fit)
- Pair of anodised billet aluminium brackets
- Installation manual
Vehicle fitment
Universal fit: this part suits any car. Check the specifications above for sizes and fittings.
| Make | Model | Chassis | Years | Versions | Engine | Brakes | Position |
|---|
Can’t see your car? Ask us and we’ll check fitment for you.

Need Help Finding the Right Part?
We’ll Track It Down for You
We know how frustrating it can be searching for the right part. If it’s not listed on our site, that doesn’t mean we can’t source it.
Fill out the quick form below and our team will track it down for you.

