PARAGON 2-Piece Front Rotors (Iron Conversion)
Not sure which option fits your application? Contact Us - we're happy to help.
PARAGON 2-Piece Front Rotors (Iron Conversion) - McLaren 570S / 570GT (P13) - 394 x 36mm
This Paragon iron conversion swaps the factory carbon ceramic front discs on the McLaren 570S and 570GT for 394 x 36mm 2-piece cast iron rotors. Iron rings handle repeated track use well and cost far less to replace than carbon ceramics. The floating aluminium hats bolt on with the OEM calipers and ABS.
Choose the hat finish: black dyed hardcoat, or clear hard anodised. Clear hats will not discolour under extreme heat and are the pick for track and race use; black hats can discolour above about 260°C. Both are Mil-Spec Type III anodised 6061-T6 aluminium.
Note: For 570S (2015-2021) and 570GT with factory carbon ceramic brakes only. Use OEM pads or aftermarket pads with the same pad depth. Installation by a professional is recommended.
Features
- 394 x 36mm slotted 2-piece rotors, sold as a front pair
- Floating design cuts fade and judder in long sessions
- CM-250 high-carbon alloy cast iron rings, heat treated and CBN machined
- 48 directional vanes run up to 30% cooler than OE rotors
- Slotted face keeps the pad surface clean and helps in the wet
- Lateral run-out within 0.03mm, balanced within 2 g
- 6061-T6 aluminium hats, Mil-Spec Type III hard anodised
- Converts factory carbon ceramic discs to cast iron
- Rotor-to-hat mounting: D-Bobbin (long), 12-bolt
- Direct replacement for McLaren 11C0771CP
- Works with the factory ABS and keeps the factory brake bias
Pairs Well With
Need help confirming fitment? Contact our team at sales@chicaneaustralia.com.au.
Product
- Brand
- Paragon
- Rotor size
- 394 x 36mm
- Hat finish options
- Black hardcoat / clear hard anodised
- Part number(s)
- P2R.213.394.360.23970.09.01.01.F / P2R.213.394.360.23970.09.01.02.F
Details
- Product
- 2-piece floating rotors (front pair)
- Minimum thickness
- 34mm
- Construction
- 2-piece floating, slotted, directional vanes
- Ring material
- CM-250 high-carbon alloy cast iron, CBN machined
- Hat material
- 6061-T6 aluminium, Mil-Spec Type III anodised
- Rotor-to-hat mounting
- D-Bobbin (long), 12-bolt
- Lateral run-out
- Within 0.03mm
- Replaces
- McLaren 11C0771CP
- Fits
- McLaren 570S / 570GT front, factory carbon ceramic brakes (iron conversion)
Contents
- 1 x pair of Paragon 394 x 36mm 2-piece rotor assemblies with aluminium hats, stainless steel bobbins and anti-rattle clips (assembled, ready to fit)
- Installation manual
Vehicle fitment
Universal fit: this part suits any car. Check the specifications above for sizes and fittings.
| Make | Model | Chassis | Years | Versions | Engine | Brakes | Position |
|---|
Can’t see your car? Ask us and we’ll check fitment for you.

Need Help Finding the Right Part?
We’ll Track It Down for You
We know how frustrating it can be searching for the right part. If it’s not listed on our site, that doesn’t mean we can’t source it.
Fill out the quick form below and our team will track it down for you.

