PARAGON 2-Piece Front Rotors (Brembo Brakes)
Not sure which option fits your application? Contact Us - we're happy to help.
PARAGON 2-Piece Front Rotors (Brembo Brakes) - Subaru BRZ (ZC6) / Toyota 86 (ZN6) - 326 x 30mm
Built for the Subaru BRZ and Toyota 86 running the factory Brembo 4-piston front calipers, these Paragon 2-piece rotors replace the 326 x 30mm OEM discs. Each rotor weighs 7.8kg, about 1.3kg less than the factory part, and the slotted ring floats on a 6061-T6 aluminium hat for better heat control on track.
Choose the hat finish: black dyed hardcoat, or clear hard anodised. Clear hats will not discolour under extreme heat and are the pick for track and race use; black hats can discolour above about 260°C. Both are Mil-Spec Type III anodised 6061-T6 aluminium.
Note: Only for cars with the factory Brembo 4-piston front calipers: the BRZ tS, the 86 with the Brembo performance package, or a car converted to that Brembo setup. Not for the standard single-piston brakes. Installation by a professional is recommended.
Features
- 326 x 30mm slotted 2-piece rotors, sold as a front pair
- Floating design cuts fade and judder in long sessions
- CM-250 high-carbon alloy cast iron rings, heat treated and CBN machined
- 48 directional vanes run up to 30% cooler than OE rotors
- Slotted face keeps the pad surface clean and helps in the wet
- Lateral run-out within 0.03mm, balanced within 2 g
- 6061-T6 aluminium hats, Mil-Spec Type III hard anodised
- Saves about 1.3kg of unsprung weight per rotor vs OEM
- Rotor-to-hat mounting: D-Bobbin (long), 10-bolt
- Direct replacement for Subaru 26300FE001 / 26300FE000 / 26300FE070
- Works with the factory ABS and keeps the factory brake bias
Pairs Well With
Need help confirming fitment? Contact our team at sales@chicaneaustralia.com.au.
Product
- Brand
- Paragon
- Rotor size
- 326 x 30mm
- Hat finish options
- Black hardcoat / clear hard anodised
- Part number(s)
- P2R.045.326.300.18000.08.03.01.F / P2R.045.326.300.18000.08.03.02.F
Details
- Product
- 2-piece floating rotors (front pair)
- Minimum thickness
- 28mm
- Construction
- 2-piece floating, slotted, directional vanes
- Ring material
- CM-250 high-carbon alloy cast iron, CBN machined
- Hat material
- 6061-T6 aluminium, Mil-Spec Type III anodised
- Rotor-to-hat mounting
- D-Bobbin (long), 10-bolt
- Weight (each)
- 7.8 kg
- Lateral run-out
- Within 0.03mm
- Replaces
- Subaru 26300FE001 / 26300FE000 / 26300FE070
- Fits
- Subaru BRZ (ZC6) incl. BRZ tS and Toyota 86 (ZN6), front, with factory Brembo 4-piston calipers (performance package or swap)
Contents
- 1 x pair of Paragon 326 x 30mm 2-piece rotor assemblies with aluminium hats, stainless steel bobbins and anti-rattle clips (assembled, ready to fit)
- Installation manual
Vehicle fitment
Universal fit: this part suits any car. Check the specifications above for sizes and fittings.
| Make | Model | Chassis | Years | Versions | Engine | Brakes | Position |
|---|
Can’t see your car? Ask us and we’ll check fitment for you.

Need Help Finding the Right Part?
We’ll Track It Down for You
We know how frustrating it can be searching for the right part. If it’s not listed on our site, that doesn’t mean we can’t source it.
Fill out the quick form below and our team will track it down for you.

