aFe Track Series Carbon Fibre Cold Air Intake
Not sure which option fits your application? Contact Us — we're happy to help.
Request a Price Match
Found it cheaper elsewhere? Send us the details and we'll do our best to match it.
Request received
Thanks! Our team will review it and be in touch shortly.
aFe Track Series Carbon Fibre Cold Air Intake - Chevrolet Corvette Stingray (C8) - 6.2L V8
The aFe Track Series Carbon Fibre Cold Air Intake replaces the factory air box on the C8 Corvette Stingray with the 6.2L V8. Two 360-degree radial flow filters with 102mm (4in) flanges and inverted tops sit in an open-element XLPE housing that connects to the factory air inlets on both sides of the car.
Fitment Note
Suits the C8 Corvette Stingray with the 6.2L LT2 V8. The factory radio antenna moves to the aFe housing, which means cutting off two melted plastic mounting tabs. It fits the convertible, but the trim won't fully seal to the boot cover. For convertibles, the aFe Black Series Carbon Fibre intake (58-10007) seals fully; see Pairs Well With.
Video
How to install the aFe Track Series carbon fibre intake on the C8 Corvette 6.2L
A dyno-tuned twill-weave carbon fibre tube (no fibreglass) joins the filters to the engine, saving weight and dressing up the engine bay. Seal trim on the housing edge seals against the plastic boot cover to keep engine heat off the filters while letting more induction sound through.
Options: Pro DRY S uses dry, oil-free three-layer synthetic media that washes clean with no oiling, suited to street and light off-road use; it flows 5% more than stock (550 CFM) and aFe's dyno testing shows up to +4 kW (+5 hp) and +5 Nm. Pro 5R uses pre-oiled five-layer cotton gauze media for the most airflow, washable and reusable; it flows 15% more than stock (605 CFM) with up to +9 kW (+12 hp) and +14 Nm.
Installation by a professional is recommended.
Features
- Twill-weave carbon fibre intake tube, 100% carbon with no fibreglass
- Dual 360-degree radial flow filters with 102mm (4in) flanges
- XLPE housing that connects to both factory side air inlets
- Seal trim seals to the boot cover to block engine heat
- Up to 15% more airflow than the factory intake (Pro 5R)
- Factory harness and mounts transfer to the aFe housing
- Silicone bellows couplings allow for engine movement
Pairs Well With
- aFe Black Series Carbon Fibre Cold Air Intake - Chevrolet Corvette Stingray (C8) - 6.2L V8
- aFe Magnum FORCE Stage-2 Cold Air Intake - Chevrolet Corvette Stingray (C8) - 6.2L V8
Need help choosing an intake for your Corvette? Contact our team at sales@chicaneaustralia.com.au.
Product
- Brand
- aFe Power
- Part number(s)
- 57-10013D (Pro DRY S), 57-10013R (Pro 5R)
Details
- Product
- Cold air intake system (dual filter)
- Product line
- Track Series Carbon Fibre
- Filter media options
- Pro DRY S (dry) or Pro 5R (oiled)
- Filters
- 2 x 360-degree radial flow, 102mm (4in) flange, inverted top
- Housing
- XLPE, connects to both factory side inlets
- Intake tube
- Twill-weave carbon fibre
- Flow gain
- +5% (Pro DRY S, 550 CFM) / +15% (Pro 5R, 605 CFM)
- Power gain
- Up to +4 kW (+5 hp) Pro DRY S / +9 kW (+12 hp) Pro 5R
- Torque gain
- Up to +5 Nm Pro DRY S / +14 Nm Pro 5R
- Filter included
- Yes
- Coupler included
- Yes
Contents
- 1 x XLPE dual-filter housing with seal trim
- 1 x carbon fibre intake tube
- 2 x radial flow air filters (Pro DRY S or Pro 5R)
- Silicone bellows couplings and clamps
- Mounting hardware
Vehicle fitment
Universal fit: this part suits any car. Check the specifications above for sizes and fittings.
| Make | Model | Chassis | Years | Versions | Engine | Brakes | Position |
|---|
Can’t see your car? Ask us and we’ll check fitment for you.
Need Help Finding the Right Part?
We’ll Track It Down for You
We know how frustrating it can be searching for the right part. If it’s not listed on our site, that doesn’t mean we can’t source it.
Fill out the quick form below and our team will track it down for you.