aFe Takeda Stage-2 Cold Air Intake Kia Stinger (CK) 2.0L Turbo

aFe Takeda Stage-2 Cold Air Intake - Kia Stinger (CK) - 2.0L Turbo

The aFe Takeda Stage-2 is an open-element cold air intake for the Kia Stinger 2.0L turbo. A one-piece XLPE (cross-linked polyethylene) housing surrounds the filter to keep out warm engine air, draws cool air from directly behind the front grille through the factory inlet, and leaves the filter on show for a stronger intake sound.

A computer-designed, dyno-tuned XLPE tube resists heat soak and carries air to the turbo, and the radial-flow filter sits on a 4-inch flange. aFe measures 355 CFM with the Pro 5R filter, 65% more than the factory intake, and aFe's dyno testing shows up to +17 kW (+23 hp) and +47 Nm.

Options: Pro DRY S uses dry, oil-free three-layer synthetic media that you wash and refit without oiling; aFe quotes up to +15 kW (+20 hp) and +41 Nm (+30 lb-ft), with 58% more airflow. Pro 5R uses oiled five-layer cotton gauze media for the most airflow and usually the biggest gains; up to +17 kW (+23 hp) and +47 Nm (+35 lb-ft), with 65% more airflow.

Note: Suits the CK Kia Stinger with the 2.0L turbo four-cylinder. Installation by a professional is recommended.

Features

• Open-element XLPE housing keeps warm engine air off the filter
• Draws cool air from behind the grille via the factory inlet
• Up to 65% more airflow than the factory intake (Pro 5R)
• Heat-soak resistant, dyno-tuned XLPE tube
• Radial-flow filter on a 4-inch flange
• Louder induction sound
• Minimal hardware for a quick fit
• Washable, reusable filter

Pairs Well With

• aFe Takeda Momentum Cold Air Intake - Kia Stinger (CK) - 2.0L Turbo

Need help choosing an intake for your Stinger? Contact our team at sales@chicaneaustralia.com.au.