aFe Momentum GT Cold Air Intake Ford F-150 PowerBoost (P702) 3.5L Twin Turbo Hybrid

aFe Momentum GT Cold Air Intake - Ford F-150 PowerBoost (P702) - 3.5L Twin Turbo Hybrid

The aFe Momentum GT Cold Air Intake replaces the factory air box on the P702 Ford F-150 with the 3.5L twin-turbo PowerBoost hybrid V6. A 229mm (9in) tall, 360-degree radial flow filter with an inverted top sits in a one-piece sealed XLPE housing built around the largest filter that fits, and a dyno-tuned XLPE tube feeds the engine.

The housing takes air from both the factory bonnet inlet scoop and the grille inlet, and a silicone seal along its top seals to the bonnet to keep hot engine air out. A large clear window lets you check the filter without pulling anything apart. aFe's dyno testing shows up to +13 kW (+18 hp) and +37 Nm with Pro 5R and up to +13 kW (+17 hp) and +33 Nm with Pro DRY S.

Options: Pro DRY S uses dry, oil-free three-layer synthetic media that washes clean with no oiling, suited to street and light off-road use; it flows 39% more than stock (620 CFM). Pro 5R uses pre-oiled five-layer cotton gauze media for the most airflow, washable and reusable; it flows 51% more than stock (670 CFM).

Note: Suits the 2021-on P702 F-150 PowerBoost hybrid with the 3.5L twin-turbo V6. Installation by a professional is recommended.

Features

• One-piece sealed XLPE housing with a clear sight window
• Uses the factory bonnet inlet scoop and grille air inlet
• Silicone seal to the bonnet blocks hot engine air
• 229mm (9in) tall radial flow filter with inverted top
• Up to 51% more airflow than the factory intake (Pro 5R, 670 CFM)
• Dyno-tested gains up to +13 kW (+18 hp) and +37 Nm (Pro 5R)
• Stainless steel clamps and silicone couplings

Need help choosing an intake for your F-150? Contact our team at sales@chicaneaustralia.com.au.