aFe Magnum FORCE Stage-2 Cold Air Intake
Not sure which option fits your application? Contact Us — we're happy to help.
Request a Price Match
Found it cheaper elsewhere? Send us the details and we'll do our best to match it.
Request received
Thanks! Our team will review it and be in touch shortly.
aFe Magnum FORCE Stage-2 Cold Air Intake - Chrysler 300C (LX) - 3.5L V6
The aFe Magnum FORCE Stage-2 Cold Air Intake replaces the factory air box and intake tract on the LX Chrysler 300C with the 3.5L V6. A conical, 360-degree filter with a 102mm (4in) flange sits inside a one-piece 18-gauge powder-coated heat shield, and a dyno-tuned, heat-insulating roto-moulded tube carries the air into the engine.
The moulded tube improves volumetric efficiency over the factory tract, and the one-piece heat shield needs little or no assembly. aFe rates the system at 140% more airflow than stock (322 CFM at 1.5in H2O), and its dyno testing shows up to +7 kW (+9 hp) and +16 Nm.
Options: Pro DRY S uses dry, oil-free three-layer synthetic media that washes clean with no oiling, suited to street and light off-road use. Pro 5R uses pre-oiled five-layer cotton gauze media for the most airflow, washable and reusable. aFe quotes the same gains for both.
Note: Suits the LX Chrysler 300C with the 3.5L V6. Installation by a professional is recommended.
Features
- One-piece 18-gauge powder-coated heat shield
- Conical 360-degree filter with a 102mm (4in) flange
- Dyno-tuned, heat-insulating roto-moulded intake tube
- 140% more airflow than the factory intake
- Dyno-tested gains of up to +7 kW (+9 hp) and +16 Nm
- Polyurethane filter frame for long life and repeated cleaning
- Uses all factory mounting locations
Pairs Well With
Need help choosing an intake for your 300C? Contact our team at sales@chicaneaustralia.com.au.
Product
- Brand
- aFe Power
- Part number(s)
- 51-10922 (Pro DRY S), 54-10922 (Pro 5R)
Details
- Product
- Cold air intake system
- Product line
- Magnum FORCE Stage-2
- Filter media options
- Pro DRY S (dry) or Pro 5R (oiled)
- Filter
- Conical 360-degree, 102mm (4in) flange
- Intake tube
- Roto-moulded, heat insulating
- Heat shield
- One-piece 18-gauge powder-coated steel
- Flow gain
- +140% (322 CFM @ 1.5in H2O)
- Power gain
- Up to +7 kW (+9 hp)
- Torque gain
- Up to +16 Nm
- Filter included
- Yes
- Coupler included
- Yes
Contents
- 1 x one-piece powder-coated heat shield
- 1 x roto-moulded intake tube
- 1 x conical air filter (Pro DRY S or Pro 5R)
- Couplings and clamps
- Mounting hardware
Vehicle fitment
Universal fit: this part suits any car. Check the specifications above for sizes and fittings.
| Make | Model | Chassis | Years | Versions | Engine | Brakes | Position |
|---|
Can’t see your car? Ask us and we’ll check fitment for you.
Need Help Finding the Right Part?
We’ll Track It Down for You
We know how frustrating it can be searching for the right part. If it’s not listed on our site, that doesn’t mean we can’t source it.
Fill out the quick form below and our team will track it down for you.