AEM X-Series Tru-Boost Controller Gauge
Not sure which option fits your application? Contact Us — we're happy to help.
Request a Price Match
Found it cheaper elsewhere? Send us the details and we'll do our best to match it.
Request received
Thanks! Our team will review it and be in touch shortly.
AEM X-Series Tru-Boost Controller Gauge - Universal - 80PSIg
AEM's X-Series Tru-Boost Controller Gauge combines a boost control solenoid with a 24 LED sweep gauge, letting you tune and monitor boost pressure without a laptop. Everything is programmed straight from the faceplate buttons, and it suits any turbocharged application running up to 80 PSIg through the internal MAP sensor.
This listing covers the universal AEM Tru-Boost Controller Gauge, SKU 30-0352. It's not vehicle specific, so it fits any turbo setup capable of running the included boost control solenoid and hardware, regardless of make or model.
Key Features
- Two programmable boost levels plus a switch activated scramble boost setting
- Adjustable wastegate crack (open) pressure to reduce boost spikes and improve spool up
- Display in PSIg (PSI), BAR or kPa (PAS), with scalable outer LED sweep
- Peak boost display and adjustable overboost alarm with LED warning output
- Built in overboost protection shuts off the solenoid until manually reset
- Solenoid fault detection for shorted or disconnected wiring
- AEMnet CAN bus datalogging across 13 channels including boost target, duty and solenoid status
- Includes AEM boost control solenoid and all mounting hardware
Wiring diagrams, solenoid specifications and installation notes are provided in the tabs above. Please confirm your turbo system's plumbing and electrical setup before ordering.
Not sure if this gauge suits your build? Contact our team at sales@chicaneaustralia.com.au for expert advice.
Vehicle Compatibility
Universal fitment — verify dimensions before ordering.
Technical Specifications
| Spec | Value |
|---|---|
| Maximum Boost Pressure (Internal MAP Sensor) | 80 PSIg |
| Display Units | PSI, BAR, kPa |
| Programmable Boost Modes | 2 boost levels + time based scramble boost setting |
| Outer LED Display | 24 LEDs (scalable to peak boost level, flash for overboost alert) |
| Datalog Output | 13 channels via AEMnet CAN bus (2-wire connection) |
| Included Hardware | AEM Boost Control Solenoid and mounting hardware |
No instructions available for this product.
Need Help Finding the Right Part?
We’ll Track It Down for You
We know how frustrating it can be searching for the right part. If it’s not listed on our site, that doesn’t mean we can’t source it.
Fill out the quick form below and our team will track it down for you.