SPAL

• SPAL fans by size: every SPAL fan we list, sorted by diameter.
• Brushless fans: 10in, 11in, 12in, 14in, 15.2in, 16in and 19in models in 300W, 500W and 850W ratings, supplied with a jumper harness, in drop-in and flush mount configurations, including the BEAST 3700.
• High performance and high output fans: 9in, 11in, 12in and 16in puller fans with straight, curved and paddle blade designs, plus 12in dual fan assemblies.
• Compact fans: 4in and 5.2in push and pull fans for tight installations.
• Wiring and control: electric fan wiring harness with relay, brushless fan harness adapters, Metri-Pack and standard jumper harnesses, and variable temperature control sensors in 60-74°C, 74-85°C, 79-91°C and 88-102°C ranges.
• Mounting hardware: single and four-pack fan mounting brackets, mounting pins, strap brackets and the VA18 fan shroud gasket.

Browse more brands on our brands page.

• Fan diameter: measure the usable area of your radiator or cooler core so the fan body and shroud sit within it. Diameters here run from 4in to 19in.
• Push or pull: puller fans mount behind the core, pusher fans mount in front of it. Check the listed orientation on each product.
• Drop-in or flush mount: brushless models are offered in both styles, which changes how the fan sits against a shroud or core.
• Power draw: 300W, 500W and 850W brushless options are listed; match the rating to your charging system and wiring capacity.
• Airflow (CFM): brushed fans list rated airflow, from 124 CFM on the 4in push fan up to 3168 CFM for the 12in dual assembly.
• Connectors and sensors: confirm whether you need a standard or Metri-Pack jumper harness, and select a temperature control sensor range that suits your thermostat and coolant operating temperature.

Fan installation typically involves mounting the fan to a shroud, radiator or bracket using the supplied or separately listed brackets, pins or strap mounts, then wiring the fan through an appropriately rated harness, relay and fused supply. Brushless models use a dedicated jumper harness or adapter; some setups also use a variable temperature control sensor to vary fan speed with coolant temperature.

You may also need cable ties, heat-resistant loom, ring terminals, a multimeter and the VA18 shroud gasket where applicable. Electrical work and cooling system access carry real risk of damage or injury if done incorrectly, so installation by a qualified professional is recommended.

Where can I buy SPAL fans in Australia?
Chicane Australia sells SPAL fans, harnesses, sensors and mounting hardware and ships Australia-wide from the NSW Central Coast. Browse fans by size above, search by SPAL part number, or contact our team if you need help choosing a fan.

What is the difference between SPAL brushless and brushed fans?
Brushless fans in this range are rated in watts (300W, 500W and 850W) and use a dedicated jumper harness or adapter, while the brushed high performance and high output fans are rated by airflow in CFM.

Do SPAL brushless fans include a harness?
The brushless fans listed here are supplied with a jumper harness. Additional harness adapters, Metri-Pack jumper harnesses and a wiring harness with relay are also available separately.

Which temperature control sensor should I choose?
Variable temperature control sensors are offered in 60-74°C, 74-85°C, 79-91°C and 88-102°C ranges. Select the range that suits your engine's normal operating temperature and thermostat rating.

What mounting hardware is available?
Single and four-pack fan mounting brackets, mounting pins, strap bracket mounts and the VA18 fan shroud gasket are listed in this collection.