ACUITY K20C / L15B Swap Shifter Adapter Plate Honda Civic (EF / EG / EK) / Integra (DA / DB / DC) 10th Gen Civic Shifters

ACUITY K20C / L15B Swap Shifter Adapter Plate - Honda Civic (EF / EG / EK) / Integra (DA / DB / DC) - 10th Gen Civic Shifters

The ACUITY K20C / L15B Swap Shifter Adapter Plate lets you mount a 10th Gen Civic shifter, including the FK8 Civic Type R shifter, in a 1988 to 2000 Civic (EF, EG, EK) or 1990 to 2001 Integra (DA, DB, DC) that has been swapped to a K20C or L15B turbo engine. Factory or aftermarket 10th Gen shifters both fit.

The plate is machined from 6061-T6 aluminium and black anodised. It bolts to the centre tunnel with two screws and a stud bracket, all fitted from underneath, so one person can install it without loading the factory weld nuts on manual cars. A self-adhesive foam seal is included for manual-chassis cars.

Use it with 10th Gen Civic manual shifter cables. The design assumes the cables pass through the firewall close to the tunnel, either through the old heater core hole or a new hole if you want to keep the heater.

Note: For K20C and L15B swaps using a manual 10th Gen Civic shifter and cables (FK8 Civic Type R or other manual 10th Gen Civic). For other K-series swaps with a DC5 shifter, use the ACUITY 1946 plate. Manual-chassis cars need two 10mm holes drilled; auto-chassis cars need four 10mm holes and some sheet metal ground back. Installation by a professional is recommended.

Features

• Mounts a 10th Gen Civic shifter (including FK8 Type R) in a K20C or L15B swapped EF, EG or EK Civic or DA, DB or DC Integra
• 6061-T6 aluminium with a black anodised finish
• Fitted from under the tunnel with a stud bracket, so one person can install it
• Self-adhesive foam seal for manual-chassis cars
• Suits factory or aftermarket 10th Gen shifters, including the ACUITY 1892 FK8 shifter

Kit Contents

• 1 x ACUITY shifter adapter plate
• 1 x stud bracket
• 2 x M8x1.25 hex flange screws
• 8 x M8x1.25 flange nuts
• 4 x M6 aluminium shifter mounting washers
• 4 x M6x1 socket cap screws (25mm)
• 1 x self-adhesive foam seal

Pairs Well With

• ACUITY Fully Adjustable Performance Short Shifter - Honda Civic Type R (FK8)
• ACUITY Shifter Cable Adapter Bracket - Honda Civic Type R (FN2) - FK8 Shifter Swap
• ACUITY Shifter Base Bushings - Honda Civic Type R (FK8 / FL5)

Need help planning the shifter setup for your K20C or L15B swap? Contact our team at sales@chicaneaustralia.com.au.