Nitto Billet Stroker Crankshaft
Not sure which option fits your application? Contact Us — we're happy to help.
Nitto Billet Stroker Crankshaft - Mitsubishi 4B11T - Lancer Evolution X (CZ4A) / Lancer Ralliart (CJ)
This Nitto 4340 billet crankshaft lengthens the stroke of the Mitsubishi 4B11T to 93 mm, taking the Lancer Evolution X or Ralliart engine to 2.2L. It suits circuit and street builds that want more capacity and torque without losing the engine's ability to rev.
It is made in a single 93 mm stroke and pairs with Nitto's 4B11 2.2L stroker pistons and 143.75 mm connecting rods.
Nitto machines the crank from double-melted 4340 true billet bar rather than a forging or lower-grade bar. The design resists flex under load and reduces harmonics compared with factory cranks. A sample of the same material follows each crank through quenching, heat treatment and nitriding, and is then cut up and checked to confirm each process met Nitto's standard.
Note: Installation by a professional is recommended. Engine internals must be measured and set up by a qualified engine builder.
Features
- Double-melted 4340 billet round bar
- X-ray and sonic grade tested
- Quenched, heat treated and nitrided
- A test sample travels with each crank through heat treatment and nitriding and is metallurgically checked
- Fully counterweighted and balanced
- Knife-edged counterweights (where applicable)
- 100% CNC profiled, drilled and tapped
Warranty
Nitto parts are made for racing and off-road use. Inspect every part during assembly and blueprinting, and contact us before fitting if anything measures out of tolerance. Under Nitto's limited warranty a defective part will be repaired or replaced at Nitto's option, and any modification voids the warranty. Full terms: Nitto limited warranty (PDF).
Pairs Well With
- Nitto I-Beam Connecting Rods - Mitsubishi 4B11T - Lancer Evolution X (CZ4A) / Lancer Ralliart (CJ)
- Nitto H-Beam Connecting Rods - Mitsubishi 4B11T - Lancer Evolution X (CZ4A) / Lancer Ralliart (CJ)
- Nitto Stroker Kit - Mitsubishi 4B11T - Lancer Evolution X (CZ4A) / Lancer Ralliart (CJ)
Shop more: Nitto
Need help choosing parts? Contact our team at sales@chicaneaustralia.com.au.
Vehicle Compatibility
| Make | Model | Chassis | Years | Engine / Notes |
|---|---|---|---|---|
| Mitsubishi | Lancer Evolution X | CZ4A | 2008–2016 | 4B11T |
| Mitsubishi | Lancer Ralliart | CJ | 2008–2015 | 4B11T |
Technical Specifications
| Spec | Value |
|---|---|
| Brand | Nitto |
| Product | Billet stroker crankshaft |
| Engine | Mitsubishi 4B11T |
| Material | 4340 billet steel |
| Stroke | 93 mm (2.2L) |
| Treatment | Quenched, heat treated, nitrided |
| Counterweights | Fully counterweighted, knife-edged where applicable |
| Warranty | Nitto limited warranty (racing use) |
| Instructions | Nitto installation notes (link below) |
| Part number(s) | NIT-CNK-4B11S |
Contents
1 x Nitto 4340 billet crankshaft

Need Help Finding the Right Part?
We’ll Track It Down for You
We know how frustrating it can be searching for the right part. If it’s not listed on our site, that doesn’t mean we can’t source it.
Fill out the quick form below and our team will track it down for you.

