Radium Engineering Nylon Submersible Fuel Tubing Kit with Clamps Universal

Radium Engineering Nylon Submersible Fuel Tubing Kit with Clamps — Universal

Radium Engineering builds fuel system components trusted by tuners and race teams who can't afford a failure. This PA nylon submersible fuel tubing kit is purpose-built for in-tank fuel pump plumbing, using convoluted polyamide nylon tubing that stays flexible, resists all fuel types, and holds pressure well beyond standard EFI demands. Whether you're building a street car on E85 or a full race application, this is a reliable, motorsport-grade solution.

This listing covers the Radium Engineering 20-0175 kit — clear PA nylon tubing with a 5/16" (8mm) inner diameter and 325mm length, supplied with two stainless steel EFI clamps. Multiple variants are available across two inner diameters (8mm and 10mm) and four lengths (165mm, 208mm, 325mm, 450mm). See the variant guide below for part numbers and dimensions.

Note: All variants are translucent clear except 20-0875 and 20-0895, which are opaque black. Before fitting, run hot water over the tube ends to soften the material and allow a secure fit over the barb fitting.

Specifications

• Material: Polyamide (PA) nylon — convoluted flexible construction
• Inner diameters: 8mm (5/16") and 10mm (3/8") depending on variant
• Lengths available: 165mm, 208mm, 325mm, 450mm depending on variant
• Working pressure: 300 PSI
• Burst pressure: 450 PSI
• Fuel compatibility: Pump petrol, E85, methanol, and all exotic fuel blends
• Clamps: Reusable stainless steel, SAE J1508 rated, torque to 1.5 Nm (13.3 in-lbs)
• Clamp design: Rolled edges to protect tubing, 360-degree seal

Kit Contents

• PA nylon convoluted fuel tubing — length and inner diameter per variant selected
• Stainless steel EFI tube clamps x2

Compatible Fuel Pumps

• Walbro GSS341, GSS342 (255LPH)
• Walbro F90000262, F90000267, F90000273, F90000274, F90000285, F90000295
• AEM 50-1000, 50-1200, 50-1220
• Aeromotive 340R 11141, 11142
• DeatschWerks 9-301-1000, DW400, DW440 Brushless
• Bosch Motorsport BR540
• Ti Automotive E5LM Brushless

Pump compatibility, variant dimensions, and fitment notes are provided in the tabs above. Confirm your pump model and required tubing diameter before ordering.

Not sure if this kit suits your build? Contact our team at sales@chicaneaustralia.com.au for expert advice.