PARAGON 2-Piece Front Rotors Audi R8 (42) / RS6 (C5) / Lamborghini Gallardo 365 x 34mm

Motorsport-Grade Braking. Precision Cooling.

Upgrade your Audi or Lamborghini with the ultimate in braking performance and thermal control. Paragon 2-Piece Front Rotors are engineered for serious track-day enthusiasts and high-performance street drivers who demand more than what the factory discs can offer. Designed as a direct bolt-on replacement for the 365mm x 34mm factory rotors, these slotted floating units significantly improve heat resistance and reduce brake fade under extreme conditions.

By utilising a 2-piece floating design, these rotors allow the high-carbon friction ring to expand and contract independently of the aluminium hat during intense thermal cycling. This prevents the warping and "coning" often seen in single-piece rotors, ensuring a consistent pedal feel and smooth braking. Furthermore, the reduction in unsprung mass improves suspension response and turn-in agility, making your vehicle feel more connected to the road.

Key Features

• Enhanced Thermal Stability: Directional cooling vanes pull significantly more air through the disc, allowing it to run up to 30% cooler than OEM alternatives.
• Fully Floating H-Bobbin System: The 10-bolt H-Bobbin mounting system provides a true floating setup, reducing vibration and allowing for unrestricted thermal expansion.
• CM-250 High-Carbon Alloy: The rotor rings are cast from a high-carbon alloy for superior strength and resistance to thermal cracking and warping.
• Slotted Performance: Precision slots increase initial pad bite and provide a path for gas and dust to escape, maintaining consistent friction in both wet and dry conditions.
• Unsprung Weight Savings: At only 10.43 kg per rotor, these units shave 0.68 kg of rotating mass per side compared to standard factory discs.
• Extreme Precision: Every rotor is heat-treated, CBN-machined, and balanced to within 2 grams, ensuring a lateral run-out of ≤0.03mm.

Finish Options

• Hard Anodised (Clear): The definitive track-ready finish. This treatment is highly resistant to heat and will not discolour even under the most punishing circuit conditions.
• Black Hardcoat (Dyed): A sleek, stealthy look ideal for street or mixed-use. Please note that black anodising may begin to discolour if surface temperatures exceed 260°C.

Fitment Notes

• Direct bolt-on installation using original OEM calipers.
• Fully compatible with factory ABS systems and maintains original brake bias.
• Compatible with all OEM and aftermarket pads that utilise the factory pad depth (D).