{"title":"Paragon Performance Brakes for Honda Civic Type R","description":"\u003cp\u003eChicane Australia stocks the full Paragon Performance brake rotor range for the Honda Civic Type R — 1-piece cast and 2-piece rotors for both the FK8 and FL5 generations. The Type R is one of the benchmarks for front-wheel-drive performance, and it comes from the factory with genuinely capable Brembo 4-piston front calipers. The limitation is the factory rotors — the FK8 in particular has a well-documented issue with front rotor grooving and uneven wear at relatively low kilometres, and both generations generate significant heat through the front brakes because a front-drive car puts most of its braking load through the nose. Paragon's rotor range solves both problems: better metallurgy to resist grooving and cracking, and (on the 2-piece) replaceable friction rings that eliminate the expensive full-rotor replacement cycle.\u003c\/p\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eThe Paragon Range for Civic Type R\u003c\/strong\u003e\u003c\/summary\u003e\n\u003ch3\u003e1-Piece Cast Rotors — Same Technology, Lower Cost\u003c\/h3\u003e\n\u003cp\u003eParagon's 1-piece cast rotors use the same high-carbon cast iron metallurgy, heat treatment and friction ring design as their 2-piece range — just cast as a single-piece rotor with an integrated hat. You get the Paragon iron quality and the \u003cstrong\u003estraight-groove slot pattern\u003c\/strong\u003e that improves cold bite and pad-gas evacuation, without the cost of the aluminium centre hat and floating hardware. Direct bolt-on to the factory Brembo caliper — same thickness, same diameter, same bolt pattern. The right starting point for Type R owners who want a quality rotor upgrade without the jump to a full 2-piece setup.\u003c\/p\u003e\n\u003ch3\u003e2-Piece Rotors — Weight Reduction, Thermal Isolation \u0026amp; Serviceable Rings\u003c\/h3\u003e\n\u003cp\u003eSame friction ring metallurgy as the 1-piece, bolted to a CNC-machined aluminium centre hat with stainless floating hardware. Three benefits for the Type R specifically:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight reduction\u003c\/strong\u003e — typically 3–4kg per corner versus OEM. On a front-wheel-drive chassis where the front brakes are already overworked, lighter unsprung mass at the front improves turn-in and steering response measurably.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThermal isolation\u003c\/strong\u003e — the aluminium hat insulates the wheel bearing from rotor heat. Important on a car that loads the front brakes as heavily as the Type R does.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaceable friction rings\u003c\/strong\u003e — when the ring wears out, you replace just the ring, not the whole rotor. For FK8 owners who've already been through the OEM rotor cycle, this is a significant long-term cost saving.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eStraight-groove slot pattern as standard. Direct bolt-on to the factory Brembo 4-piston front caliper on FK8 and FL5.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eThe FK8 Rotor Issue — and the Paragon Fix\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eFK8 Civic Type R owners know this story well: the factory front rotors develop grooves and uneven wear at surprisingly low kilometres, often well inside 30,000km, and usually without any track use at all. Honda's OEM pad compound is aggressive enough to leave visible wear patterns on the rotor surface, and the one-piece OEM rotor design means the entire rotor has to be replaced when the friction surface is compromised.\u003c\/p\u003e\n\u003cp\u003eParagon 2-piece rotors solve this permanently. The higher-carbon friction ring is more resistant to the abrasive wear pattern the FK8 generates. And when the ring eventually does wear out — which it will, eventually, because all rotors wear — you replace just the ring, keeping the aluminium hat and the floating hardware. The cost of a replacement ring versus the cost of a new OEM rotor is significant, and over the life of an FK8 ownership the savings stack up quickly.\u003c\/p\u003e\n\u003cp\u003eFor FK8 owners who want the easiest path to fixing the rotor wear problem without the full 2-piece cost, the \u003cstrong\u003eParagon 1-piece cast rotor\u003c\/strong\u003e is also a meaningful upgrade over OEM — same iron quality as the 2-piece ring, just in a one-piece cast form.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment by Generation\u003c\/strong\u003e\u003c\/summary\u003e\n\u003ch3\u003eFK8 Civic Type R (2017–2021)\u003c\/h3\u003e\n\u003cp\u003eThe K20C1-powered FK8 with factory Brembo 4-piston front calipers and 350mm x 32mm front rotors. Paragon 1-piece cast and 2-piece front rotors are direct bolt-on replacements, plus rear rotor fitments for the factory rear caliper. This is the largest Paragon Type R market in Australia — the FK8 is widely tracked, and the OEM rotor issue drives strong demand for a permanent rotor solution.\u003c\/p\u003e\n\u003ch3\u003eFL5 Civic Type R (2023+)\u003c\/h3\u003e\n\u003cp\u003eThe current-generation K20C1-powered FL5 — still with Brembo 4-piston front calipers, revised rotor specifications and a refined brake package. Paragon 2-piece rotors for the FL5 are fitment-specific to the new rotor dimensions — confirm chassis code when ordering. The FL5 is still relatively new to Australian track days, but it's already proving to carry the same front-brake thermal load as the FK8 did.\u003c\/p\u003e\n\u003ch3\u003eFK2 Civic Type R (2015–2016)\u003c\/h3\u003e\n\u003cp\u003eThe Euro-market FK2 Type R is less common in Australia (grey import only — never sold new here) but Paragon does support the platform for owners who have imported one. Contact us for fitment confirmation.\u003c\/p\u003e\n\u003ch3\u003eFD2 Civic Type R (JDM, 2007–2012)\u003c\/h3\u003e\n\u003cp\u003eThe sedan-bodied JDM-only FD2 Type R with K20A naturally aspirated engine. Smaller Paragon rotor range available — typically 1-piece cast options. A niche but genuine Australian grey-import market.\u003c\/p\u003e\n\u003ch3\u003eCivic Type R FK8 Limited Edition \u0026amp; Type R Sport Line\u003c\/h3\u003e\n\u003cp\u003eSame caliper and rotor fitment as the standard FK8. Paragon part numbers are shared across the FK8 range regardless of trim level.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eChoosing the Right Paragon Setup for Your Type R\u003c\/strong\u003e\u003c\/summary\u003e\n\u003ch3\u003eDaily-Driven Type R — Replacing Worn OEM Rotors\u003c\/h3\u003e\n\u003cp\u003eIf your factory rotors are grooved, glazed or warped and you want a permanent fix that won't repeat the cycle, \u003cstrong\u003eParagon 1-piece cast rotors\u003c\/strong\u003e with a low-dust street pad (DIXCEL M Type) are the right starting point. Better iron than OEM, straight-groove slot pattern for cleaner pad surfaces, direct bolt-on to factory caliper.\u003c\/p\u003e\n\u003ch3\u003eSpirited Road \u0026amp; Occasional Track Days\u003c\/h3\u003e\n\u003cp\u003eStep up to \u003cstrong\u003eParagon 2-piece rotors\u003c\/strong\u003e. The weight reduction is felt in steering response on road, and the thermal capacity of the two-piece construction handles weekend track work without cracking. Pair with a DIXCEL Z compound pad for strong bite across the full temperature range.\u003c\/p\u003e\n\u003ch3\u003eRegular Track Days \u0026amp; Time Attack\u003c\/h3\u003e\n\u003cp\u003eThe Type R is an exceptional front-drive track car, but the front brakes do almost all the work — on a FWD chassis the rear brakes contribute comparatively little under heavy braking, which puts disproportionate thermal load on the front. \u003cstrong\u003eParagon 2-piece front rotors\u003c\/strong\u003e with a track-compound pad (DIXCEL ES, RE or Specom) and high-temperature fluid is the proven setup for committed FK8 and FL5 track cars.\u003c\/p\u003e\n\u003ch3\u003eDedicated Competition Build\u003c\/h3\u003e\n\u003cp\u003eFor time attack cars running slicks or semi-slicks, the Paragon 2-piece rotor is typically paired with ducted brake cooling to keep front rotor temps in the working range across a full session. Contact us if you need to spec brake ducting or motorsport-grade pad compounds for a build.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhy Paragon for a Civic Type R?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThree reasons Paragon is the right choice for this platform specifically:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolves the FK8 rotor wear problem permanently\u003c\/strong\u003e — better iron, straight-groove slot pattern, and (on the 2-piece) replaceable rings. The total cost of ownership over a 3–5 year period is significantly lower than cycling through OEM rotors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-heavy brake load demands thermal capacity\u003c\/strong\u003e — FWD cars load the front brakes harder than a RWD or AWD equivalent. Paragon's high-carbon iron metallurgy is engineered for exactly this kind of sustained front-axle thermal cycling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetains the capable factory Brembo caliper\u003c\/strong\u003e — the Type R's factory Brembo 4-pot is genuinely good hardware. Paragon's approach is to pair it with a proper rotor, not replace it with an oversized BBK the chassis doesn't need. Budget goes where it actually improves performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/details\u003e\n\u003cp\u003eChicane Australia is your Australian stockist for Paragon Performance. All products are genuine Paragon supplied direct from the manufacturer, with straight-groove slot pattern as standard on rotors. Australian-held stock on popular Civic Type R fitments — both FK8 and FL5 — with direct-order capability for less common configurations.\u003c\/p\u003e\n\u003cp\u003eWant a complete brake package for your Type R? Pair Paragon rotors with \u003ca href=\"\/collections\/dixcel-brakes\"\u003eDIXCEL brake pads\u003c\/a\u003e for a proven bolt-on combination that solves both the rotor and pad-compound sides of the factory brake package. Working on a broader Type R build? See the full \u003ca href=\"\/collections\/paragon\"\u003eParagon brand page\u003c\/a\u003e for other applications.\u003c\/p\u003e\n\u003cp\u003eNot sure which Paragon setup is right for your chassis, wheels and driving style? \u003ca href=\"\/pages\/contact\"\u003eContact us\u003c\/a\u003e or email \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e — we'll work through fitment and pad match with you.\u003c\/p\u003e\n\u003cp\u003e\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"CollectionPage\",\n  \"name\": \"Paragon Performance Brakes for Honda Civic Type R\",\n  \"description\": \"Paragon Performance brake rotors for Honda Civic Type R FK8 and FL5. 1-piece cast and 2-piece rotors — the permanent fix for FK8 OEM rotor grooving. Direct bolt-on Brembo fitment.\",\n  \"url\": \"https:\/\/www.chicaneaustralia.com.au\/collections\/paragon-civic-type-r\",\n  \"isPartOf\": {\n    \"@type\": \"WebSite\",\n    \"name\": \"Chicane Australia\",\n    \"url\": \"https:\/\/www.chicaneaustralia.com.au\"\n  },\n  \"about\": {\n    \"@type\": \"Brand\",\n    \"name\": \"Paragon Performance\",\n    \"url\": \"https:\/\/www.chicaneaustralia.com.au\/collections\/paragon\",\n    \"sameAs\": \"https:\/\/paragonbrakes.com\/\"\n  },\n  \"mainEntity\": {\n    \"@type\": \"Vehicle\",\n    \"name\": \"Honda Civic Type R\",\n    \"brand\": {\n      \"@type\": \"Brand\",\n      \"name\": \"Honda\"\n    }\n  }\n}\n\u003c\/script\u003e \u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"BreadcrumbList\",\n  \"itemListElement\": [\n    {\n      \"@type\": \"ListItem\",\n      \"position\": 1,\n      \"name\": \"Home\",\n      \"item\": \"https:\/\/www.chicaneaustralia.com.au\"\n    },\n    {\n      \"@type\": \"ListItem\",\n      \"position\": 2,\n      \"name\": \"Paragon Performance\",\n      \"item\": \"https:\/\/www.chicaneaustralia.com.au\/collections\/paragon\"\n    },\n    {\n      \"@type\": \"ListItem\",\n      \"position\": 3,\n      \"name\": \"Paragon for Honda Civic Type R\",\n      \"item\": \"https:\/\/www.chicaneaustralia.com.au\/collections\/paragon-civic-type-r\"\n    }\n  ]\n}\n\u003c\/script\u003e\u003c\/p\u003e","products":[{"product_id":"paragon-2-piece-front-brake-rotor-pair-honda-civic-type-r-fk8-fl5-350x32mm","title":"PARAGON 2-Piece Front Rotors – Honda Civic Type R (FK8\/FL5) – 350 x 32mm","description":"\u003cp\u003eEngineered for serious track use and high-performance street driving, the Paragon 2-Piece Front Rotors offer superior heat management, reduced unsprung mass, and consistent braking performance for the Honda Civic Type R FK8 and FL5. These 350x32mm rotors provide a direct bolt-on upgrade that works seamlessly with the OEM Brembo braking system.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose Paragon Rotors?\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSolves common grooving issues found in 2017–2019 FK8 OEM rotors\u003c\/li\u003e\n  \u003cli\u003eSlotted design offers better modulation and consistency under load\u003c\/li\u003e\n  \u003cli\u003eTrack-tested performance with significant weight savings\u003c\/li\u003e\n  \u003cli\u003eLower-cost alternative to full big brake kits\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e350 x 32mm slotted 2-piece front rotors with directional cooling vanes\u003c\/li\u003e\n  \u003cli\u003eRuns up to 30% cooler than OEM discs to resist fade and thermal cracking\u003c\/li\u003e\n  \u003cli\u003eCM-250 high-carbon alloy cast iron rotor rings for durability and bite\u003c\/li\u003e\n  \u003cli\u003eStress-relieved and CBN-machined for true flatness and pad contact\u003c\/li\u003e\n  \u003cli\u003eLateral run-out \u0026lt; 0.03mm; balanced within 2 grams per rotor\u003c\/li\u003e\n  \u003cli\u003eFloating H-Bobbin (8 bolt) design for controlled thermal expansion\u003c\/li\u003e\n  \u003cli\u003eSlotted face is less prone to cracking than OEM drilled rotors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eConstruction\u003c\/h2\u003e\n\u003cp\u003eRotor hats are CNC-machined from aerospace-grade 6061-T6 aluminium and MIL-A-8625 Type III hard anodised to resist corrosion and thermal wear. Excess material is removed to reduce weight while preserving structural integrity under extreme load.\u003c\/p\u003e\n\n\u003ch3\u003eFinish Options\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClear Hard Anodised:\u003c\/strong\u003e Ideal for track use – won’t discolour under extreme heat\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlack Dyed Hardcoat:\u003c\/strong\u003e May discolour above 260°C (500°F) – best for mixed-use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePerformance Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eReduced brake fade and rotor distortion under repeated heavy braking\u003c\/li\u003e\n  \u003cli\u003eImproved modulation and pedal feel\u003c\/li\u003e\n  \u003cli\u003eEffective water shedding and gas dissipation under wet conditions\u003c\/li\u003e\n  \u003cli\u003eWeight: 9.3 kg (20.5 lbs) – approx. 1.8 kg (4 lbs) lighter than OEM per rotor\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eHonda Civic Type R FK8 (2017–2021)\u003c\/li\u003e\n  \u003cli\u003eHonda Civic Type R FL5 (2022+)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFitment Notes\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect bolt-on installation – no modifications required\u003c\/li\u003e\n  \u003cli\u003eWorks with OEM Brembo calipers, ABS, and brake bias\u003c\/li\u003e\n  \u003cli\u003eCompatible with OEM or aftermarket brake pads with the same pad depth (D)\u003c\/li\u003e\n  \u003cli\u003eRotor-to-hat mounting system: H-Bobbin (8 bolt)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eExplore more options in the \u003ca href=\"https:\/\/www.chicaneaustralia.com.au\/collections\/paragon\" target=\"_blank\"\u003e\u003cstrong\u003eParagon Performance Brake Rotors\u003c\/strong\u003e\u003c\/a\u003e collection.\u003c\/em\u003e\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"Mil-Spec Black Coat Anodizing","offer_id":50318874935589,"sku":"P2R.021.350.320.20100.04.03.01.F","price":1495.0,"currency_code":"AUD","in_stock":true},{"title":"Mil-Spec Hard Coat Anodizing","offer_id":50318874968357,"sku":"P2R.021.350.320.20100.04.03.02.F","price":1495.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/Civic-Type-R-FK8-2-pc-Front-Brake-Rotors-Paragon_Performance-1__75126.jpg?v=1749383662"},{"product_id":"paragon-2-piece-rear-brake-rotor-pair-honda-civic-type-r-fk8-fl5-305x11mm","title":"PARAGON 2-Piece Rear Rotors – Honda Civic Type R (FK8\/FL5) – 305 x 11mm","description":"\u003ch2 dir=\"ltr\" class=\"classyunicodedone\"\u003eParagon 2-Piece Rear Brake Rotor Pair - Honda Civic Type R FK8 \/ FL5 - 305x11mm\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eParagon Performance 2-piece Rotor offers superior braking and cooling efficiency optimized for track and race applications. Features greater thermal capacity and increased resistance to cracking under harsh track condition.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMade of CM-250 special formulated high carbon alloy cast iron, it allows for an optimal bite, thermal characteristics, high-temperature strength and durability. Rotor rings are heat treated to release stress in the rotor to avoid deformation and vibration then turned by state-of-the-art CBN surface machining to ensure better break-in with new brake pads.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eVibration is reduced as the rotor lateral run-out is kept within 0.03mm and well-balanced: variations are kept within 2 grams. All rotors went through rigorous quality control procedures and inspections to ensure the rotors are fit for their purposes. A slotted rotor improves braking consistency by maintaining a clean contact surface and dissipate heat generated and gases released when the pads come into contact with the rotors. Slotted rotors have a superior advantage over blank rotors in wet or raining conditions by preventing water films to form between the brake pad and rotor surface. Weighing less than most O.E. rotors while maintaining proper thermal capacity, our 2-piece rotors improves overall handling by saving unsprung mass.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAluminum hats are CNC machined from lightweight 6061-T6 aerospace grade aluminum for high strength and durability under extreme track conditions, then Mil-spec Type III black hardcoat\/hard anodized to increase resistance to wear and corrosion. Unnecessary materials are taken out from the aluminum hats for maximum weight savings while maintaining proper structural integrity.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e*Hard anodized (clear) hats will not discolor under extreme heat, and are highly recommended for track\/race applications. Black hardcoat anodized (dyed) hats are more prone to discoloration under extreme heat (\u0026gt; 500F \/ 260C).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eDirect bolt-on without any modifications and designed to work flawlessly with OEM ABS and brake system while maintaining factory brake bias. \u003c\/span\u003e\u003cspan id=\"docs-internal-guid-e28f64e5-7fff-ad0a-fd92-4722111a2da3\"\u003eCompatible with OEM brake pads or aftermarket pads with the same pad depth (D)\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e2-piece design\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eMinimizing brake fade \u0026amp; judder during extended sessions\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eWeighs 8.8 lbs (4 kg) - save 3 lbs of unsprung weight per rotor vs. OEM\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan id=\"docs-internal-guid-f082184e-7fff-f7fe-57ad-6d343ce9b93a\"\u003eRotor to hat mounting system: Fixed hat, non-floating (8 bolt)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Paragon","offers":[{"title":"Mil-Spec Black Coat Anodizing","offer_id":50318875001125,"sku":"P2R.021.305.110.19650.01.03.01.R","price":1199.0,"currency_code":"AUD","in_stock":true},{"title":"Mil-Spec Hard Coat Anodizing","offer_id":50318875033893,"sku":"P2R.021.305.110.19650.01.03.02.R","price":1199.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/Civic-Type-R-FK8-2-pc-Rear-Rotors-Paragon_Performance-1__13732.jpg?v=1749383666"},{"product_id":"paragon-2-piece-rear-brake-rotor-pair-honda-civic-type-r-fk8-fl5-larger-350x11mm","title":"PARAGON 2-Piece Rear Rotors (Larger Rotor) – Honda Civic Type R (FK8\/FL5) – 350 x 11mm","description":"\u003cp\u003eDesigned for track use and high-performance street driving, the Paragon 2-Piece Rear Brake Rotors improve heat resistance, reduce unsprung weight, and deliver reliable stopping power for the Honda Civic Type R FK8 and FL5. These 305x11mm rotors offer a direct bolt-on upgrade while maintaining full OEM system compatibility.\u003c\/p\u003e\n\n\u003ch2\u003eWhy Choose Paragon Rotors?\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eIncreased thermal capacity for consistent rear braking performance\u003c\/li\u003e\n  \u003cli\u003eSlotted design enhances modulation and wet weather reliability\u003c\/li\u003e\n  \u003cli\u003eSignificant weight savings to improve rear suspension response\u003c\/li\u003e\n  \u003cli\u003eReliable solution for high heat and repeated hard braking\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e305 x 11mm rear rotor size – direct replacement for OEM rear discs\u003c\/li\u003e\n  \u003cli\u003eCM-250 high-carbon alloy cast iron rotor rings for optimal strength and fade resistance\u003c\/li\u003e\n  \u003cli\u003eStress-relieved and CBN-machined for consistent flatness and low vibration\u003c\/li\u003e\n  \u003cli\u003eLateral run-out maintained below 0.03mm; rotors balanced to within 2 grams\u003c\/li\u003e\n  \u003cli\u003eSlotted surface for better gas dissipation and pad contact consistency\u003c\/li\u003e\n  \u003cli\u003eWeighs 4.0 kg (8.8 lbs) – approx. 1.4 kg (3 lbs) lighter per rotor vs OEM\u003c\/li\u003e\n  \u003cli\u003eRotor-to-hat mounting: Fixed hat, non-floating – 8 bolt configuration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eConstruction\u003c\/h2\u003e\n\u003cp\u003eAluminium rotor hats are CNC-machined from aerospace-grade 6061-T6 and MIL-A-8625 Type III hard anodised for superior heat and corrosion resistance. Weight is strategically reduced while retaining the structural integrity needed for repeated aggressive braking.\u003c\/p\u003e\n\n\u003ch3\u003eFinish Options\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClear Hard Anodised:\u003c\/strong\u003e Track-rated finish that resists discolouration under high heat\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBlack Dyed Hardcoat:\u003c\/strong\u003e May discolour above 260°C (500°F), suitable for street\/mixed use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePerformance Benefits\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMinimised brake fade and judder under repeated track sessions\u003c\/li\u003e\n  \u003cli\u003eEnhanced braking consistency in both wet and dry conditions\u003c\/li\u003e\n  \u003cli\u003eWeight savings contribute to sharper suspension response\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eHonda Civic Type R FK8 (2017–2021)\u003c\/li\u003e\n  \u003cli\u003eHonda Civic Type R FL5 (2022+)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFitment Notes\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect bolt-on installation – no modifications required\u003c\/li\u003e\n  \u003cli\u003eMaintains OEM brake bias and ABS compatibility\u003c\/li\u003e\n  \u003cli\u003eCompatible with OEM or aftermarket brake pads using the same pad depth (D)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cem\u003eExplore more options in the \u003ca href=\"https:\/\/www.chicaneaustralia.com.au\/collections\/paragon\" target=\"_blank\"\u003e\u003cstrong\u003eParagon Performance Brake Rotors\u003c\/strong\u003e\u003c\/a\u003e collection.\u003c\/em\u003e\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"Mil-Spec Black Coat Anodizing","offer_id":50318875066661,"sku":"P2R.021.350.110.24200.01.01.01.R","price":1449.0,"currency_code":"AUD","in_stock":true},{"title":"Mil-Spec Hard Coat Anodizing","offer_id":50318875099429,"sku":"P2R.021.350.110.24200.01.01.02.R","price":1449.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/Civic-Type-R-FK8-350mm-Rear-Rotor-Kit-Paragon-Performance-2__65816.jpg?v=1749383669"},{"product_id":"paragon-6-piston-track-performance-big-brake-kit-honda-civic-type-r-fk8-fl5-front","title":"PARAGON 6-Piston Front Big Brake Kit – Honda Civic Type R (FK8\/FL5)","description":"\u003cp\u003eThis complete, track-ready front big brake kit is a major upgrade for the Honda Civic Type R (FK8 \/ FL5), delivering superior braking power, thermal efficiency, and weight savings over the OEM setup. Featuring Paragon’s PA015 or PA035 6-piston calipers, this system is engineered for consistent performance under high heat and repeated use. The only difference between the caliper models is the maximum rotor size supported—giving you flexibility based on your driving needs.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eParagon PA015 \/ PA035 6-piston forged aluminium calipers\u003cbr\u003e\u003cem\u003eNote: PA015 and PA035 calipers differ only in the maximum rotor size supported\u003c\/em\u003e\n\u003c\/li\u003e\n  \u003cli\u003eFully-floating 2-piece slotted rotors with 72 directional curved ventilation vanes\u003c\/li\u003e\n  \u003cli\u003eUp to 30% cooler rotor operation compared to OEM\u003c\/li\u003e\n  \u003cli\u003eCaliper finish options: hard-anodised or ENP electroless nickel plating\u003c\/li\u003e\n  \u003cli\u003eHard-anodised 6061-T6 aluminium rotor hats for improved resistance to heat, wear, and discolouration\u003c\/li\u003e\n  \u003cli\u003ePiston sizes optimised for FK8 \/ FL5 – fully compatible with OEM ABS and master cylinder\u003c\/li\u003e\n  \u003cli\u003eCompatible with OEM rear brakes with minimal change in brake bias\u003c\/li\u003e\n  \u003cli\u003eSaves 4kg (8.8 lbs) of unsprung weight vs. OEM (FK8 2017–2019 with 355mm kit)\u003c\/li\u003e\n  \u003cli\u003eDelivers excellent bite, modulation, thermal stability, and fade resistance during extended sessions\u003c\/li\u003e\n  \u003cli\u003eComplete pre-assembled front axle kit – direct bolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eConstruction Details:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eCalipers:\u003c\/u\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: Forged 6061-T6 aluminium\u003c\/li\u003e\n  \u003cli\u003ePiston sizes: 27mm \/ 31.8mm \/ 38.1mm\u003c\/li\u003e\n  \u003cli\u003eSeals: High-temperature, motorsport-grade\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cu\u003eRotors:\u003c\/u\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: CM-250 high-carbon alloy cast iron\u003c\/li\u003e\n  \u003cli\u003eDesign: 2-piece floating, slotted face with 72 curved directional vanes\u003c\/li\u003e\n  \u003cli\u003eHats: 6061-T6 billet aluminium, hard-anodised\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eVehicle Compatibility:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eHonda Civic Type R (FK8) – 2017–2021\u003c\/li\u003e\n  \u003cli\u003eHonda Civic Type R (FL5) – 2023 onwards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eDirect bolt-on installation – no modifications required\u003c\/li\u003e\n  \u003cli\u003eFully compatible with OEM ABS, master cylinder, and rear braking system\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eTechnical Specifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCaliper Model\u003c\/td\u003e\n\u003ctd\u003ePA015 \/ PA035 6-Piston Forged Aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003ePiston Sizes\u003c\/td\u003e\n\u003ctd\u003e27 \/ 31.8 \/ 38.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eRotor Design\u003c\/td\u003e\n\u003ctd\u003e2-Piece Floating, Slotted, 72 Curved Vanes\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCooling Performance\u003c\/td\u003e\n\u003ctd\u003eUp to 30% cooler than OEM\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eCaliper Finish\u003c\/td\u003e\n\u003ctd\u003eHard-Anodised or ENP Nickel\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003eHat Material\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Aluminium, Hard-Anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cstrong\u003eBrowse the full \u003ca href=\"\/collections\/paragon\"\u003eParagon collection\u003c\/a\u003e for more performance upgrades.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"Mil-Spec Hard Coat Anodizing \/ P2 Street Performance \/ 355x32mm 72 vane Rotor - PA035 Caliper","offer_id":50326756163877,"sku":"PBK.02.021.355.320.TL.01.02.Px.F.P2","price":3975.0,"currency_code":"AUD","in_stock":true},{"title":"Mil-Spec Hard Coat Anodizing \/ P2 Street Performance \/ 370x36mm 72 vane Rotor - PA035 Caliper","offer_id":50326755901733,"sku":"PBK.05.021.370.360.TL.01.02.Px.F.P2","price":4425.0,"currency_code":"AUD","in_stock":true},{"title":"Mil-Spec Hard Coat Anodizing \/ P3 Road \u0026 Track \/ 355x32mm 72 vane Rotor - PA035 Caliper","offer_id":50326756098341,"sku":"PBK.02.021.355.320.TL.01.02.Px.F.P3","price":3975.0,"currency_code":"AUD","in_stock":true},{"title":"Mil-Spec Hard Coat Anodizing \/ P3 Road \u0026 Track \/ 370x36mm 72 vane Rotor - PA035 Caliper","offer_id":50326755836197,"sku":"PBK.05.021.370.360.TL.01.02.Px.F.P3","price":4425.0,"currency_code":"AUD","in_stock":true},{"title":"Mil-Spec Hard Coat Anodizing \/ R5 Track \u0026 Competition \/ 355x32mm 72 vane Rotor - PA035 Caliper","offer_id":50326756229413,"sku":"PBK.02.021.355.320.TL.01.02.Px.F.R5","price":4080.0,"currency_code":"AUD","in_stock":true},{"title":"Mil-Spec Hard Coat Anodizing \/ R5 Track \u0026 Competition \/ 370x36mm 72 vane Rotor - PA035 Caliper","offer_id":50326755967269,"sku":"PBK.05.021.370.360.TL.01.02.Px.F.R5","price":4530.0,"currency_code":"AUD","in_stock":true},{"title":"Mil-Spec Hard Coat Anodizing \/ R7 Track \u0026 Competition \/ 355x32mm 72 vane Rotor - PA035 Caliper","offer_id":50326756294949,"sku":"PBK.02.021.355.320.TL.01.02.Px.F.R7","price":4145.0,"currency_code":"AUD","in_stock":true},{"title":"Mil-Spec Hard Coat Anodizing \/ R7 Track \u0026 Competition \/ 370x36mm 72 vane Rotor - PA035 Caliper","offer_id":50326756032805,"sku":"PBK.05.021.370.360.TL.01.02.Px.F.R7","price":4595.0,"currency_code":"AUD","in_stock":true},{"title":"ENP electroless nickel plated finish \/ P2 Street Performance \/ 355x32mm 72 vane Rotor - PA035 Caliper","offer_id":50326756196645,"sku":"PBK.02.021.355.320.TL.01.02.Px.F.P2.ENP","price":4275.0,"currency_code":"AUD","in_stock":true},{"title":"ENP electroless nickel plated finish \/ P2 Street Performance \/ 370x36mm 72 vane Rotor - PA035 Caliper","offer_id":50326755934501,"sku":"PBK.05.021.370.360.TL.01.02.Px.F.P2.ENP","price":4725.0,"currency_code":"AUD","in_stock":true},{"title":"ENP electroless nickel plated finish \/ P3 Road \u0026 Track \/ 355x32mm 72 vane Rotor - PA035 Caliper","offer_id":50326756131109,"sku":"PBK.02.021.355.320.TL.01.02.Px.F.P3.ENP","price":4275.0,"currency_code":"AUD","in_stock":true},{"title":"ENP electroless nickel plated finish \/ P3 Road \u0026 Track \/ 370x36mm 72 vane Rotor - PA035 Caliper","offer_id":50326755868965,"sku":"PBK.05.021.370.360.TL.01.02.Px.F.P3.ENP","price":4725.0,"currency_code":"AUD","in_stock":true},{"title":"ENP electroless nickel plated finish \/ R5 Track \u0026 Competition \/ 355x32mm 72 vane Rotor - PA035 Caliper","offer_id":50326756262181,"sku":"PBK.02.021.355.320.TL.01.02.Px.F.R5.ENP","price":4380.0,"currency_code":"AUD","in_stock":true},{"title":"ENP electroless nickel plated finish \/ R5 Track \u0026 Competition \/ 370x36mm 72 vane Rotor - PA035 Caliper","offer_id":50326756000037,"sku":"PBK.05.021.370.360.TL.01.02.Px.F.R5.ENP","price":4830.0,"currency_code":"AUD","in_stock":true},{"title":"ENP electroless nickel plated finish \/ R7 Track \u0026 Competition \/ 355x32mm 72 vane Rotor - PA035 Caliper","offer_id":50326756327717,"sku":"PBK.02.021.355.320.TL.01.02.Px.F.R7.ENP","price":4445.0,"currency_code":"AUD","in_stock":true},{"title":"ENP electroless nickel plated finish \/ R7 Track \u0026 Competition \/ 370x36mm 72 vane Rotor - PA035 Caliper","offer_id":50326756065573,"sku":"PBK.05.021.370.360.TL.01.02.Px.F.R7.ENP","price":4895.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/Paragon-Big-Brake-Kit-380mm_1050x706_b87762b9-28dc-4f37-b6f6-9f197e464acf.jpg?v=1742959590"},{"product_id":"paragon-titanium-brake-pad-shims-front-ctr-fk2-fk8-evo-5-10-wrx-sti","title":"PARAGON Titanium Brake Pad Shims Front – Civic Type R (FK8\/FL5) \/ Evo 5-10 \/ WRX STI","description":"\u003cp data-start=\"77\" data-end=\"527\"\u003eEnhance your vehicle’s braking performance and thermal management with Paragon Titanium Brake Pad Shims. Crafted from premium Grade 5 Titanium (6AL-4V \/ ASTM B348), these shims provide an effective thermal barrier, reducing heat transfer from the brake pads to calipers and hydraulic systems. Ideal for track and race environments, they help prevent brake fluid boil and fade, maintaining consistent pedal feel and braking power when it matters most.\u003c\/p\u003e\n\u003cp data-start=\"529\" data-end=\"715\"\u003eProtect your investment by reducing heat-related damage to caliper seals, dust boots, and brake fluid. Lower long-term maintenance costs and avoid premature wear of braking components.\u003c\/p\u003e\n\u003cp data-start=\"717\" data-end=\"735\"\u003e\u003cstrong data-start=\"717\" data-end=\"733\"\u003eKey Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"736\" data-end=\"1184\"\u003e\n\u003cli data-start=\"736\" data-end=\"799\"\u003e\n\u003cp data-start=\"738\" data-end=\"799\"\u003eHelps prevent brake fade and fluid boil for improved safety\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"800\" data-end=\"864\"\u003e\n\u003cp data-start=\"802\" data-end=\"864\"\u003eReduces caliper and brake fluid temperatures under heavy use\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"865\" data-end=\"922\"\u003e\n\u003cp data-start=\"867\" data-end=\"922\"\u003eProtects caliper seals and extends component lifespan\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"923\" data-end=\"995\"\u003e\n\u003cp data-start=\"925\" data-end=\"995\"\u003ePrevents soft brake pedal and fluid degradation after track sessions\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"996\" data-end=\"1047\"\u003e\n\u003cp data-start=\"998\" data-end=\"1047\"\u003eMaterial: Grade 5 Titanium (6AL-4V \/ ASTM B348)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1048\" data-end=\"1069\"\u003e\n\u003cp data-start=\"1050\" data-end=\"1069\"\u003eThickness: 0.5 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1070\" data-end=\"1108\"\u003e\n\u003cp data-start=\"1072\" data-end=\"1108\"\u003eSet of 4 shims (complete axle set)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1109\" data-end=\"1184\"\u003e\n\u003cp data-start=\"1111\" data-end=\"1184\"\u003eCompatible with OEM calipers and both factory or aftermarket brake pads\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1186\" data-end=\"1233\"\u003e\u003cstrong data-start=\"1186\" data-end=\"1231\"\u003eVehicle Fitment – Front Axle Applications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"1234\" data-end=\"1879\"\u003e\n\u003cli data-start=\"1234\" data-end=\"1272\"\u003e\n\u003cp data-start=\"1236\" data-end=\"1272\"\u003e2017–2021 Honda Civic Type R (FK8)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1273\" data-end=\"1307\"\u003e\n\u003cp data-start=\"1275\" data-end=\"1307\"\u003e2023+ Honda Civic Type R (FL5)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1308\" data-end=\"1344\"\u003e\n\u003cp data-start=\"1310\" data-end=\"1344\"\u003e2024+ Acura Integra Type S (DE5)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1345\" data-end=\"1383\"\u003e\n\u003cp data-start=\"1347\" data-end=\"1383\"\u003e2015–2016 Honda Civic Type R (FK2)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1384\" data-end=\"1423\"\u003e\n\u003cp data-start=\"1386\" data-end=\"1423\"\u003e2010–2016 Hyundai Genesis Coupe 3.8\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1424\" data-end=\"1466\"\u003e\n\u003cp data-start=\"1426\" data-end=\"1466\"\u003eMitsubishi EVO 5–10 (CP9A, CT9A, CZ4A)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1467\" data-end=\"1545\"\u003e\n\u003cp data-start=\"1469\" data-end=\"1545\"\u003e2004–2017 Subaru WRX STI (GDB, GRF, GVF, VAB) w\/ OEM Brembo 4-Pot Calipers\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1546\" data-end=\"1628\"\u003e\n\u003cp data-start=\"1548\" data-end=\"1628\"\u003eSubaru BRZ Performance Package \/ Scion FR-S \/ Toyota 86 w\/ OEM Brembo Calipers\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1629\" data-end=\"1646\"\u003e\n\u003cp data-start=\"1631\" data-end=\"1646\"\u003eSubaru BRZ tS\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1647\" data-end=\"1674\"\u003e\n\u003cp data-start=\"1649\" data-end=\"1674\"\u003e2011–2012 Audi RS3 (8P)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1675\" data-end=\"1704\"\u003e\n\u003cp data-start=\"1677\" data-end=\"1704\"\u003e2009–2014 Audi TT RS (8J)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1705\" data-end=\"1762\"\u003e\n\u003cp data-start=\"1707\" data-end=\"1762\"\u003eHolden Commodore Redline w\/ OEM 4-Pot Brembo Calipers\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1763\" data-end=\"1791\"\u003e\n\u003cp data-start=\"1765\" data-end=\"1791\"\u003e2003–2009 Cadillac CTS-V\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1792\" data-end=\"1819\"\u003e\n\u003cp data-start=\"1794\" data-end=\"1819\"\u003eRenault Megane 3 RS 250\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1820\" data-end=\"1843\"\u003e\n\u003cp data-start=\"1822\" data-end=\"1843\"\u003eRenault Megane 4 RS\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1844\" data-end=\"1879\"\u003e\n\u003cp data-start=\"1846\" data-end=\"1879\"\u003e2012–2013 Ford Mustang Boss 302\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1881\" data-end=\"1915\"\u003e\u003cstrong data-start=\"1881\" data-end=\"1897\"\u003ePart Number:\u003c\/strong\u003e PPS.0370.01.050\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"Default Title","offer_id":50502211600677,"sku":"PPS.0370.01.050","price":129.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/PPS370-FK8-Titanium-Pad-Shim-Paragon-Performance-1__20702.1623389424.jpg?v=1747272217"},{"product_id":"paragon-anti-squeal-shims-civic-type-r-fk8-fl5-front","title":"PARAGON Anti-Squeal Shims Front – Honda Civic Type R (FK8\/FL5)","description":"\u003cp data-start=\"111\" data-end=\"451\"\u003eReduce brake noise and improve ride comfort with Paragon Anti-Squeal Shims. Designed to absorb vibrations and minimise brake squeal, these self-adhesive shims fit easily between your brake pads and calipers. Made from OEM-grade material, they offer a precise fit and effective noise reduction. Ideal for both OEM and aftermarket brake pads.\u003c\/p\u003e\n\u003cp data-start=\"453\" data-end=\"471\"\u003e\u003cstrong data-start=\"453\" data-end=\"469\"\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"472\" data-end=\"763\"\u003e\n\u003cli data-start=\"472\" data-end=\"543\"\u003e\n\u003cp data-start=\"474\" data-end=\"543\"\u003eReduces brake squeal and vibration for a quieter driving experience\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"544\" data-end=\"601\"\u003e\n\u003cp data-start=\"546\" data-end=\"601\"\u003eSelf-adhesive backing for quick and easy installation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"602\" data-end=\"667\"\u003e\n\u003cp data-start=\"604\" data-end=\"667\"\u003eCompatible with stock calipers and OEM\/aftermarket brake pads\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"668\" data-end=\"714\"\u003e\n\u003cp data-start=\"670\" data-end=\"714\"\u003eIncludes 4 shims (complete front axle set)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"715\" data-end=\"763\"\u003e\n\u003cp data-start=\"717\" data-end=\"763\"\u003ePrecision-cut from high-quality OEM material\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"765\" data-end=\"786\"\u003e\u003cstrong data-start=\"765\" data-end=\"784\"\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"787\" data-end=\"1097\"\u003e\n\u003cli data-start=\"787\" data-end=\"831\"\u003e\n\u003cp data-start=\"789\" data-end=\"831\"\u003e2017–2021 Honda Civic Type R FK8 (Front)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"832\" data-end=\"872\"\u003e\n\u003cp data-start=\"834\" data-end=\"872\"\u003e2023+ Honda Civic Type R FL5 (Front)\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"916\" data-end=\"952\"\u003e\n\u003cp data-start=\"918\" data-end=\"952\"\u003e2002–2017 Subaru WRX STI (Front)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"953\" data-end=\"1003\"\u003e\n\u003cp data-start=\"955\" data-end=\"1003\"\u003eMitsubishi EVO 5-10 (CP9A, CT9A, CZ4A) (Front)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1004\" data-end=\"1097\"\u003e\n\u003cp data-start=\"1006\" data-end=\"1097\"\u003eSubaru BRZ Performance Package \/ Scion FR-S \/ Toyota 86 (with OEM Brembo calipers, Front)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1099\" data-end=\"1127\" data-is-last-node=\"\" data-is-only-node=\"\"\u003e\u003cstrong data-start=\"1099\" data-end=\"1115\"\u003ePart Number:\u003c\/strong\u003e PPS.0370.02\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"Default Title","offer_id":50502211993893,"sku":"PPS.0370.02","price":50.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/ProductDefault_d0fdc93c-bca3-477b-ab2e-66c30b1a7d7b.gif?v=1747270089"},{"product_id":"paragon-anti-squeal-shims-civic-type-r-fk8-fl5-rear","title":"PARAGON Anti-Squeal Shims Rear – Honda Civic Type R (FK8\/FL5)","description":"\u003cp data-start=\"0\" data-end=\"548\"\u003eReduce brake noise and improve driving comfort with Paragon Anti-Squeal Brake Pad Shims. Designed to absorb vibrations and minimise unwanted brake squeal, these self-adhesive shims install easily between your brake pads and calipers. Cut from the same high-quality OEM material, Paragon shims ensure a precise fit and effective noise reduction. Suitable for both OEM and aftermarket brake pads, these are the perfect upgrade for quieter, more refined braking performance.\u003c\/p\u003e\n\u003cp data-start=\"550\" data-end=\"568\"\u003e\u003cstrong data-start=\"550\" data-end=\"566\"\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"569\" data-end=\"837\"\u003e\n\u003cli data-start=\"569\" data-end=\"626\"\u003e\n\u003cp data-start=\"571\" data-end=\"626\"\u003eReduces brake squeal and vibration for a quieter ride\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"627\" data-end=\"684\"\u003e\n\u003cp data-start=\"629\" data-end=\"684\"\u003eSelf-adhesive backing for quick and easy installation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"685\" data-end=\"744\"\u003e\n\u003cp data-start=\"687\" data-end=\"744\"\u003eCompatible with stock calipers and OEM\/aftermarket pads\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"745\" data-end=\"790\"\u003e\n\u003cp data-start=\"747\" data-end=\"790\"\u003eIncludes 4 shims (complete rear axle set)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"791\" data-end=\"837\"\u003e\n\u003cp data-start=\"793\" data-end=\"837\"\u003eMade from precision-cut OEM-grade material\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"839\" data-end=\"860\"\u003e\u003cstrong data-start=\"839\" data-end=\"858\"\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"861\" data-end=\"1030\"\u003e\n\u003cli data-start=\"861\" data-end=\"904\"\u003e\n\u003cp data-start=\"863\" data-end=\"904\"\u003e2017–2021 Honda Civic Type R FK8 (Rear)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"905\" data-end=\"944\"\u003e\n\u003cp data-start=\"907\" data-end=\"944\"\u003e2023+ Honda Civic Type R FL5 (Rear)\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"987\" data-end=\"1030\"\u003e\n\u003cp data-start=\"989\" data-end=\"1030\"\u003e2016–2020 Honda Civic (All Trims, Rear)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1032\" data-end=\"1060\" data-is-last-node=\"\" data-is-only-node=\"\"\u003e\u003cstrong data-start=\"1032\" data-end=\"1048\"\u003ePart Number:\u003c\/strong\u003e PPS.1557.02\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"Default Title","offer_id":50502213533989,"sku":"PPS.1557.02","price":50.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/civic-type-r-fk8-fl5-rear-anti-squeal-shims-1__51218.1678694121.jpg?v=1747270834"}],"url":"https:\/\/www.chicaneaustralia.com.au\/collections\/paragon-civic-type-r.oembed","provider":"Chicane Australia","version":"1.0","type":"link"}