{"title":"Nissan Skyline GT-R R32 Performance Parts \u0026 Upgrades","description":"","products":[{"product_id":"paragon-6-piston-track-performance-big-brake-kit-nissan-skyline-r32-r33-gtr-front","title":"PARAGON 6-Piston Front Big Brake Kit – Nissan Skyline R32 \/ R33 (GT-R \/ GTT)","description":"\u003ch2\u003ePARAGON 6-Piston Front Big Brake Kit – Nissan Skyline R32 \/ R33 (GT-R \/ GTT)\u003c\/h2\u003e\n\u003cp\u003eThis complete front big brake kit suits all Nissan Skyline R32 and R33 models, GT-R included. Paragon's PA015 or PA035 6-piston calipers and high-efficiency floating rotors give stronger bite, better modulation and far more heat capacity for aggressive road driving and circuit work.\u003c\/p\u003e\n\u003cp\u003eChoose 343 x 32mm, 355 x 32mm or 378 x 36mm rotors, hard anodised or ENP caliper finish, and Paragon P2, P3, R5 or R7 pads. The PA015 and PA035 calipers differ only in the maximum rotor size they support.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Direct bolt-on front kit that works with the factory ABS, master cylinder and rear brakes. Check wheel clearance for your chosen rotor size before ordering. Bleed the system with fresh brake fluid and bed in the pads and rotors before hard use. Installation by a professional is recommended.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eParagon PA015 \/ PA035 6-piston calipers, CNC-machined from billet 6061-T6 aluminium\u003c\/li\u003e\n\u003cli\u003eSix staggered pistons for even pad wear\u003c\/li\u003e\n\u003cli\u003eFully floating 2-piece slotted rotors with directional curved vanes, up to 30% cooler than OEM\u003c\/li\u003e\n\u003cli\u003eCM-250 high-carbon cast iron rings on hard anodised 6061-T6 aluminium hats\u003c\/li\u003e\n\u003cli\u003eCaliper finish: hard anodised or ENP nickel plating\u003c\/li\u003e\n\u003cli\u003eHigh-temperature motorsport-grade seals\u003c\/li\u003e\n\u003cli\u003eRetains OEM ABS, master cylinder and rear brakes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKit Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 x Paragon 6-piston front calipers\u003c\/li\u003e\n\u003cli\u003e2 x fully floating 2-piece rotor assemblies\u003c\/li\u003e\n\u003cli\u003e1 x set of Paragon brake pads (compound as selected)\u003c\/li\u003e\n\u003cli\u003e2 x caliper mounting brackets and hardware\u003c\/li\u003e\n\u003cli\u003e2 x Goodridge stainless steel braided brake lines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"Mil-Spec Hard Coat Anodizing \/ P2 Street Performance \/ 343x32 48 vane Rotor - PA015 Caliper","offer_id":50326837657893,"sku":"PBK.02.080.343.320.TL.01.02.P2.F","price":3975.0,"currency_code":"AUD","in_stock":true},{"title":"Mil-Spec Hard Coat Anodizing \/ P2 Street Performance \/ 355x32mm 72 vane Rotor - PA015 Caliper","offer_id":50326837395749,"sku":"PBK.02.080.355.320.TL.01.02.P2.F","price":3975.0,"currency_code":"AUD","in_stock":true},{"title":"Mil-Spec Hard Coat Anodizing \/ P2 Street Performance \/ 378x36mm 72 vane Rotor - PA035 Caliper","offer_id":50326837133605,"sku":"PBK.05.080.378.360.TL.01.02.P2.F","price":4425.0,"currency_code":"AUD","in_stock":true},{"title":"Mil-Spec Hard Coat Anodizing \/ P3 Road \u0026 Track \/ 343x32 48 vane Rotor - PA015 Caliper","offer_id":50326837592357,"sku":"PBK.02.080.343.320.TL.01.02.P3.F","price":3975.0,"currency_code":"AUD","in_stock":true},{"title":"Mil-Spec Hard Coat Anodizing \/ P3 Road \u0026 Track \/ 355x32mm 72 vane Rotor - PA015 Caliper","offer_id":50326837330213,"sku":"PBK.02.080.355.320.TL.01.02.P3.F","price":3975.0,"currency_code":"AUD","in_stock":true},{"title":"Mil-Spec Hard Coat Anodizing \/ P3 Road \u0026 Track \/ 378x36mm 72 vane Rotor - PA035 Caliper","offer_id":50326837068069,"sku":"PBK.05.080.378.360.TL.01.02.P3.F","price":4425.0,"currency_code":"AUD","in_stock":true},{"title":"Mil-Spec Hard Coat Anodizing \/ R5 Track \u0026 Competition \/ 343x32 48 vane Rotor - PA015 Caliper","offer_id":50326837723429,"sku":"PBK.02.080.343.320.TL.01.02.R5.F","price":4080.0,"currency_code":"AUD","in_stock":true},{"title":"Mil-Spec Hard Coat Anodizing \/ R5 Track \u0026 Competition \/ 355x32mm 72 vane Rotor - PA015 Caliper","offer_id":50326837461285,"sku":"PBK.02.080.355.320.TL.01.02.R5.F","price":4080.0,"currency_code":"AUD","in_stock":true},{"title":"Mil-Spec Hard Coat Anodizing \/ R5 Track \u0026 Competition \/ 378x36mm 72 vane Rotor - PA035 Caliper","offer_id":50326837199141,"sku":"PBK.05.080.378.360.TL.01.02.R5.F","price":4530.0,"currency_code":"AUD","in_stock":true},{"title":"Mil-Spec Hard Coat Anodizing \/ R7 Track \u0026 Competition \/ 343x32 48 vane Rotor - PA015 Caliper","offer_id":50326837788965,"sku":"PBK.02.080.343.320.TL.01.02.R7.F","price":4145.0,"currency_code":"AUD","in_stock":true},{"title":"Mil-Spec Hard Coat Anodizing \/ R7 Track \u0026 Competition \/ 355x32mm 72 vane Rotor - PA015 Caliper","offer_id":50326837526821,"sku":"PBK.02.080.355.320.TL.01.02.R7.F","price":4145.0,"currency_code":"AUD","in_stock":true},{"title":"Mil-Spec Hard Coat Anodizing \/ R7 Track \u0026 Competition \/ 378x36mm 72 vane Rotor - PA035 Caliper","offer_id":50326837264677,"sku":"PBK.05.080.378.360.TL.01.02.R7.F","price":4595.0,"currency_code":"AUD","in_stock":true},{"title":"ENP electroless nickel plated finish \/ P2 Street Performance \/ 343x32 48 vane Rotor - PA015 Caliper","offer_id":50326837690661,"sku":"PBK.02.080.343.320.TL.01.02.P2.F.ENP","price":4275.0,"currency_code":"AUD","in_stock":true},{"title":"ENP electroless nickel plated finish \/ P2 Street Performance \/ 355x32mm 72 vane Rotor - PA015 Caliper","offer_id":50326837428517,"sku":"PBK.02.080.355.320.TL.01.02.P2.F.ENP","price":4275.0,"currency_code":"AUD","in_stock":true},{"title":"ENP electroless nickel plated finish \/ P2 Street Performance \/ 378x36mm 72 vane Rotor - PA035 Caliper","offer_id":50326837166373,"sku":"PBK.05.080.378.360.TL.01.02.P2.F.ENP","price":4725.0,"currency_code":"AUD","in_stock":true},{"title":"ENP electroless nickel plated finish \/ P3 Road \u0026 Track \/ 343x32 48 vane Rotor - PA015 Caliper","offer_id":50326837625125,"sku":"PBK.02.080.343.320.TL.01.02.P3.F.ENP","price":4275.0,"currency_code":"AUD","in_stock":true},{"title":"ENP electroless nickel plated finish \/ P3 Road \u0026 Track \/ 355x32mm 72 vane Rotor - PA015 Caliper","offer_id":50326837362981,"sku":"PBK.02.080.355.320.TL.01.02.P3.F.ENP","price":4275.0,"currency_code":"AUD","in_stock":true},{"title":"ENP electroless nickel plated finish \/ P3 Road \u0026 Track \/ 378x36mm 72 vane Rotor - PA035 Caliper","offer_id":50326837100837,"sku":"PBK.05.080.378.360.TL.01.02.P3.F.ENP","price":4725.0,"currency_code":"AUD","in_stock":true},{"title":"ENP electroless nickel plated finish \/ R5 Track \u0026 Competition \/ 343x32 48 vane Rotor - PA015 Caliper","offer_id":50326837756197,"sku":"PBK.02.080.343.320.TL.01.02.R5.F.ENP","price":4380.0,"currency_code":"AUD","in_stock":true},{"title":"ENP electroless nickel plated finish \/ R5 Track \u0026 Competition \/ 355x32mm 72 vane Rotor - PA015 Caliper","offer_id":50326837494053,"sku":"PBK.02.080.355.320.TL.01.02.R5.F.ENP","price":4380.0,"currency_code":"AUD","in_stock":true},{"title":"ENP electroless nickel plated finish \/ R5 Track \u0026 Competition \/ 378x36mm 72 vane Rotor - PA035 Caliper","offer_id":50326837231909,"sku":"PBK.05.080.378.360.TL.01.02.R5.F.ENP","price":4830.0,"currency_code":"AUD","in_stock":true},{"title":"ENP electroless nickel plated finish \/ R7 Track \u0026 Competition \/ 343x32 48 vane Rotor - PA015 Caliper","offer_id":50326837821733,"sku":"PBK.02.080.343.320.TL.01.02.R7.F.ENP","price":4445.0,"currency_code":"AUD","in_stock":true},{"title":"ENP electroless nickel plated finish \/ R7 Track \u0026 Competition \/ 355x32mm 72 vane Rotor - PA015 Caliper","offer_id":50326837559589,"sku":"PBK.02.080.355.320.TL.01.02.R7.F.ENP","price":4445.0,"currency_code":"AUD","in_stock":true},{"title":"ENP electroless nickel plated finish \/ R7 Track \u0026 Competition \/ 378x36mm 72 vane Rotor - PA035 Caliper","offer_id":50326837297445,"sku":"PBK.05.080.378.360.TL.01.02.R7.F.ENP","price":4895.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/Paragon-Big-Brake-Kit-380mm_1050x706_b87762b9-28dc-4f37-b6f6-9f197e464acf.jpg?v=1742959590"},{"product_id":"radium-engineering-fuel-pump-access-covers-transparent","title":"Radium Engineering Fuel Pump Access Covers - Transparent","description":"\u003ch2\u003eRadium Engineering Fuel Pump Access Covers - Transparent\u003c\/h2\u003e\u003cp\u003eRadium Engineering fuel pump access covers are a direct replacement for the factory steel access plates, shielding and protecting the fuel pump module. Each is made from laser etched anodised aluminium with a clear, scratch and UV-resistant plastic window, so you can inspect the pump area without removing the cover.\u003c\/p\u003e\u003cp\u003eThe covers accept the OEM rubber electrical grommet for a standard install, and parts are also supplied for a tidy wire tuck. Use the variant selector to choose your vehicle: Nissan S13 \/ R32 (20-0735), Mazda RX-7 FD (20-0736), 2008–2014 Subaru (20-0745), 2015–2021 Subaru (20-0746), 1989–1997 Mazda MX-5 (20-0836) or 1998–2005 Mazda MX-5 (20-0837).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Each cover suits both RHD and LHD versions of the listed vehicles. Select the correct variant for your chassis before ordering. Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect replacement for the factory steel access plate\u003c\/li\u003e\n\u003cli\u003eLaser etched anodised aluminium\u003c\/li\u003e\n\u003cli\u003eClear scratch and UV-resistant plastic window\u003c\/li\u003e\n\u003cli\u003eCompatible with the OEM electrical grommet\u003c\/li\u003e\n\u003cli\u003eWire tuck grommet and clear block-off seals included\u003c\/li\u003e\n\u003cli\u003eAdhesive foam sealing strip for a sealed fit\u003c\/li\u003e\n\u003cli\u003eCountersunk stainless steel screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fuel-hanger-89-05-mazda-mx-5-pumps-not-included\"\u003eRadium Engineering Fuel Hanger (Pumps Not Included) - Mazda MX-5 (NA \/ NB)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fuel-hanger-surge-tank-mazda-rx7-fd\"\u003eRadium Engineering Fuel Hanger Surge Tank - Mazda RX-7 (FD3S)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fuel-pump-hanger-nissan-s13-r32\"\u003eRadium Engineering Fuel Pump Hanger - Nissan Silvia (S13) \/ Skyline (R32 Excl. GT-R)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fhst-nissan-r32-gtr\"\u003eRadium Engineering FHST - Nissan Skyline GT-R (R32)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fuel-pump-hanger-subaru-wrx-sti-fxt-lgt-08-onwards\"\u003eRadium Engineering Fuel Pump Hanger - Subaru WRX \/ STI (GR \/ GV \/ VA)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Nissan S13 R32","offer_id":50342875201829,"sku":"20-0735","price":139.99,"currency_code":"AUD","in_stock":true},{"title":"Mazda FD RX7","offer_id":50342884114725,"sku":"20-0736","price":139.99,"currency_code":"AUD","in_stock":true},{"title":"08-14 Subaru","offer_id":50342884147493,"sku":"20-0745","price":139.99,"currency_code":"AUD","in_stock":true},{"title":"15-21 Subaru","offer_id":50342884180261,"sku":"20-0746","price":139.99,"currency_code":"AUD","in_stock":true},{"title":"89-97 Mazda MX-5","offer_id":50342884213029,"sku":"20-0836","price":157.99,"currency_code":"AUD","in_stock":true},{"title":"98-05 Mazda MX-5","offer_id":50342889816357,"sku":"20-0837","price":157.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/20-0735.jpg?v=1743480962"},{"product_id":"paragon-4-piston-track-performance-big-brake-kit-front-nissan-skyline-r32-r33-240sx-s13-s14-s15","title":"PARAGON 4-Piston Front Big Brake Kit – Nissan Skyline (R32\/R33) \/ Silvia (S13\/S14\/S15)","description":"\u003ch2\u003ePARAGON 4-Piston Front Big Brake Kit – Nissan Skyline (R32\/R33) \/ Silvia (S13\/S14\/S15)\u003c\/h2\u003e\u003cp\u003eA complete, pre-assembled front big brake kit for the Nissan Skyline (R32\/R33) and Silvia (S13\/S14\/S15), developed and proven in endurance racing with Paragon's PA055 4-piston calipers. It delivers reliable, high-performance braking on the street and at the track.\u003c\/p\u003e\u003cp\u003eThe kit uses 330 x 28mm 2-piece rotors. Choose a hard anodised or ENP (electroless nickel plated) caliper finish and a Paragon P2, P3, R5 or R7 pad compound.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Direct bolt-on with no modifications; retains the OEM ABS, master cylinder and rear brakes. Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eParagon PA055 4-piston calipers, proven in endurance racing (25 Hours of Thunderhill)\u003c\/li\u003e\n\u003cli\u003e330 x 28mm fully floating 2-piece rotors with directional ventilation vanes, running up to 30% cooler than OEM\u003c\/li\u003e\n\u003cli\u003eHard anodised rotor hats resist heat, wear and discolouration\u003c\/li\u003e\n\u003cli\u003ePiston sizes matched to the OEM ABS and master cylinder\u003c\/li\u003e\n\u003cli\u003eWorks with the OEM rear brakes\u003c\/li\u003e\n\u003cli\u003eComplete pre-assembled front axle kit\u003c\/li\u003e\n\u003cli\u003ePiston sizes tailored to each platform\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKit Contents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2 x Paragon PA055 4-piston calipers\u003c\/li\u003e\n\u003cli\u003e2 x fully floating 2-piece rotor assemblies (330 x 28mm)\u003c\/li\u003e\n\u003cli\u003e1 x set of Paragon brake pads (compound as selected)\u003c\/li\u003e\n\u003cli\u003e2 x caliper mounting brackets and hardware\u003c\/li\u003e\n\u003cli\u003e2 x Goodridge stainless steel braided brake lines\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"Mil-Spec Hard Coat Anodizing \/ P2 Street Performance \/ 330x28mm - PA055 Caliper","offer_id":50357970174245,"sku":"PBK.06.080.330.280.TL.03.02.P2.F","price":3875.0,"currency_code":"AUD","in_stock":true},{"title":"ENP electroless nickel plated finish \/ P2 Street Performance \/ 330x28mm - PA055 Caliper","offer_id":50357970207013,"sku":"PBK.06.080.330.280.TL.03.02.P2.F.ENP","price":4175.0,"currency_code":"AUD","in_stock":true},{"title":"Mil-Spec Hard Coat Anodizing \/ P3 Road \u0026 Track \/ 330x28mm - PA055 Caliper","offer_id":50357970239781,"sku":"PBK.06.080.330.280.TL.03.02.P3.F","price":3875.0,"currency_code":"AUD","in_stock":true},{"title":"ENP electroless nickel plated finish \/ P3 Road \u0026 Track \/ 330x28mm - PA055 Caliper","offer_id":50357970272549,"sku":"PBK.06.080.330.280.TL.03.02.P3.F.ENP","price":4175.0,"currency_code":"AUD","in_stock":true},{"title":"Mil-Spec Hard Coat Anodizing \/ R5 Track \u0026 Competition \/ 330x28mm - PA055 Caliper","offer_id":50357970305317,"sku":"PBK.06.080.330.280.TL.03.02.R5.F","price":3980.0,"currency_code":"AUD","in_stock":true},{"title":"ENP electroless nickel plated finish \/ R5 Track \u0026 Competition \/ 330x28mm - PA055 Caliper","offer_id":50357970338085,"sku":"PBK.06.080.330.280.TL.03.02.R5.F.ENP","price":4280.0,"currency_code":"AUD","in_stock":true},{"title":"Mil-Spec Hard Coat Anodizing \/ R7 Track \u0026 Competition \/ 330x28mm - PA055 Caliper","offer_id":50357970370853,"sku":"PBK.06.080.330.280.TL.03.02.R7.F","price":4045.0,"currency_code":"AUD","in_stock":true},{"title":"ENP electroless nickel plated finish \/ R7 Track \u0026 Competition \/ 330x28mm - PA055 Caliper","offer_id":50357970403621,"sku":"PBK.06.080.330.280.TL.03.02.R7.F.ENP","price":4345.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/Paragon-Track-Performance-4-Piston-PA055-Front-Brake-Kit-4__79210.jpg?v=1743718558"},{"product_id":"paragon-4-piston-track-performance-big-brake-kit-rear-nissan-skyline-r32-r33-gtr","title":"PARAGON 4-Piston Rear Big Brake Kit – Nissan Skyline (R32\/R33)","description":"\u003ch2\u003ePARAGON 4-Piston Rear Big Brake Kit – Nissan Skyline (R32\/R33)\u003c\/h2\u003e\u003cp\u003eThis Paragon Track Performance rear big brake kit is a complete, pre-assembled rear axle upgrade for the Nissan Skyline R32 and R33 (all trims, including GT-R). Paragon PA025 4-piston calipers and fully floating 2-piece rotors with 48 directional vanes handle high thermal loads, running up to 30% cooler than OEM for consistent rear braking lap after lap.\u003c\/p\u003e\u003cp\u003eThe kit is offered with 355 x 32mm rotors, a choice of Paragon P2, P3, R5 or R7 pad compounds, and hard anodised or ENP (electroless nickel plated) caliper finishes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Retains the OEM handbrake \/ E-brake function. Piston sizing is matched to work with the OEM ABS and master cylinder. Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eParagon PA025 4-piston rear calipers\u003c\/li\u003e\n\u003cli\u003eFully floating 2-piece rotors, 355 x 32mm\u003c\/li\u003e\n\u003cli\u003e48 directional ventilation vanes, up to 30% cooler than OEM\u003c\/li\u003e\n\u003cli\u003eHard anodised rotor hats resist heat, wear and discolouration\u003c\/li\u003e\n\u003cli\u003eCaliper finish: hard anodised or ENP\u003c\/li\u003e\n\u003cli\u003eCompatible with OEM ABS and master cylinder\u003c\/li\u003e\n\u003cli\u003eRetains the OEM handbrake \/ E-brake function\u003c\/li\u003e\n\u003cli\u003ePre-assembled rear axle kit – bolt-on installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKit Contents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2 x Paragon PA025 4-piston calipers\u003c\/li\u003e\n\u003cli\u003e2 x fully floating 2-piece rotors (355 x 32mm)\u003c\/li\u003e\n\u003cli\u003eBrake pads in the selected Paragon compound (P2, P3, R5 or R7)\u003c\/li\u003e\n\u003cli\u003e2 x caliper mounting brackets and all hardware\u003c\/li\u003e\n\u003cli\u003e2 x Goodridge stainless steel braided brake lines\u003c\/li\u003e\n\u003cli\u003eCaliper anti-rattle clips and installation manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Paragon","offers":[{"title":"Mil-Spec Hard Coat Anodizing \/ P2 Street Performance \/ 355x32mm - PA025 Caliper","offer_id":50358267085093,"sku":"PBK.04.166.355.320.TL.01.02.P2.R","price":3875.0,"currency_code":"AUD","in_stock":true},{"title":"ENP electroless nickel plated finish \/ P2 Street Performance \/ 355x32mm - PA025 Caliper","offer_id":50358267117861,"sku":"PBK.04.166.355.320.TL.01.02.P2.R.ENP","price":4175.0,"currency_code":"AUD","in_stock":true},{"title":"Mil-Spec Hard Coat Anodizing \/ P3 Road \u0026 Track \/ 355x32mm - PA025 Caliper","offer_id":50358267150629,"sku":"PBK.04.166.355.320.TL.01.02.P3.R","price":3875.0,"currency_code":"AUD","in_stock":true},{"title":"ENP electroless nickel plated finish \/ P3 Road \u0026 Track \/ 355x32mm - PA025 Caliper","offer_id":50358267183397,"sku":"PBK.04.166.355.320.TL.01.02.P3.R.ENP","price":4175.0,"currency_code":"AUD","in_stock":true},{"title":"Mil-Spec Hard Coat Anodizing \/ R5 Track \u0026 Competition \/ 355x32mm - PA025 Caliper","offer_id":50358267216165,"sku":"PBK.04.166.355.320.TL.01.02.R5.R","price":3980.0,"currency_code":"AUD","in_stock":true},{"title":"ENP electroless nickel plated finish \/ R5 Track \u0026 Competition \/ 355x32mm - PA025 Caliper","offer_id":50358267248933,"sku":"PBK.04.166.355.320.TL.01.02.R5.R.ENP","price":4280.0,"currency_code":"AUD","in_stock":true},{"title":"Mil-Spec Hard Coat Anodizing \/ R7 Track \u0026 Competition \/ 355x32mm - PA025 Caliper","offer_id":50358267281701,"sku":"PBK.04.166.355.320.TL.01.02.R7.R","price":4045.0,"currency_code":"AUD","in_stock":true},{"title":"ENP electroless nickel plated finish \/ R7 Track \u0026 Competition \/ 355x32mm - PA025 Caliper","offer_id":50358267314469,"sku":"PBK.04.166.355.320.TL.01.02.R7.R.ENP","price":4345.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/Paragon-Track-Performance-PA025-Rear-Brake-Kit-1__54181.jpg?v=1751337168"},{"product_id":"radium-engineering-fuel-rail-nissan-rb26dett-r32-r33-r34","title":"Radium Engineering Fuel Rail - Nissan Skyline GT-R (R32 \/ R33 \/ R34 RB26)","description":"\u003ch2\u003eRadium Engineering Fuel Rail - Nissan Skyline GT-R (R32 \/ R33 \/ R34 RB26)\u003c\/h2\u003e\u003cp\u003eThis Radium Engineering fuel rail fits the OEM RB26DETT intake manifold on the \u003cstrong\u003eNissan Skyline GT-R R32, R33 and R34\u003c\/strong\u003e (SKU 20-0217). A large 17.5mm internal bore supports high-power builds, and it is compatible with all fuels including ethanol and E85.\u003c\/p\u003e\u003cp\u003eIt is CNC machined from 6063 aluminium, black anodised and laser etched. Front, rear and centre ports are tapped 8AN ORB, with a separate 1\/8in NPT port for a fuel pressure sensor or gauge, and thermal insulating spacers and washers limit heat soak from the manifold and bolts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Designed for OEM or OEM-equivalent injectors; check aftermarket injector compatibility with your supplier. Injectors, fittings and gauge are sold separately, and reusing the OEM regulator requires FPR adapter 20-0303. Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect fit to the OEM RB26DETT intake manifold\u003c\/li\u003e\n\u003cli\u003e17.5mm internal bore\u003c\/li\u003e\n\u003cli\u003e8AN ORB front, rear and centre ports\u003c\/li\u003e\n\u003cli\u003e1\/8in NPT gauge\/sensor port\u003c\/li\u003e\n\u003cli\u003eCNC-machined 6063 aluminium, black anodised and laser etched\u003c\/li\u003e\n\u003cli\u003eThermal insulating spacers and washers included\u003c\/li\u003e\n\u003cli\u003eE85 compatible\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fuel-rail-plumbing-kit-nissan-rb26dett-r32-r33-r34\"\u003eRadium Engineering Fuel Rail Plumbing Kit - Nissan Skyline GT-R (R32 \/ R33 \/ R34 RB26)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fhst-nissan-r32-gtr\"\u003eRadium Engineering FHST - Nissan Skyline GT-R (R32)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fuel-pump-hanger-nissan-s14-s15-r33-r34\"\u003eRadium Engineering Fuel Pump Hanger - Nissan Silvia (S14 \/ S15) \/ Skyline (R33 \/ R34)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fuel-filter-kit-nissan-s-chassis-skyline\"\u003eRadium Engineering Fuel Filter Kit - Nissan Silvia \/ Skyline (All Models)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50375671775525,"sku":"20-0217","price":349.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/20-0217new.jpg?v=1744164684"},{"product_id":"radium-engineering-fuel-rail-plumbing-kit-nissan-rb26dett-r32-r33-r34","title":"Radium Engineering Fuel Rail Plumbing Kit - Nissan Skyline GT-R (R32 \/ R33 \/ R34 RB26)","description":"\u003ch2\u003eRadium Engineering Fuel Rail Plumbing Kit - Nissan Skyline GT-R (R32 \/ R33 \/ R34 RB26)\u003c\/h2\u003e\u003cp\u003eThis Radium Engineering plumbing kit (SKU 20-0217-PK) makes the Radium RB fuel rail a complete bolt-on installation on the \u003cstrong\u003eNissan Skyline GT-R (R32 \/ R33 \/ R34)\u003c\/strong\u003e with the RB26DETT. It connects the fuel filter to the rear of the rail and returns fuel through the OEM fuel pressure regulator.\u003c\/p\u003e\u003cp\u003eFuel hose runs from the fuel filter to the rear rail port via a 6AN hose end and adapter fitting. An FPR adapter mounts the OEM regulator to the front rail port, with hose to connect the regulator back to the hard line on the frame rail. Stainless EFI clamps secure all hose barbs, and plugs are supplied for the centre port and gauge port.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e A Radium RB fuel rail is required and sold separately (20-0217 for RB26DETT; the kit is also listed for the 20-0757 RB20DET rail). Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003eKit Contents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFuel hose, 6AN hose end and adapter fitting (fuel filter to rear rail port)\u003c\/li\u003e\n\u003cli\u003eFPR adapter to mount the OEM regulator on the front rail port\u003c\/li\u003e\n\u003cli\u003eFuel hose from the FPR to the frame rail hard line\u003c\/li\u003e\n\u003cli\u003eStainless steel EFI clamps\u003c\/li\u003e\n\u003cli\u003ePlugs for the centre port and gauge port\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fuel-rail-nissan-rb26dett-r32-r33-r34\"\u003eRadium Engineering Fuel Rail - Nissan Skyline GT-R (R32 \/ R33 \/ R34 RB26)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fuel-filter-kit-nissan-s-chassis-skyline\"\u003eRadium Engineering Fuel Filter Kit - Nissan Silvia \/ Skyline (All Models)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fhst-nissan-r32-gtr\"\u003eRadium Engineering FHST - Nissan Skyline GT-R (R32)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fuel-pump-hanger-nissan-s14-s15-r33-r34\"\u003eRadium Engineering Fuel Pump Hanger - Nissan Silvia (S14 \/ S15) \/ Skyline (R33 \/ R34)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50375671808293,"sku":"20-0217-PK","price":157.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/20-0217-PK.jpg?v=1744164601"},{"product_id":"radium-engineering-fuel-filter-kit-nissan-s-chassis-skyline","title":"Radium Engineering Fuel Filter Kit - Nissan Silvia \/ Skyline (All Models)","description":"\u003ch2\u003eRadium Engineering Fuel Filter Kit - Nissan Silvia \/ Skyline (All Models)\u003c\/h2\u003e\u003cp\u003eThis Radium Engineering fuel filter kit is a direct replacement for the factory Nissan filter plumbed between the fuel pump and fuel rail on \u003cstrong\u003eNissan Silvia \/ 180SX \/ 200SX\u003c\/strong\u003e and \u003cstrong\u003eSkyline R32 \/ R33 \/ R34\u003c\/strong\u003e models. Because it is less restrictive than the OEM filter, it lowers pre-filter pressure and pump current draw, which keeps fuel temperatures down and allows more fuel flow.\u003c\/p\u003e\u003ch3\u003eVideo\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eRADIUM In-Line Fuel Filter for S13 240sx | Hunny Sriracha\u003c\/strong\u003e\u003c\/p\u003e\u003cdiv style=\"position:relative;width:100%;max-width:720px;aspect-ratio:16\/9;margin:0 0 1em;\"\u003e\u003ciframe src=\"https:\/\/www.youtube-nocookie.com\/embed\/uJ-mWWueq3A\" title=\"RADIUM In-Line Fuel Filter for S13 240sx | Hunny Sriracha\" style=\"position:absolute;inset:0;width:100%;height:100%;border:0;\" loading=\"lazy\" allow=\"accelerometer; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003eThe 3-piece body is CNC machined from 6061 aluminium, Type-II anodised, with 10AN ORB female ports on both removable end caps and Viton O-ring seals for methanol, ethanol and E85. The large 4.2in x 1.75in element holds far more contaminants than the OEM filter before becoming restrictive. Choose the element with the variant selector: 10-micron cleanable stainless (SKU 20-0585-03) or 6-micron microglass (SKU 20-0585-05).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Installs in under an hour at the factory location with no cutting or drilling. An extra 90-degree PushLok hose end is included for aftermarket fuel rails with a 6AN male inlet. Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect replacement for the OEM Nissan fuel filter\u003c\/li\u003e\n\u003cli\u003eLess restrictive than OEM for lower pump load and more flow\u003c\/li\u003e\n\u003cli\u003eCNC-machined 6061 aluminium, Type-II anodised 3-piece body\u003c\/li\u003e\n\u003cli\u003e10AN ORB female ports on both end caps\u003c\/li\u003e\n\u003cli\u003e4.2in x 1.75in filter element\u003c\/li\u003e\n\u003cli\u003eStainless (10 micron) or microglass (6 micron) element options\u003c\/li\u003e\n\u003cli\u003eViton O-rings – compatible with methanol, ethanol and E85\u003c\/li\u003e\n\u003cli\u003eExtra 90-degree PushLok hose end included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fuel-pump-hanger-nissan-s14-s15-r33-r34\"\u003eRadium Engineering Fuel Pump Hanger - Nissan Silvia (S14 \/ S15) \/ Skyline (R33 \/ R34)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fuel-hanger-plumbing-kit-nissan-s14-s15-r33-r34\"\u003eRadium Engineering Fuel Hanger Plumbing Kit - Nissan Silvia (S14 \/ S15) \/ Skyline (R33 \/ R34)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-replacement-fuel-filter-element-universal\"\u003eRadium Engineering Replacement Fuel Filter Element - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fuel-brake-line-retainer-kit-nissan-s-chassis-skyline\"\u003eRadium Engineering Fuel \u0026amp; Brake Line Retainer Kit - Nissan Silvia \/ Skyline (All Models)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Stainless Filter (10 Micron)","offer_id":50375671873829,"sku":"20-0585-03","price":384.99,"currency_code":"AUD","in_stock":true},{"title":"Microglass Filter (6 Micron)","offer_id":50375671906597,"sku":"20-0585-05","price":349.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/20-0585-XX.jpg?v=1744164393"},{"product_id":"radium-engineering-swivel-banjo-press-in-fittings-nissan-valve-covers","title":"Radium Engineering Swivel Banjo Press-In Fittings - Nissan (Valve Covers)","description":"\u003ch2\u003eRadium Engineering Swivel Banjo Press-In Fittings - Nissan (Valve Covers)\u003c\/h2\u003e\u003cp\u003eRadium Engineering's swivel banjo press-in fittings replace the OEM valve cover barbs, vents or PCV valve on popular Nissan SR and RB engines with a low-profile AN or SAE connection, ready for catch can, AOS or PCV plumbing. They simply press in with no drilling or welding, and swivel on Viton O-rings for easy hose alignment.\u003c\/p\u003e\u003cp\u003eUse the variant selector to choose the fitting for your engine and port: 20-0808 10AN replaces the intake-side PCV valve on RB25DET and S14\/S15 SR20DET (and any Nissan engine using PCV grommet P\/N 11812-41B00); 20-0809 12AN replaces either RB26DETT valve cover fitting; 20-0811 is a double-ended 10AN banjo for the S13 SR20DET exhaust-side cover; 20-0812 10AN banjo suits the S14\/S15 SR20DET exhaust side; 20-0813 10AN banjo suits the front crankcase ports on RB20DET and all RB25DET covers (NEO and non-NEO); and 20-0739 is a double-ended 16mm SAE quick connect for RB26DETT covers, ideal for balancing the two covers and compatible with Radium SAE hose ends 14-0627 and 14-0628.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Fittings are sold individually – RB26DETT (20-0809, 20-0739) and RB20DET\/RB25DET (20-0813) covers need two to replace both sides. For the PCV valve on the side of the RB25DET intake cover use 20-0808. Confirm your engine uses grommet 11812-41B00 before ordering 20-0808. Lightly oil O-rings before fitting. Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDirect press-in replacement for OEM valve cover fittings\u003c\/li\u003e\n\u003cli\u003eLow-profile 10AN, 12AN or 16mm SAE connections\u003c\/li\u003e\n\u003cli\u003eSwivel action on Viton O-rings\u003c\/li\u003e\n\u003cli\u003eStainless steel and aluminium construction\u003c\/li\u003e\n\u003cli\u003eBlack anodised and laser engraved\u003c\/li\u003e\n\u003cli\u003eNo drilling, welding or modification required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fluid-lock-dual-catch-can-kit-nissan-s13-sr20det\"\u003eRadium Engineering Fluid Lock Dual Catch Can Kit - Nissan Silvia (S13 SR20DET)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fluid-lock-dual-catch-can-kit-nissan-s15-silvia-200sx\"\u003eRadium Engineering Fluid Lock Dual Catch Can Kit - Nissan Silvia (S15)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fluid-lock-dual-catch-can-kit-nissan-r32-skyline-gtr\"\u003eRadium Engineering Fluid Lock Dual Catch Can Kit - Nissan Skyline GT-R (R32)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-10an-male-press-in-valve-cover-fitting-nissan-silvia-240sx-s13-s14-intake-side\"\u003eRadium Engineering 10AN Male Press-In Valve Cover Fitting - Nissan Silvia\/240SX (S13\/S14) - Intake Side\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"10AN Male Press-Fit – RB25DET \/ SR20DET S14-S15 Intake","offer_id":50375672004901,"sku":"20-0808","price":104.99,"currency_code":"AUD","in_stock":true},{"title":"12AN Male Press-Fit – RB26DETT Intake\/Exhaust","offer_id":50375672037669,"sku":"20-0809","price":104.99,"currency_code":"AUD","in_stock":true},{"title":"10AN Male Press-Fit – SR20DET S13 Exhaust","offer_id":50375672070437,"sku":"20-0811","price":104.99,"currency_code":"AUD","in_stock":true},{"title":"10AN Male Press-Fit – SR20DET S14\/S15 Exhaust","offer_id":50375672103205,"sku":"20-0812","price":104.99,"currency_code":"AUD","in_stock":true},{"title":"10AN Male Press-Fit – RB20DET \/ RB25DET Intake\/Exhaust","offer_id":50375672135973,"sku":"20-0813","price":104.99,"currency_code":"AUD","in_stock":true},{"title":"SAE Male Double Banjo Press-Fit – RB26DETT Intake\/Exhaust","offer_id":50375672168741,"sku":"20-0739","price":104.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/20-0739_a_6a36c627-1d25-4a6a-a687-2c3d601cb310.jpg?v=1744163598"},{"product_id":"radium-engineering-fuel-brake-line-retainer-kit-nissan-s-chassis-skyline","title":"Radium Engineering Fuel \u0026 Brake Line Retainer Kit - Nissan Silvia \/ Skyline (All Models)","description":"\u003ch2\u003eRadium Engineering Fuel \u0026amp; Brake Line Retainer Kit - Nissan Silvia \/ Skyline (All Models)\u003c\/h2\u003e\u003cp\u003eThis Radium Engineering fuel and brake line retainer kit (SKU 20-0626) replaces the factory plastic clips that hold the OEM fuel and brake hard lines under Nissan Silvia, 180SX\/200SX\/240SX and Skyline chassis. It is designed for cars running larger aftermarket feed and return lines, such as Radium 8AN feed and 6AN return Fuel\/PCV hose.\u003c\/p\u003e\u003cp\u003eThe billet 6061 aluminium clamps are black anodised for corrosion resistance and hold the lines securely without damaging them, giving clean, rattle-free routing under the car. They fit to existing chassis mounting points with stainless hardware, so no drilling is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Fuel lines are not included. Line fitment depends on the outside diameter of the hose used (rubber, braided, PTFE, aluminium etc.); maximum hose OD is 0.69in (17.5mm). Some vehicles use only 7 of the 8 supplied retainers. On HICAS-equipped cars, pair with Radium's HICAS retainer kit so the HICAS lines are not left unsupported. Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplaces the OEM plastic fuel and brake line clips\u003c\/li\u003e\n\u003cli\u003eCNC-machined 6061 aluminium, black anodised\u003c\/li\u003e\n\u003cli\u003eSuits 6AN and 8AN Radium Fuel\/PCV hose\u003c\/li\u003e\n\u003cli\u003eMaximum hose OD 0.69in (17.5mm)\u003c\/li\u003e\n\u003cli\u003eUses factory mounting holes – no cutting or drilling\u003c\/li\u003e\n\u003cli\u003eStainless steel hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fuel-hanger-plumbing-kit-nissan-s14-s15-r33-r34\"\u003eRadium Engineering Fuel Hanger Plumbing Kit - Nissan Silvia (S14 \/ S15) \/ Skyline (R33 \/ R34)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fuel-pump-hanger-nissan-s14-s15-r33-r34\"\u003eRadium Engineering Fuel Pump Hanger - Nissan Silvia (S14 \/ S15) \/ Skyline (R33 \/ R34)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fuel-filter-kit-nissan-s-chassis-skyline\"\u003eRadium Engineering Fuel Filter Kit - Nissan Silvia \/ Skyline (All Models)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-hicas-line-retainer-kit-nissan\"\u003eRadium Engineering HICAS Line Retainer Kit - Nissan (All Models)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50375672594725,"sku":"20-0626","price":471.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/20-0626.jpg?v=1744162384"},{"product_id":"radium-engineering-hicas-line-retainer-kit-nissan","title":"Radium Engineering HICAS Line Retainer Kit - Nissan (All Models)","description":"\u003ch2\u003eRadium Engineering HICAS Line Retainer Kit - Nissan (All Models)\u003c\/h2\u003e\u003cp\u003eThe Radium Engineering HICAS Line Retainer Kit (SKU 20-0627) is for Nissan vehicles fitted with HICAS rear-wheel steering. On these cars the HICAS lines share the factory plastic retainers with the fuel and brake lines, so when those retainers are removed the HICAS lines are left hanging.\u003c\/p\u003e\u003cp\u003eThis kit replaces them with black anodised billet aluminium clamps and is designed to complement the Radium 20-0626 Fuel and Brake Line Retainer Kit. Because the two HICAS lines are already rigidly fixed to the chassis at the front and rear, the clamps simply hold the lines together and do not need to anchor to the body.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Suits HICAS-equipped vehicles only. Space all five clamps evenly along the HICAS lines when installing. Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003eKit Contents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e5 x black anodised 6061 aluminium clamps\u003c\/li\u003e\n\u003cli\u003e5 x stainless steel M6 x 1mm Allen head bolts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fuel-brake-line-retainer-kit-nissan-s-chassis-skyline\"\u003eRadium Engineering Fuel \u0026amp; Brake Line Retainer Kit - Nissan Silvia \/ Skyline (All Models)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50375672627493,"sku":"20-0627","price":87.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/20-0627.jpg?v=1744162293"},{"product_id":"radium-engineering-fhst-nissan-r32-gtr","title":"Radium Engineering FHST - Nissan Skyline GT-R (R32)","description":"\u003ch2\u003eRadium Engineering FHST - Nissan Skyline GT-R (R32)\u003c\/h2\u003e\u003cp\u003eThe Radium Engineering Fuel Hanger Surge Tank (FHST) builds a fully functional surge tank inside the OEM fuel tank of the \u003cstrong\u003eNissan Skyline GT-R R32\u003c\/strong\u003e, preventing the fuel starvation and lean running that slosh causes during hard driving. It runs 1, 2 or 3 high-pressure surge pumps plus a lift pump, enough for any power level, and drops in with no grinding, bending or modification.\u003c\/p\u003e\u003cp\u003eA lift pump in a stainless collector box with a one-way trap door, regulator return fuel and two 355LPH one-way fill valves keep the surge tank full, with excess fuel spilling back into the main tank. Choose the variant to suit your pumps: 20-0740-00 for the Walbro GSS342 or AEM 50-1200, 20-0742-00 for the Walbro F90000267\/274\/285, or 20-0741-00 for the TI Automotive E5LM.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Pumps are sold separately and a lift pump is required in all installations. Kits arrive partially assembled for final assembly during installation. Wiring for one surge pump is included; use Radium 17-0031 for each additional pump. A replacement OEM Nissan fuel level sensor is supplied. Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIn-tank surge tank for 1-3 surge pumps plus lift pump\u003c\/li\u003e\n\u003cli\u003eStainless steel lift pump collector with one-way trap door\u003c\/li\u003e\n\u003cli\u003eTwo 355LPH one-way fill valves\u003c\/li\u003e\n\u003cli\u003ePre-installed barbs for factory hoses, plus 8AN feed and 6AN return adapters\u003c\/li\u003e\n\u003cli\u003eBillet aluminium brake line retainers\u003c\/li\u003e\n\u003cli\u003eSock filter, mesh filter and Radium universal fuel filter\u003c\/li\u003e\n\u003cli\u003eSealed stainless anti-rotation studs and ETFE in-tank wiring\u003c\/li\u003e\n\u003cli\u003eAnodised aluminium; petrol, methanol and E85 compatible\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fuel-rail-nissan-rb26dett-r32-r33-r34\"\u003eRadium Engineering Fuel Rail - Nissan Skyline GT-R (R32 \/ R33 \/ R34 RB26)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fuel-rail-plumbing-kit-nissan-rb26dett-r32-r33-r34\"\u003eRadium Engineering Fuel Rail Plumbing Kit - Nissan Skyline GT-R (R32 \/ R33 \/ R34 RB26)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fuel-pump-access-covers-transparent\"\u003eRadium Engineering Fuel Pump Access Covers - Transparent\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fluid-lock-dual-catch-can-kit-nissan-r32-skyline-gtr\"\u003eRadium Engineering Fluid Lock Dual Catch Can Kit - Nissan Skyline GT-R (R32)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Walbro GSS342 or AEM 50-1200","offer_id":50375673643301,"sku":"20-0740-00","price":1380.99,"currency_code":"AUD","in_stock":true},{"title":"Walbro F90000267\/274\/285","offer_id":50375673676069,"sku":"20-0742-00","price":1432.99,"currency_code":"AUD","in_stock":true},{"title":"Ti Automotive E5LM","offer_id":50375673708837,"sku":"20-0741-00","price":1432.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/20-0742-00.jpg?v=1744158787"},{"product_id":"radium-engineering-fluid-lock-dual-catch-can-kit-nissan-r32-skyline-gtr","title":"Radium Engineering Fluid Lock Dual Catch Can Kit - Nissan Skyline GT-R (R32)","description":"\u003ch2\u003eRadium Engineering Fluid Lock Dual Catch Can Kit - Nissan Skyline GT-R (R32)\u003c\/h2\u003e\u003cp\u003eThis Radium Engineering Fluid Lock dual catch can kit (SKU 20-0590-FL) is designed around the RB26DETT in the R32 Skyline GT-R. It retains a true PCV system, with one catch can on the PCV valve side and another on the crankcase vent (CCV) side, and balances the intake and exhaust sides of the crankcase through a large 10AN crossover hose.\u003c\/p\u003e\u003cp\u003eThe PCV can mounts to threaded bosses on the front right-hand strut tower and runs between the valve cover crankcase vents and the PCV valve on the vacuum chamber. The CCV can mounts to the wiper motor on the left-hand side of the firewall and runs between the valve cover vents and the turbo inlet pipe, catching heavy blow-by at full throttle before it can coat the intake, intercooler and air filter pipe. Two double-ended press-in SAE fittings replace the valve cover crankcase vents for a light, serviceable installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This is a closed-loop system that does not vent to atmosphere, and no inline check valve is needed because the cans are pressure sealed. The kit suits the factory engine bay battery and ABS-equipped cars; if the OEM wastegate boost solenoid is retained, it must be relocated. Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSeparate PCV and CCV Fluid Lock catch cans for the RB26DETT\u003c\/li\u003e\n\u003cli\u003e10AN ORB ports with a 4AN ORB drain port on each can\u003c\/li\u003e\n\u003cli\u003e2-step baffling and O-ring sealed dipsticks\u003c\/li\u003e\n\u003cli\u003e5\/8in hose and 10AN fittings for both ends of each can\u003c\/li\u003e\n\u003cli\u003ePress-in SAE quick connect fittings for the valve cover vents\u003c\/li\u003e\n\u003cli\u003eNo cutting or drilling; stainless hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-catch-can-o-ring-service-kit-universal\"\u003eRadium Engineering Catch Can O-Ring Service Kit - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-catch-can-petcock-drain-kit-universal-4an-orb\"\u003eRadium Engineering Catch Can Petcock Drain Kit - Universal - 4AN ORB\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fuel-rail-nissan-rb26dett-r32-r33-r34\"\u003eRadium Engineering Fuel Rail - Nissan Skyline GT-R (R32 \/ R33 \/ R34 RB26)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fuel-rail-plumbing-kit-nissan-rb26dett-r32-r33-r34\"\u003eRadium Engineering Fuel Rail Plumbing Kit - Nissan Skyline GT-R (R32 \/ R33 \/ R34 RB26)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fhst-nissan-r32-gtr\"\u003eRadium Engineering FHST - Nissan Skyline GT-R (R32)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50375673774373,"sku":"20-0590-FL","price":1083.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/20-0590-FL.jpg?v=1744158386"},{"product_id":"radium-engineering-master-cylinder-brace-nissan-r32-skyline","title":"Radium Engineering Master Cylinder Brace - Nissan Skyline (R32)","description":"\u003ch2\u003eRadium Engineering Master Cylinder Brace - Nissan Skyline (R32)\u003c\/h2\u003e\u003cp\u003eThe Radium Engineering brake master cylinder brace (SKU 20-0586) for the \u003cstrong\u003eNissan Skyline (R32)\u003c\/strong\u003e stops the thin firewall flexing under hard braking, so more of your pedal effort becomes hydraulic line pressure. The result is a firmer pedal and a more responsive brake system.\u003c\/p\u003e\u003cp\u003eIt mounts to the strut tower on RHD cars and is a stiff, lightweight one-piece billet aluminium design, avoiding the secondary flex of multi-piece braces. Three mounting points on different planes add reinforcement, and the slim shape leaves room for aftermarket parts near the strut tower. A large-diameter aluminium-headed adjustment screw protects the master cylinder, and a stainless steel lock nut holds the set preload.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Designed for RHD vehicles and installs on the factory mounting threads with no cutting or drilling. Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined 6061 billet aluminium, one-piece design\u003c\/li\u003e\n\u003cli\u003eThree mounting points on different planes\u003c\/li\u003e\n\u003cli\u003eBlack anodised with laser-engraved Radium logo\u003c\/li\u003e\n\u003cli\u003eAluminium-headed preload adjustment bolt to protect the master cylinder\u003c\/li\u003e\n\u003cli\u003eStainless steel lock nut to hold preload\u003c\/li\u003e\n\u003cli\u003eIncludes M6 x 1mm stainless steel bolts and M12 x 1.25mm JIS flange nut\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fuel-brake-line-retainer-kit-nissan-s-chassis-skyline\"\u003eRadium Engineering Fuel \u0026amp; Brake Line Retainer Kit - Nissan Silvia \/ Skyline (All Models)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-hicas-line-retainer-kit-nissan\"\u003eRadium Engineering HICAS Line Retainer Kit - Nissan (All Models)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fhst-nissan-r32-gtr\"\u003eRadium Engineering FHST - Nissan Skyline GT-R (R32)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fluid-lock-dual-catch-can-kit-nissan-r32-skyline-gtr\"\u003eRadium Engineering Fluid Lock Dual Catch Can Kit - Nissan Skyline GT-R (R32)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50375673807141,"sku":"20-0586","price":174.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/20-0586.jpg?v=1744158141"},{"product_id":"fluidampr-crankshaft-damper-nissan-rb26dett-phase-2-r33-r34-gt-r","title":"Fluidampr Crankshaft Damper – Nissan RB26DETT Phase-2 (R33 \/ R34 GT-R)","description":"\u003cp\u003eThe \u003cstrong\u003eFluidampr Crankshaft Damper\u003c\/strong\u003e (Part #610911) is engineered specifically for the \u003cstrong\u003eNissan RB26DETT Phase-2 engine\u003c\/strong\u003e, found in the \u003cstrong\u003e1993–2002 BCNR33 and BNR34 Skyline GT-R\u003c\/strong\u003e. Built from high-strength steel and designed for \u003cstrong\u003einternally balanced\u003c\/strong\u003e engines, this damper offers unmatched vibration control and durability under high-performance conditions.\u003c\/p\u003e\n\u003cp\u003eUnlike traditional rubber dampers, Fluidampr uses a viscous silicone fluid that continuously adapts to engine harmonics. This maintenance-free design significantly reduces torsional vibration, improving crankshaft reliability, engine smoothness, and overall performance — particularly under high-RPM and high-load scenarios.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Specifications:\u003c\/strong\u003e\u003cbr\u003e– Engine Fitment: Nissan RB26DETT (Phase-2)\u003cbr\u003e– Vehicle Fitment: 1993–2002 Nissan Skyline GT-R (BCNR33, BNR34)\u003cbr\u003e– Material: Steel\u003cbr\u003e– Finish: Black Zinc\u003cbr\u003e– Balance: Internal\u003cbr\u003e– Outside Diameter: 6-1\/8\"\u003cbr\u003e– Length: 2.995\"\u003cbr\u003e– Bore Diameter: 1.1800\"\u003cbr\u003e– Degree Markings: Engraved (TDC, 6 marks, 5° increments)\u003cbr\u003e– Keyway: Yes\u003cbr\u003e– Weight: 10.9 lbs total \/ 7.3 lbs rotating\u003cbr\u003e– Safety Rating: SFI 18.1\u003cbr\u003e– Mounting Hardware: Not included\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eResources:\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"https:\/\/fluidampr.com\/wp-content\/uploads\/4NFA14_Standard-Damper-Install_11-24-1.pdf\" target=\"_blank\"\u003eInstallation Instructions (PDF)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/fluidampr.com\/wp-content\/uploads\/Fluidampr-pulley-bolt-torque.pdf\" target=\"_blank\"\u003eTorque Specifications (PDF)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003eThis damper is for internally balanced RB26DETT engines only. Always confirm engine balance type before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCollection:\u003c\/strong\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.chicaneaustralia.com.au\/collections\/fluidampr\"\u003eBrowse more Fluidampr products\u003c\/a\u003e\u003c\/p\u003e","brand":"Fluidampr","offers":[{"title":"Default Title","offer_id":50842231636261,"sku":"610911","price":930.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/image_f0b051f2-8272-463e-8971-74f63f63a1b0.jpg?v=1754001765"},{"product_id":"alcon-r35-brembo-big-brake-upgrade-conversion-kit-nissan-skyline-r32-r33","title":"Alcon Front Big Brake Kit - Nissan Skyline (R32 \/ R33) - R35 Brembo (380mm)","description":"\u003ch2\u003eAlcon Front Big Brake Kit - Nissan Skyline (R32 \/ R33) - R35 Brembo (380mm)\u003c\/h2\u003e\u003cp\u003eThis Alcon conversion kit lets you fit Nissan GT-R (R35) Brembo front calipers with 380mm rotors to the Nissan Skyline R32 and R33. It supplies the caliper adaptors, Alcon-spec rotor hats, high-tensile bolts and brake lines needed to line up the caliper and rotor and route the lines correctly, for factory-style fitment.\u003c\/p\u003e\u003ch3\u003eRotors to suit\u003c\/h3\u003e\u003cp\u003eRotors are not included. The kit is set up for a 380mm rotor: \u003cstrong\u003eParagon PRK.035.380.340.22375.05.01.F\u003c\/strong\u003e or \u003cstrong\u003eAlcon DKF2222X756C24\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBrake fluid:\u003c\/strong\u003e bleed the new system with \u003ca href=\"\/products\/alcon-pro-600-dot-4-high-performance-brake-fluid-500ml\"\u003eAlcon PRO-600\u003c\/a\u003e for road and track days, or \u003ca href=\"\/products\/alcon-pro-660-dot-4-high-performance-brake-fluid-500ml\"\u003ePRO-660\u003c\/a\u003e for racing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This is a fitting kit only: the R35 GT-R Brembo front calipers, rotors and pads are not included. Minor trimming of the front brake dust shields is needed. Kits are made to order. Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003eKit Contents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 x pair of front caliper dogbone adaptors\u003c\/li\u003e\n\u003cli\u003e2 x rotor hats (Alcon specification)\u003c\/li\u003e\n\u003cli\u003e1 x set of high-tensile mounting bolts\u003c\/li\u003e\n\u003cli\u003e1 x pair of brake lines\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed help choosing the right setup? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Alcon","offers":[{"title":"Default Title","offer_id":51381637742885,"sku":"ALC-R33-380MM","price":1999.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/ALC-R33-380mm.jpg?v=1760405058"},{"product_id":"alcon-r35-brembo-big-brake-upgrade-conversion-kit-for-nissan-skyline-r32-r33-390mm","title":"Alcon Front Big Brake Kit - Nissan Skyline (R32 \/ R33) - R35 Brembo (390mm)","description":"\u003ch2\u003eAlcon Front Big Brake Kit - Nissan Skyline (R32 \/ R33) - R35 Brembo (390mm)\u003c\/h2\u003e\u003cp\u003eThis Alcon conversion kit lets you fit Nissan GT-R (R35) Brembo front calipers with 390mm rotors to the Nissan Skyline R32 and R33. It supplies the caliper adaptors, Alcon-spec rotor hats, high-tensile bolts and brake lines needed to line up the caliper and rotor and route the lines correctly, for factory-style fitment.\u003c\/p\u003e\u003ch3\u003eRotors to suit\u003c\/h3\u003e\u003cp\u003eRotors are not included. The kit is set up for a 390mm rotor: \u003cstrong\u003eParagon PRK.035.390.328.23150.05.01.F\u003c\/strong\u003e or \u003cstrong\u003eAlcon DKF2222X758\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBrake fluid:\u003c\/strong\u003e bleed the new system with \u003ca href=\"\/products\/alcon-pro-600-dot-4-high-performance-brake-fluid-500ml\"\u003eAlcon PRO-600\u003c\/a\u003e for road and track days, or \u003ca href=\"\/products\/alcon-pro-660-dot-4-high-performance-brake-fluid-500ml\"\u003ePRO-660\u003c\/a\u003e for racing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This is a fitting kit only: the R35 GT-R Brembo front calipers, rotors and pads are not included. Minor trimming of the front brake dust shields is needed. Kits are made to order. Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003eKit Contents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 x pair of front caliper dogbone adaptors\u003c\/li\u003e\n\u003cli\u003e2 x rotor hats (Alcon specification)\u003c\/li\u003e\n\u003cli\u003e1 x set of high-tensile mounting bolts\u003c\/li\u003e\n\u003cli\u003e1 x pair of brake lines\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed help choosing the right setup? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Alcon","offers":[{"title":"Default Title","offer_id":51381667987749,"sku":"ALC-R33-390MM","price":1999.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/ALC-R33-380mm.jpg?v=1760405058"},{"product_id":"alcon-r35-brembo-rear-big-brake-upgrade-conversion-kit-for-nissan-skyline-r32-r33-380mm","title":"Alcon Rear Big Brake Kit - Nissan Skyline (R32 \/ R33) - R35 Brembo (380mm)","description":"\u003ch2\u003eAlcon Rear Big Brake Kit - Nissan Skyline (R32 \/ R33) - R35 Brembo (380mm)\u003c\/h2\u003e\u003cp\u003eThis Alcon conversion kit lets you fit Nissan GT-R (R35) Brembo rear calipers with 380mm rotors to the Nissan Skyline R32 and R33. It supplies the caliper adaptors, Alcon-spec rotor hats, high-tensile bolts and brake lines needed to line up the caliper and rotor and route the lines correctly, so the rear brakes can match an upgraded front end.\u003c\/p\u003e\u003ch3\u003eRotors to suit\u003c\/h3\u003e\u003cp\u003eRotors are not included. The kit is set up for a 380mm rotor: \u003cstrong\u003eParagon PRK.035.380.300.24700.04.01.R\u003c\/strong\u003e or \u003cstrong\u003eAlcon DKR2175X757\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBrake fluid:\u003c\/strong\u003e bleed the new system with \u003ca href=\"\/products\/alcon-pro-600-dot-4-high-performance-brake-fluid-500ml\"\u003eAlcon PRO-600\u003c\/a\u003e for road and track days, or \u003ca href=\"\/products\/alcon-pro-660-dot-4-high-performance-brake-fluid-500ml\"\u003ePRO-660\u003c\/a\u003e for racing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This is a fitting kit only: the R35 GT-R Brembo rear calipers, rotors and pads are not included. Minor trimming of the rear brake dust shields is needed. Kits are made to order. Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003eKit Contents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 x pair of rear caliper dogbone adaptors\u003c\/li\u003e\n\u003cli\u003e2 x rotor hats (Alcon specification)\u003c\/li\u003e\n\u003cli\u003e1 x set of high-tensile mounting bolts\u003c\/li\u003e\n\u003cli\u003e1 x pair of brake lines\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed help choosing the right setup? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Alcon","offers":[{"title":"Default Title","offer_id":51381818097957,"sku":"ALC-R33-34-380MMREAR","price":1999.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/ALC-R33-380mm.jpg?v=1760405058"},{"product_id":"koyorad-aluminium-racing-radiator-nissan-skyline-gts-t-gt-r-r32-cefiro-a31","title":"KOYORAD Aluminium Racing Radiator - Nissan Skyline GT-R\/GTS-T (R32) \/ Cefiro (A31) \/ Laurel (C33)","description":"\u003cp\u003eKoyorad aluminium racing radiators are a direct factory-replacement upgrade, built to handle increased cooling demands on modified and track-driven vehicles. The thicker 48mm Hyper Core and high-efficiency fin design provide improved coolant flow and a larger temperature drop across the surface compared to the standard radiator.\u003c\/p\u003e\n\u003cp\u003eKoyorad is Japan’s largest aftermarket radiator manufacturer, using aircraft-grade aluminium and precision Heli-arc welding for strength and durability. All radiators are built to OE-specific dimensions for an easy, direct fit.\u003c\/p\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e48mm “HH Series” Hyper Core\u003c\/li\u003e\n\u003cli\u003eDirect fit with OE mounting points\u003c\/li\u003e\n\u003cli\u003eNocolok-R brazed construction\u003c\/li\u003e\n\u003cli\u003ePrecise tube and fin alignment\u003c\/li\u003e\n\u003cli\u003eBillet aluminium filler neck\u003c\/li\u003e\n\u003cli\u003e1\/8” NPT female fitting for accessories\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eNissan Skyline R32 GT-R \/ GT-S (RB25 \/ RB26) – 1989–1993\u003c\/li\u003e\n\u003cli\u003eNissan Cefiro A31 (RB20) – 1988–1994\u003c\/li\u003e\n\u003cli\u003eNissan Laurel C33 (RB20) – 1989–1993\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Koyorad","offers":[{"title":"Default Title","offer_id":51667268436261,"sku":"HH020214","price":749.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/HH020214.webp?v=1764303861"},{"product_id":"ast-suspension-nissan-skyline-gtr-bnr32","title":"AST Suspension Coilovers – Nissan Skyline GT-R (BNR32)","description":"\u003ch2\u003eAST Suspension Coilovers – Nissan Skyline GT-R (BNR32)\u003c\/h2\u003e\u003cp\u003eUpgrade your Nissan Skyline GT-R's suspension with AST Suspension coilovers, engineered in the Netherlands and developed through decades of motorsport experience and OEM collaboration. AST coilovers are designed to deliver precise handling, adjustable damping control, and reliable performance for daily driving through to track use.\u003c\/p\u003e\u003cp\u003eThis listing covers the AST Suspension coilover options shown for the Nissan Skyline GT-R (BNR32) platform. Multiple configurations are available, ranging from street-focused setups to higher-performance applications. Use the comparison chart on this product page to select the specification best suited to your driving style and vehicle configuration.\u003c\/p\u003e\u003cp\u003eVehicle compatibility, spring rates, damping adjustability, and fitment notes are provided in the tabs above. Please ensure your vehicle's year, trim level, and suspension configuration are confirmed before ordering.\u003c\/p\u003e\u003cp\u003eNot sure which specification is right for your vehicle? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"AST Suspension","offers":[{"title":"5100 Competition – Inverted CO (Front and Rear Top Mounts)","offer_id":51912508145957,"sku":"ACC-N5001S","price":6970.0,"currency_code":"AUD","in_stock":true},{"title":"5200 – 2-Way Adjustable","offer_id":51912508178725,"sku":"RIV-N5001S","price":9905.0,"currency_code":"AUD","in_stock":true},{"title":"5300 – 3-Way Adjustable","offer_id":51912508211493,"sku":"RAC-N5001S","price":10475.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/Universal_Picture_Shown.png?v=1769049321"},{"product_id":"moton-suspension-coilovers-nissan-skyline-gtr-bnr32","title":"MOTON Suspension Coilovers – Nissan Skyline GT-R (BNR32)","description":"\u003ch2\u003eMOTON Suspension Coilovers – Nissan Skyline GT-R (BNR32)\u003c\/h2\u003e\n\n\u003cp\u003eUpgrade your Nissan Skyline GT-R BNR32's suspension with MOTON Suspension coilovers, engineered in the Netherlands and developed through decades of motorsport experience and OEM collaboration. MOTON coilovers are designed to deliver precise handling, adjustable damping control, and reliable performance for daily driving through to track use.\u003c\/p\u003e\n\n\u003c!-- read more --\u003e\n\n\u003cp\u003eThis listing covers the MOTON Suspension coilover options shown for the Nissan Skyline GT-R (BNR32) platform. Multiple configurations are available, ranging from street-focused setups to higher-performance applications. Use the comparison chart on this product page to select the specification best suited to your driving style and vehicle configuration.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eKey:\u003c\/strong\u003e NCO = Non Coilover | TCO = True Coilover\u003c\/p\u003e\n\n\u003cp\u003eVehicle compatibility, spring rates, damping adjustability, and fitment notes are provided in the tabs above. Please ensure your vehicle's year, trim level, and suspension configuration are confirmed before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure which specification is right for your vehicle? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"MOTON Suspension","offers":[{"title":"1 Way","offer_id":52000863355173,"sku":"M-502-127S","price":7895.0,"currency_code":"AUD","in_stock":true},{"title":"2 Way TCO","offer_id":52000863387941,"sku":"M-502-128S","price":10495.0,"currency_code":"AUD","in_stock":true},{"title":"3 Way TCO","offer_id":52000863420709,"sku":"M-502-129S","price":11955.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/Moton3-way_80e6ed39-b506-4a51-9b8b-1a736b91082e.webp?v=1771107029"},{"product_id":"dixcel-front-brake-pads-nissan-skyline-gt-r-r32-r33-r34","title":"DIXCEL Front Brake Pads – Nissan Skyline GT-R (R32 \/ R33 \/ R34)","description":"\u003ch2\u003eDixcel Front Brake Pads – Nissan Skyline GT-R (R32 \/ R33 \/ R34)\u003c\/h2\u003e\u003cp\u003eUpgrade your Nissan Skyline GT-R's front braking performance with Dixcel brake pads, engineered in Japan and developed through decades of OEM supply and motorsport experience. Dixcel pads are designed to deliver consistent braking performance, stable pedal feel, and reliable control for daily driving through to more spirited use.\u003c\/p\u003e\u003cp\u003eThis listing covers the Dixcel brake pad compounds shown for the Nissan Skyline GT-R (R32, R33, and R34) platforms. Multiple compound options are available, ranging from street-focused replacements to higher-performance applications. Use the comparison chart on this product page to select the compound best suited to your driving style and vehicle configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDixcel Part Number:\u003c\/strong\u003e 321399\u003c\/p\u003e\u003cp\u003eVehicle compatibility, OEM part numbers, WVA references, pad shape, and fitment notes are provided in the tabs above. Please ensure your vehicle's year, trim level, and brake configuration are confirmed before ordering.\u003c\/p\u003e\u003cp\u003eNot sure which compound is right for your vehicle? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Dixcel Brakes","offers":[{"title":"Daily \/ Street \/ EC Type","offer_id":52002021998885,"sku":"EC-321399","price":115.0,"currency_code":"AUD","in_stock":true},{"title":"Daily \/ Street \/ ES Type","offer_id":52002022031653,"sku":"ES-321399","price":145.0,"currency_code":"AUD","in_stock":true},{"title":"Daily \/ Street \/ M Type","offer_id":52002022064421,"sku":"M-321399","price":230.0,"currency_code":"AUD","in_stock":true},{"title":"Spirited \/ Track Day \/ S Type","offer_id":52002022097189,"sku":"S-321399","price":215.0,"currency_code":"AUD","in_stock":true},{"title":"Spirited \/ Track Day \/ Z Type","offer_id":52002022129957,"sku":"Z-321399","price":295.0,"currency_code":"AUD","in_stock":true},{"title":"Track \/ Competition \/ RE Type","offer_id":52002022162725,"sku":"RE-321399","price":485.0,"currency_code":"AUD","in_stock":true},{"title":"Track \/ Competition \/ Specom B","offer_id":52002022195493,"sku":"SB-321399","price":575.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/image_bc1906a0-9591-4d20-b4bd-9cd1e691933c.jpg?v=1774589396"},{"product_id":"dixcel-rear-brake-rotors-nissan-skyline-gt-r-r32-r33-r34-brembo","title":"DIXCEL Rear Brake Rotors – Nissan Skyline GT-R R32 \/ R33 \/ R34 (Brembo) – 300x22mm","description":"\u003ch2\u003eDixcel Rear Brake Rotors – Nissan Skyline GT-R R32 \/ R33 \/ R34 (Brembo) – 300x22mm\u003c\/h2\u003e\u003cp\u003eUpgrade your Nissan Skyline GT-R's rear braking performance with Dixcel brake rotors, engineered in Japan and developed through decades of OEM supply and motorsport experience. Dixcel rotors are designed to deliver consistent braking performance, stable pedal feel, and reliable control for daily driving through to more spirited use.\u003c\/p\u003e\u003cp\u003eThis listing covers the Dixcel brake rotor types shown for the Nissan Skyline GT-R R32, R33, and R34 platforms equipped with Brembo rear calipers and 300x22mm rotors. Multiple rotor types are available, ranging from street-focused replacements to higher-performance applications. Use the comparison chart on this product page to select the rotor type best suited to your driving style and vehicle configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDixcel Part Number:\u003c\/strong\u003e 3252006\u003c\/p\u003e\u003cp\u003eVehicle compatibility, OEM part numbers, rotor specifications, and fitment notes are provided in the tabs above. Please ensure your vehicle's year, trim level, and brake configuration are confirmed before ordering.\u003c\/p\u003e\u003cp\u003eNot sure which rotor type is right for your vehicle? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Dixcel Brakes","offers":[{"title":"Daily \/ Street \/ PD Type","offer_id":52045024592165,"sku":"PD3252006S","price":385.0,"currency_code":"AUD","in_stock":true},{"title":"Daily \/ Street \/ SD Type","offer_id":52045024624933,"sku":"SD3252006S","price":430.0,"currency_code":"AUD","in_stock":true},{"title":"Spirited \/ Track Day \/ FP Type","offer_id":52045024657701,"sku":"FP3252006S","price":460.0,"currency_code":"AUD","in_stock":true},{"title":"Spirited \/ Track Day \/ FS Type","offer_id":52045024690469,"sku":"FS3252006S","price":500.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/Dixcel_PD.jpg?v=1771365419"},{"product_id":"dixcel-front-brake-rotors-nissan-skyline-gt-r-r32-r33-r34-brembo","title":"DIXCEL Front Brake Rotors – Nissan Skyline GT-R R32 \/ R33 \/ R34 (Brembo) – 324x30mm","description":"\u003ch2\u003eDixcel Front Brake Rotors – Nissan Skyline GT-R R32 \/ R33 \/ R34 (Brembo) – 324x30mm\u003c\/h2\u003e\u003cp\u003eUpgrade your Nissan Skyline GT-R's front braking performance with Dixcel brake rotors, engineered in Japan and developed through decades of OEM supply and motorsport experience. Dixcel rotors are designed to deliver consistent braking performance, stable pedal feel, and reliable control for daily driving through to more spirited use.\u003c\/p\u003e\u003cp\u003eThis listing covers the Dixcel brake rotor types shown for the Nissan Skyline GT-R R32, R33, and R34 platforms equipped with Brembo front calipers and 324x30mm rotors. Multiple rotor types are available, ranging from street-focused replacements to higher-performance applications. Use the comparison chart on this product page to select the rotor type best suited to your driving style and vehicle configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDixcel Part Number:\u003c\/strong\u003e 3212003\u003c\/p\u003e\u003cp\u003eVehicle compatibility, OEM part numbers, rotor specifications, and fitment notes are provided in the tabs above. Please ensure your vehicle's year, trim level, and brake configuration are confirmed before ordering.\u003c\/p\u003e\u003cp\u003eNot sure which rotor type is right for your vehicle? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Dixcel Brakes","offers":[{"title":"Daily \/ Street \/ PD Type","offer_id":52045024723237,"sku":"PD3212003S","price":485.0,"currency_code":"AUD","in_stock":true},{"title":"Daily \/ Street \/ SD Type","offer_id":52045024756005,"sku":"SD3212003S","price":545.0,"currency_code":"AUD","in_stock":true},{"title":"Spirited \/ Track Day \/ FP Type","offer_id":52045024788773,"sku":"FP3212003S","price":570.0,"currency_code":"AUD","in_stock":true},{"title":"Spirited \/ Track Day \/ FS Type","offer_id":52045024821541,"sku":"FS3212003S","price":615.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/Dixcel_PD.jpg?v=1771365419"},{"product_id":"tomei-full-cast-exhaust-manifold-nissan-skyline-gtr","title":"Tomei Full Cast Exhaust Manifold - Nissan Skyline GT-R (BNR32\/BCNR33\/BNR34) - RB26DETT","description":"\u003ch2\u003eTomei Full Cast Exhaust Manifold - Nissan Skyline GT-R (BNR32\/BCNR33\/BNR34) - RB26DETT\u003c\/h2\u003e\n\u003cp\u003eThe Tomei Full Cast Exhaust Manifold for the RB26DETT is a one-piece lost-wax casting in SUS316 stainless steel. With no weld joints, it is built for durability under extreme conditions.\u003c\/p\u003e\n\u003cp\u003eSmooth merge collector angles reduce exhaust interference, and the high-flow flange design improves exhaust efficiency across the rev range.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eThis listing covers the Nissan Skyline GT-R BNR32, BCNR33 and BNR34 with the RB26DETT engine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Compatible with factory turbochargers, N1 turbochargers and bolt-on turbo upgrades.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eConstruction: one-piece lost-wax casting, no weld joints\u003c\/li\u003e\n\u003cli\u003eMaterial: SUS316 stainless steel\u003c\/li\u003e\n\u003cli\u003ePart number: 415003\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInstallation by a professional is recommended. Need help confirming fitment for your car? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Tomei","offers":[{"title":"Default Title","offer_id":52223081611557,"sku":"415003","price":1789.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/415003.jpg?v=1776288010"},{"product_id":"tomei-full-cast-turbo-outlet-pipe-rb26dett-nissan-skyline-gtr","title":"Tomei Full Cast Turbo Outlet Pipe - Nissan Skyline GT-R (BNR32\/BCNR33\/BNR34) - RB26DETT","description":"\u003ch2\u003eTomei Full Cast Turbo Outlet Pipe - Nissan Skyline GT-R (BNR32\/BCNR33\/BNR34) - RB26DETT\u003c\/h2\u003e\n\u003cp\u003eThe Tomei Full Cast Turbo Outlet Pipe for the RB26DETT is a one-piece lost-wax casting in SUS316 stainless steel with no weld joints, built for durability under extreme conditions.\u003c\/p\u003e\n\u003cp\u003eA Φ66 mm exit and increased internal volume reduce back pressure compared with the restrictive factory outlet. The profile is redesigned to clear the compressor housing and intake piping without restrictive concave sections, and the bolt flanges include spanner clearance for easier installation.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eThis listing covers the Nissan Skyline GT-R BNR32, BCNR33 and BNR34 with the RB26DETT engine.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eFront and rear turbo outlet pipes (pair)\u003c\/li\u003e\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eConstruction: one-piece lost-wax casting, no weld joints\u003c\/li\u003e\n\u003cli\u003eMaterial: SUS316 stainless steel\u003c\/li\u003e\n\u003cli\u003eExit diameter: Φ66 mm\u003c\/li\u003e\n\u003cli\u003ePart number: 421001\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInstallation by a professional is recommended. Need help confirming fitment for your car? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Tomei","offers":[{"title":"Default Title","offer_id":52223083512101,"sku":"421001","price":1299.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/421001.jpg?v=1776288060"},{"product_id":"tomei-ti-racing-titanium-front-pipe-nissan-skyline-gtr","title":"Tomei Ti RACING Titanium Front Pipe - Nissan Skyline GT-R (BNR32\/BCNR33\/BNR34) - RB26DETT","description":"\u003ch2\u003eTomei Ti RACING Titanium Front Pipe - Nissan Skyline GT-R (BNR32\/BCNR33\/BNR34) - RB26DETT\u003c\/h2\u003e\n\u003cp\u003eThe Tomei Ti RACING Titanium Front Pipe for the RB26DETT uses a near equal-length layout to optimise exhaust flow at high rpm, while keeping factory ground clearance – a common problem with aftermarket RB26 front pipes.\u003c\/p\u003e\n\u003cp\u003eTwin Φ70 mm inlets merge to a single Φ80 mm outlet. At 2.4 kg against 5.6 kg for the factory pipe, it saves 3.2 kg and gives the distinctive titanium exhaust note.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eThis listing covers the Nissan Skyline GT-R BNR32, BCNR33 and BNR34 with the RB26DETT engine.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaterial: titanium\u003c\/li\u003e\n\u003cli\u003eInlets: twin Φ70 mm\u003c\/li\u003e\n\u003cli\u003eOutlet: single Φ80 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 2.4 kg (factory 5.6 kg)\u003c\/li\u003e\n\u003cli\u003ePart number: 431006\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInstallation by a professional is recommended. Need help confirming fitment for your car? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Tomei","offers":[{"title":"Default Title","offer_id":52223085314341,"sku":"431006","price":1899.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/431006.jpg?v=1776288125"},{"product_id":"tomei-ti-sports-titanium-muffler-nissan-skyline-gtr-bnr32","title":"Tomei Ti SPORTS Titanium Muffler - Nissan Skyline GT-R (BNR32) - RB26DETT","description":"\u003ch2\u003eTomei Ti SPORTS Titanium Muffler - Nissan Skyline GT-R (BNR32) - RB26DETT\u003c\/h2\u003e\n\u003cp\u003eThe Tomei Ti SPORTS Titanium Muffler for the Skyline GT-R BNR32 brings the exhaust efficiency and light weight of Tomei's circuit exhausts to a system with controlled volume for road use.\u003c\/p\u003e\n\u003cp\u003eDeveloped from Tomei's competition exhaust programme and retuned for daily driving, it is a full-titanium system certified to the Japanese JASMA exhaust standard.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eThis listing covers the Nissan Skyline GT-R BNR32 with the RB26DETT engine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e JASMA certification applies to the Japanese market. Check your state's noise requirements before use on a registered road vehicle. For a circuit-focused system see the Tomei Ti RACING muffler.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaterial: titanium\u003c\/li\u003e\n\u003cli\u003eCertification: JASMA (Japan)\u003c\/li\u003e\n\u003cli\u003ePart number: 442001\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInstallation by a professional is recommended. Need help confirming fitment for your car? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Tomei","offers":[{"title":"Default Title","offer_id":52223086461221,"sku":"442001","price":3170.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/gtr_sp_back.jpg?v=1776288152"},{"product_id":"tomei-ti-racing-titanium-muffler-nissan-skyline-gtr-bnr32","title":"Tomei Ti RACING Titanium Muffler - Nissan Skyline GT-R (BNR32) - RB26DETT","description":"\u003ch2\u003eTomei Ti RACING Titanium Muffler - Nissan Skyline GT-R (BNR32) - RB26DETT\u003c\/h2\u003e\n\u003cp\u003eThe Tomei Ti RACING Titanium Muffler for the Skyline GT-R BNR32 uses a near-straight layout with a Φ89.1 mm main pipe for excellent exhaust efficiency, increasing power without sacrificing torque. It is designed with Japanese circuit sound limits in mind.\u003c\/p\u003e\n\u003cp\u003eThe system weighs 7.90 kg against 19.5 kg for the factory exhaust, and is finished with titanium blue tips bearing a laser-engraved Tomei logo.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eThis listing covers the Nissan Skyline GT-R BNR32 with the RB26DETT engine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Competition use only. This product is not intended for use on registered road vehicles – check your state's noise and emissions requirements before use on the road.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMaterial: titanium\u003c\/li\u003e\n\u003cli\u003eMain pipe diameter: Φ89.1 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 7.90 kg (factory 19.5 kg)\u003c\/li\u003e\n\u003cli\u003eTips: titanium blue, laser-engraved logo\u003c\/li\u003e\n\u003cli\u003ePart number: 441008\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eInstallation by a professional is recommended. Need help confirming fitment for your car? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Tomei","offers":[{"title":"Default Title","offer_id":52223086854437,"sku":"441008","price":2399.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/gtr_ra_back.jpg?v=1776288172"},{"product_id":"id-xds-injectors-nissan-skyline-gt-r-r32-r33-r34-toyota-supra-na-2jz-ge-a80-60mm-set-of-6","title":"Injector Dynamics XDS Fuel Injectors - Nissan Skyline GT-R (R32\/R33\/R34) \/ Toyota Supra NA 2JZ-GE (A80) \/ Toyota Supra Turbo 7M-GTE (A70) \/ more - 60mm Set of 6","description":"\u003ch2\u003eInjector Dynamics XDS Fuel Injectors - Nissan Skyline GT-R (R32\/R33\/R34) \/ Toyota Supra NA 2JZ-GE (A80) \/ Toyota Supra Turbo 7M-GTE (A70) \/ more - 60mm Set of 6\u003c\/h2\u003e\n\u003cp\u003eA flow-matched set of 6 Injector Dynamics XDS injectors for Skyline GT-R (11mm), Supra 7M-GTE, 2JZ-GE and 1JZ VVT-i. Each injector has a 60mm body and an 11mm top o-ring to suit the 11mm fuel rail bore. The injectors are built to Injector Dynamics' specification in partnership with Bosch Motorsport, use the USCAR electrical connector, and are offered in four flow rates so you can match the set to your power target and fuel.\u003c\/p\u003e\n\u003cp\u003eWhat sets Injector Dynamics apart is the data. Every set is matched on both flow rate and offset (dead time), not just static flow, so each cylinder gets the same amount of fuel at idle and cruise as well as at full load. Injector Dynamics also publishes full characterisation data for every injector: offset from 8 to 16 volts and flow slope from 40 to 100 psi of differential pressure. Your tuner enters the real numbers instead of guessing, which is what lets a large injector still idle, cruise and start cleanly.\u003c\/p\u003e\n\u003ch3\u003eChoosing a Flow Rate\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eNominal flow\u003c\/th\u003e\n\u003cth\u003eMax fuel pressure\u003c\/th\u003e\n\u003cth\u003eFuel compatibility\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eID1050x\u003c\/td\u003e\n\u003ctd\u003e1065cc\/min\u003c\/td\u003e\n\u003ctd\u003e10.0 bar (145 psi)\u003c\/td\u003e\n\u003ctd\u003eAll known fuels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eID1300x²\u003c\/td\u003e\n\u003ctd\u003e1335cc\/min\u003c\/td\u003e\n\u003ctd\u003e7.0 bar (101.5 psi)\u003c\/td\u003e\n\u003ctd\u003eAll known fuels (designed for alternative fuels)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eID1750x\u003c\/td\u003e\n\u003ctd\u003e1728cc\/min\u003c\/td\u003e\n\u003ctd\u003e7.0 bar (101.5 psi)\u003c\/td\u003e\n\u003ctd\u003eMethanol, ethanol, MTBE, nitromethane and all hydrocarbon fuels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eID2600-XDS\u003c\/td\u003e\n\u003ctd\u003e2600cc\/min\u003c\/td\u003e\n\u003ctd\u003e9.0 bar (130.5 psi), minimum 11 volts\u003c\/td\u003e\n\u003ctd\u003eMethanol, ethanol and all hydrocarbon fuels. Not compatible with ethers (MTBE, ETBE, TAME) or nitromethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eID1050x (ID1050-XDS)\u003c\/strong\u003e: 1065cc\/min at 3.0 bar (43.5 psi) on petrol at 52°C. The evolution of the ID1000. Corrosion-resistant internals, an improved internal flow path and a stronger magnetic circuit for stable operation up to 10 bar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eID1300x² (ID1300-XDS)\u003c\/strong\u003e: 1335cc\/min at 3.0 bar (43.5 psi) on iso-octane at 52°C. Designed with ethanol in mind, with all-stainless internals, but with a minimum fuel mass that still gives a good idle and cruise if you go back to petrol.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eID1750x (ID1750-XDS)\u003c\/strong\u003e: 1728cc\/min at 3.0 bar (43.5 psi) on E10 at 49°C. The successor to the ID1700. More flow with no increase in minimum fuel mass, better cylinder-to-cylinder balance at small pulse widths and improved pressure sensitivity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eID2600-XDS\u003c\/strong\u003e: 2600cc\/min at 3.0 bar (43.5 psi). The highest-flowing injector Bosch makes, 50% more than the ID1700x. Sets are Dual Slope Matched, which ID says cuts the average low pulse-width deviation from ±5.1% to ±1.4%.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNominal flow is measured at 3 bar (43.5 psi). Real flow goes up with fuel pressure: on a rising-rate system under boost the injector flows more than its rating, so check the maximum pressure above against your base pressure plus boost. If you are unsure which size suits your build, send us your engine, power goal, fuel and fuel pump and we will help.\u003c\/p\u003e\n\u003cp\u003eThe full list of cars this set suits is in the \u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e tab. Engine swaps, aftermarket fuel rails and modified engines can change what fits, so if your car is not listed or has been modified, contact us before ordering.\u003c\/p\u003e\n\u003ch3\u003eBefore You Order\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck your fuel rail bore.\u003c\/strong\u003e This set suits 11mm rails. Several engines (Skyline GT-R, Supra, Silvia, MR2, RX-7) came with either 11mm or 14mm rails, and aftermarket rails vary, so measure or check your rail before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA tune is required.\u003c\/strong\u003e Bigger injectors must be set up in the ECU using the Injector Dynamics data. ID publishes ready-to-use data for common platforms including MoTeC M1, Haltech, AEM, Holley, MegaSquirt, Cobb and EcuTek, plus OEM-style GM and Ford tables. Some factory ECUs cannot scale to very large injectors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector.\u003c\/strong\u003e The injectors use a USCAR connector. Older cars with a different plug need adaptors or harness changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel supply and filtration.\u003c\/strong\u003e Size the fuel pump to suit the injectors. Injector Dynamics follows the Bosch specification for injector protection (at least 87% capture at 5 microns and 100% at 35 microns), fitted after the pump and as close to the rail as practical. The \u003ca href=\"\/products\/injector-dynamics-idf750-fuel-filter-black\"\u003eID F750\u003c\/a\u003e and \u003ca href=\"\/products\/injector-dynamics-f1250-inline-filter-only\"\u003eID F1250\u003c\/a\u003e filters are built to that standard.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Injectors must be installed with a matching tune. Installation by a professional is recommended.\u003c\/p\u003e\n\u003ch3\u003eComplete Your Fuel System\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/injector-dynamics-idf750-fuel-filter-black\"\u003eInjector Dynamics F750 fuel filter\u003c\/a\u003e: meets the Bosch injector spec, with a Delta P indicator that shows when the element needs changing. Add the \u003ca href=\"\/products\/injector-dynamics-dual-fuel-sensor-id750\"\u003epressure \/ temperature sensor block\u003c\/a\u003e to log fuel pressure and temperature at the filter.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/injector-dynamics-f1250-inline-filter-only\"\u003eInjector Dynamics F1250 in-line filter\u003c\/a\u003e: 1,250 L\/h with only 1.1 psi drop for high-power builds, also available as a \u003ca href=\"\/products\/injector-dynamics-f1250-inline-filter-kit\"\u003ekit with mount\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/injector-dynamics-bpc100-e5lm-controller-kit\"\u003eInjector Dynamics FPS1100 pump system\u003c\/a\u003e (BPC100 controller + TI E5LM pump): holds up to 1,100 L\/h regardless of voltage or boost, enough for 2,000+ hp on ethanol from one pump.\u003c\/li\u003e\n\u003cli\u003eService parts: \u003ca href=\"\/products\/injector-dynamics-idf750-filter-element\"\u003eF750 element\u003c\/a\u003e, \u003ca href=\"\/products\/injector-dynamics-idf750-filter-oring\"\u003eF750 o-ring kit\u003c\/a\u003e and \u003ca href=\"\/products\/injector-dynamics-f1250-filter-element\"\u003eF1250 element\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"chicane-links\"\u003eShop more: \u003ca href=\"\/collections\/injector-dynamics\"\u003eInjector Dynamics Fuel Injectors\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Injector Dynamics","offers":[{"title":"ID1050x (1050cc)","offer_id":52630665199909,"sku":"1050.60.11.D.6","price":1334.95,"currency_code":"AUD","in_stock":true},{"title":"ID1300x² (1300cc)","offer_id":52630665232677,"sku":"1300.60.11.D.6","price":2294.95,"currency_code":"AUD","in_stock":true},{"title":"ID1750x (1750cc)","offer_id":52630665265445,"sku":"1750.60.11.D.6","price":2949.95,"currency_code":"AUD","in_stock":true},{"title":"ID2600-XDS (2600cc)","offer_id":52630665298213,"sku":"2600.60.11.D.6","price":3504.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/1300.60.11.d.6_7_1.jpg?v=1782184806"},{"product_id":"id-xds-injectors-nissan-skyline-gt-r-r32-r33-r34-60mm-set-of-6","title":"Injector Dynamics XDS Fuel Injectors - Nissan Skyline GT-R (R32\/R33\/R34) - 60mm Set of 6","description":"\u003ch2\u003eInjector Dynamics XDS Fuel Injectors - Nissan Skyline GT-R (R32\/R33\/R34) - 60mm Set of 6\u003c\/h2\u003e\n\u003cp\u003eA flow-matched set of 6 Injector Dynamics XDS injectors for the Skyline GT-R R32\/R33\/R34 with 14mm rails. Each injector has a 60mm body and a 14mm top o-ring to suit the 14mm fuel rail bore. The injectors are built to Injector Dynamics' specification in partnership with Bosch Motorsport, use the USCAR electrical connector, and are offered in four flow rates so you can match the set to your power target and fuel.\u003c\/p\u003e\n\u003cp\u003eWhat sets Injector Dynamics apart is the data. Every set is matched on both flow rate and offset (dead time), not just static flow, so each cylinder gets the same amount of fuel at idle and cruise as well as at full load. Injector Dynamics also publishes full characterisation data for every injector: offset from 8 to 16 volts and flow slope from 40 to 100 psi of differential pressure. Your tuner enters the real numbers instead of guessing, which is what lets a large injector still idle, cruise and start cleanly.\u003c\/p\u003e\n\u003ch3\u003eChoosing a Flow Rate\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eNominal flow\u003c\/th\u003e\n\u003cth\u003eMax fuel pressure\u003c\/th\u003e\n\u003cth\u003eFuel compatibility\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eID1050x\u003c\/td\u003e\n\u003ctd\u003e1065cc\/min\u003c\/td\u003e\n\u003ctd\u003e10.0 bar (145 psi)\u003c\/td\u003e\n\u003ctd\u003eAll known fuels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eID1300x²\u003c\/td\u003e\n\u003ctd\u003e1335cc\/min\u003c\/td\u003e\n\u003ctd\u003e7.0 bar (101.5 psi)\u003c\/td\u003e\n\u003ctd\u003eAll known fuels (designed for alternative fuels)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eID1750x\u003c\/td\u003e\n\u003ctd\u003e1728cc\/min\u003c\/td\u003e\n\u003ctd\u003e7.0 bar (101.5 psi)\u003c\/td\u003e\n\u003ctd\u003eMethanol, ethanol, MTBE, nitromethane and all hydrocarbon fuels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eID2600-XDS\u003c\/td\u003e\n\u003ctd\u003e2600cc\/min\u003c\/td\u003e\n\u003ctd\u003e9.0 bar (130.5 psi), minimum 11 volts\u003c\/td\u003e\n\u003ctd\u003eMethanol, ethanol and all hydrocarbon fuels. Not compatible with ethers (MTBE, ETBE, TAME) or nitromethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eID1050x (ID1050-XDS)\u003c\/strong\u003e: 1065cc\/min at 3.0 bar (43.5 psi) on petrol at 52°C. The evolution of the ID1000. Corrosion-resistant internals, an improved internal flow path and a stronger magnetic circuit for stable operation up to 10 bar.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eID1300x² (ID1300-XDS)\u003c\/strong\u003e: 1335cc\/min at 3.0 bar (43.5 psi) on iso-octane at 52°C. Designed with ethanol in mind, with all-stainless internals, but with a minimum fuel mass that still gives a good idle and cruise if you go back to petrol.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eID1750x (ID1750-XDS)\u003c\/strong\u003e: 1728cc\/min at 3.0 bar (43.5 psi) on E10 at 49°C. The successor to the ID1700. More flow with no increase in minimum fuel mass, better cylinder-to-cylinder balance at small pulse widths and improved pressure sensitivity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eID2600-XDS\u003c\/strong\u003e: 2600cc\/min at 3.0 bar (43.5 psi). The highest-flowing injector Bosch makes, 50% more than the ID1700x. Sets are Dual Slope Matched, which ID says cuts the average low pulse-width deviation from ±5.1% to ±1.4%.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNominal flow is measured at 3 bar (43.5 psi). Real flow goes up with fuel pressure: on a rising-rate system under boost the injector flows more than its rating, so check the maximum pressure above against your base pressure plus boost. If you are unsure which size suits your build, send us your engine, power goal, fuel and fuel pump and we will help.\u003c\/p\u003e\n\u003cp\u003eThe full list of cars this set suits is in the \u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e tab. Engine swaps, aftermarket fuel rails and modified engines can change what fits, so if your car is not listed or has been modified, contact us before ordering.\u003c\/p\u003e\n\u003ch3\u003eBefore You Order\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck your fuel rail bore.\u003c\/strong\u003e This set suits 14mm rails. Several engines (Skyline GT-R, Supra, Silvia, MR2, RX-7) came with either 11mm or 14mm rails, and aftermarket rails vary, so measure or check your rail before ordering.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA tune is required.\u003c\/strong\u003e Bigger injectors must be set up in the ECU using the Injector Dynamics data. ID publishes ready-to-use data for common platforms including MoTeC M1, Haltech, AEM, Holley, MegaSquirt, Cobb and EcuTek, plus OEM-style GM and Ford tables. Some factory ECUs cannot scale to very large injectors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector.\u003c\/strong\u003e The injectors use a USCAR connector. Older cars with a different plug need adaptors or harness changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel supply and filtration.\u003c\/strong\u003e Size the fuel pump to suit the injectors. Injector Dynamics follows the Bosch specification for injector protection (at least 87% capture at 5 microns and 100% at 35 microns), fitted after the pump and as close to the rail as practical. The \u003ca href=\"\/products\/injector-dynamics-idf750-fuel-filter-black\"\u003eID F750\u003c\/a\u003e and \u003ca href=\"\/products\/injector-dynamics-f1250-inline-filter-only\"\u003eID F1250\u003c\/a\u003e filters are built to that standard.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Injectors must be installed with a matching tune. Installation by a professional is recommended.\u003c\/p\u003e\n\u003ch3\u003eComplete Your Fuel System\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/injector-dynamics-idf750-fuel-filter-black\"\u003eInjector Dynamics F750 fuel filter\u003c\/a\u003e: meets the Bosch injector spec, with a Delta P indicator that shows when the element needs changing. Add the \u003ca href=\"\/products\/injector-dynamics-dual-fuel-sensor-id750\"\u003epressure \/ temperature sensor block\u003c\/a\u003e to log fuel pressure and temperature at the filter.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/injector-dynamics-f1250-inline-filter-only\"\u003eInjector Dynamics F1250 in-line filter\u003c\/a\u003e: 1,250 L\/h with only 1.1 psi drop for high-power builds, also available as a \u003ca href=\"\/products\/injector-dynamics-f1250-inline-filter-kit\"\u003ekit with mount\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/products\/injector-dynamics-bpc100-e5lm-controller-kit\"\u003eInjector Dynamics FPS1100 pump system\u003c\/a\u003e (BPC100 controller + TI E5LM pump): holds up to 1,100 L\/h regardless of voltage or boost, enough for 2,000+ hp on ethanol from one pump.\u003c\/li\u003e\n\u003cli\u003eService parts: \u003ca href=\"\/products\/injector-dynamics-idf750-filter-element\"\u003eF750 element\u003c\/a\u003e, \u003ca href=\"\/products\/injector-dynamics-idf750-filter-oring\"\u003eF750 o-ring kit\u003c\/a\u003e and \u003ca href=\"\/products\/injector-dynamics-f1250-filter-element\"\u003eF1250 element\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"chicane-links\"\u003eShop more: \u003ca href=\"\/collections\/injector-dynamics\"\u003eInjector Dynamics Fuel Injectors\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Injector Dynamics","offers":[{"title":"ID1050x (1050cc)","offer_id":52630665658661,"sku":"1050.60.14.D.6","price":1334.95,"currency_code":"AUD","in_stock":true},{"title":"ID1300x² (1300cc)","offer_id":52630665691429,"sku":"1300.60.14.D.6","price":2294.95,"currency_code":"AUD","in_stock":true},{"title":"ID1750x (1750cc)","offer_id":52630665724197,"sku":"1750.60.14.D.6","price":2949.95,"currency_code":"AUD","in_stock":true},{"title":"ID2600-XDS (2600cc)","offer_id":52630665756965,"sku":"2600.60.14.D.6","price":3504.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/1300.60.14.d.6_2-2_e1018bca-1f9a-4368-969d-f5d7f26f68fd.jpg?v=1782182804"},{"product_id":"alcon-rear-bolt-on-big-brake-kit-nissan-200sx-s14-s15-skyline-r32-r33-inc-gt-r","title":"Alcon Rear Big Brake Kit - Nissan Skyline (R32 \/ R33) Incl. GT-R \/ 200SX (S14 \/ S15)","description":"\u003ch2\u003eAlcon Rear Big Brake Kit - Nissan Skyline (R32 \/ R33) Incl. GT-R \/ 200SX (S14 \/ S15)\u003c\/h2\u003e\u003cp\u003eThis Alcon rear big brake kit is built for the Nissan Skyline R32 and R33 (including GT-R) and 200SX (S14 \/ S15). It pairs an Alcon 4-piston caliper with a 2-piece rotor on a vehicle-specific billet hat and bracket, giving the rear axle more thermal capacity and less unsprung weight, and it helps keep the brake balance right once the front brakes have been upgraded. It suits fast road cars, track days and motorsport.\u003c\/p\u003e\u003ch3\u003eCaliper\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\n\u003cstrong\u003eCAR49 \"TA4+\"\u003c\/strong\u003e: 4-piston caliper with high-temperature dust seals for road and track days. 343x28mm or 355x28mm rotors.\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThen pick your rotor size and brand. Alcon and Paragon rotors are offered on every size.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReplacement rotor rings:\u003c\/strong\u003e when the rotor rings wear out, use our \u003ca href=\"\/pages\/ring-finder\"\u003eRotor Ring Finder\u003c\/a\u003e to find the right replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBrake fluid:\u003c\/strong\u003e bleed the new system with \u003ca href=\"\/products\/alcon-pro-600-dot-4-high-performance-brake-fluid-500ml\"\u003eAlcon PRO-600\u003c\/a\u003e for road and track days, or \u003ca href=\"\/products\/alcon-pro-660-dot-4-high-performance-brake-fluid-500ml\"\u003ePRO-660\u003c\/a\u003e for racing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The included pads are basic street pads for road use only, so fit a track compound before track days. This is a rear kit, usually fitted alongside a front big brake kit. Kits are made to order. Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003eKit Contents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2 x Alcon 4-piston calipers\u003c\/li\u003e\n\u003cli\u003e2 x Alcon or Paragon 2-piece rotors (your choice)\u003c\/li\u003e\n\u003cli\u003e1 x axle set of basic street brake pads (road use only)\u003c\/li\u003e\n\u003cli\u003e2 x vehicle-specific billet hats and brackets\u003c\/li\u003e\n\u003cli\u003e1 x HEL or Goodridge braided brake line kit\u003c\/li\u003e\n\u003cli\u003e1 x high-tensile mounting hardware kit\u003c\/li\u003e\n\u003cli\u003e1 x installation guide\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed help choosing the right setup? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Alcon","offers":[{"title":"CAR49 \"TA4+\" \/ 343x28mm \/ Alcon","offer_id":53887217959205,"sku":"ALCON-R33R-TA4-343-28-AL","price":4490.0,"currency_code":"AUD","in_stock":true},{"title":"CAR49 \"TA4+\" \/ 343x28mm \/ Paragon","offer_id":53887217991973,"sku":"ALCON-R33R-TA4-343-28-PG","price":4490.0,"currency_code":"AUD","in_stock":true},{"title":"CAR49 \"TA4+\" \/ 355x28mm \/ Alcon","offer_id":53887218024741,"sku":"ALCON-R33R-TA4-355-28-AL","price":4490.0,"currency_code":"AUD","in_stock":true},{"title":"CAR49 \"TA4+\" \/ 355x28mm \/ Paragon","offer_id":53887218057509,"sku":"ALCON-R33R-TA4-355-28-PG","price":4490.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/Alcon_-_Banner_1.png?v=1780984110"},{"product_id":"turbosmart-genv-raceport-blow-off-valve-nissan-skyline-gt-r-r32-r33-r34","title":"Turbosmart Gen-V RacePort Blow Off Valve - Nissan Skyline GT-R (R32\/R33\/R34)","description":"\u003ch2\u003eTurbosmart Gen-V RacePort Blow Off Valve - Nissan Skyline GT-R (R32\/R33\/R34)\u003c\/h2\u003e\n\u003cp\u003eThis bolt-on GenV RacePort kit for the Nissan Skyline GT-R replaces the factory blow off valve plenum with a single 50mm RacePort, simplifying the system. The RacePort is a compact billet 6000 series aluminium diaphragm valve with a quick-release V-band collar, flowing over 330 CFM through its 2.0\" inlet.\u003c\/p\u003e\n\u003ch3\u003eVideo\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eTurbosmart - GenV Race Port Range\u003c\/strong\u003e\u003c\/p\u003e\u003cdiv style=\"position:relative;width:100%;max-width:720px;aspect-ratio:16\/9;margin:0 0 1em;\"\u003e\u003ciframe src=\"https:\/\/www.youtube-nocookie.com\/embed\/9rZ1S41bIlQ\" title=\"Turbosmart - GenV Race Port Range\" style=\"position:absolute;inset:0;width:100%;height:100%;border:0;\" loading=\"lazy\" allow=\"accelerometer; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\u003cp\u003e\u003cstrong\u003eWhat's in the Box? - RacePort 50mm BOV for Nissan Skyline GR-R RB26  R32, R33 \u0026amp; R34\u003c\/strong\u003e\u003c\/p\u003e\u003cdiv style=\"position:relative;width:100%;max-width:720px;aspect-ratio:16\/9;margin:0 0 1em;\"\u003e\u003ciframe src=\"https:\/\/www.youtube-nocookie.com\/embed\/RgvCQUxMjo0\" title=\"What's in the Box? - RacePort 50mm BOV for Nissan Skyline GR-R RB26  R32, R33 \u0026amp; R34\" style=\"position:absolute;inset:0;width:100%;height:100%;border:0;\" loading=\"lazy\" allow=\"accelerometer; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\u003cp\u003e\u003cstrong\u003eRaceport Features \u0026amp; Benefits\u003c\/strong\u003e\u003c\/p\u003e\u003cdiv style=\"position:relative;width:100%;max-width:720px;aspect-ratio:16\/9;margin:0 0 1em;\"\u003e\u003ciframe src=\"https:\/\/www.youtube-nocookie.com\/embed\/66nBtJ4rcDI\" title=\"Raceport Features \u0026amp; Benefits\" style=\"position:absolute;inset:0;width:100%;height:100%;border:0;\" loading=\"lazy\" allow=\"accelerometer; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e A 50mm blanking plug is supplied. A valve position sensor option is available separately. Installation by a professional is recommended.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGenV RacePort 50mm blow off valve\u003c\/li\u003e\n\u003cli\u003e1\/8\" NPT vacuum fittings\u003c\/li\u003e\n\u003cli\u003e50mm blanking plug\u003c\/li\u003e\n\u003cli\u003eBlue spring, -18 inHg (installed)\u003c\/li\u003e\n\u003cli\u003eTurbosmart decal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/turbosmart-iwg75-wastegate-actuator-pair-nissan-skyline-gt-r-r32-r33-r34-upgrade-turbos\"\u003eTurbosmart IWG75 Wastegate Actuator Pair - Nissan Skyline GT-R (R32\/R33\/R34) Upgrade Turbos\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/turbosmart-billet-oil-cap-m32x3-5-nissan-skyline-r31-r32-r33-r34-200sx-s14-s15-180sx\"\u003eTurbosmart Billet Oil Cap M32x3.5 - Nissan Skyline (R31\/R32\/R33\/R34) \/ 200SX (S14\/S15) \/ 180SX\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/turbosmart-genv-raceport-bov-spring-kit\"\u003eTurbosmart Gen-V BOV Spring Kit - Suits Gen-V RacePort\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/turbosmart-genv-raceport-bov-piston-assembly\"\u003eTurbosmart Gen-V BOV Piston Assembly - Suits Gen-V RacePort\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":53918550229285,"sku":"TS-0204-1162","price":475.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/media_51fefb42-e779-43c7-aed3-8b820ab82059.jpg?v=1790655162"},{"product_id":"turbosmart-bov5-dual-port-blow-off-valve-nissan-skyline-gt-r-r32-r33-r34-gts-t-r33-r34","title":"Turbosmart BOV5 Dual Port Blow Off Valve - Nissan Skyline GT-R (R32\/R33\/R34) \/ GTS-T (R33\/R34) \/ Stagea \/ GT-R (R35)","description":"\u003ch2\u003eTurbosmart BOV5 Dual Port Blow Off Valve - Nissan Skyline GT-R (R32\/R33\/R34) \/ GTS-T (R33\/R34) \/ Stagea \/ GT-R (R35)\u003c\/h2\u003e\n\u003cp\u003eThe Turbosmart Dual Port for Nissan is a direct-fit BOV5 valve that is easy to install and set up. The Turbosmart BOV5 is a 38mm positive-seal piston valve built on Turbosmart's Boost-Balance design, so the more boost it sees the better it seals. It is machined from billet aluminium and hand assembled with a precision-matched piston, with every valve tested before dispatch. Its sequential ports keep it quiet on mild boost and deliver full venting performance at full boost.\u003c\/p\u003e\n\u003ch3\u003eVideo\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eNew Turbosmart Dual Port\u003c\/strong\u003e\u003c\/p\u003e\u003cdiv style=\"position:relative;width:100%;max-width:720px;aspect-ratio:16\/9;margin:0 0 1em;\"\u003e\u003ciframe src=\"https:\/\/www.youtube-nocookie.com\/embed\/9w6XkYv8pKs\" title=\"New Turbosmart Dual Port\" style=\"position:absolute;inset:0;width:100%;height:100%;border:0;\" loading=\"lazy\" allow=\"accelerometer; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\u003cp\u003e\u003cstrong\u003eTurbosmart - BOV5 RANGE INCLUDING VEE PORT PRO \u0026amp; SMART PORT\u003c\/strong\u003e\u003c\/p\u003e\u003cdiv style=\"position:relative;width:100%;max-width:720px;aspect-ratio:16\/9;margin:0 0 1em;\"\u003e\u003ciframe src=\"https:\/\/www.youtube-nocookie.com\/embed\/gIbry2AbAKc\" title=\"Turbosmart - BOV5 RANGE INCLUDING VEE PORT PRO \u0026amp; SMART PORT\" style=\"position:absolute;inset:0;width:100%;height:100%;border:0;\" loading=\"lazy\" allow=\"accelerometer; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Twin-turbo RB26DETT engines (Skyline GT-R R32\/R33\/R34 and Stagea 260RS) require two valves. The R35 GT-R requires this valve plus the TS-0205-1028 right-hand side valve. A blanking plug is supplied to block off the port if required. Installation by a professional is recommended.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBOV5 Dual Port valve\u003c\/li\u003e\n\u003cli\u003eBlanking plug\u003c\/li\u003e\n\u003cli\u003eYellow spring, -22 to -20 inHg (installed)\u003c\/li\u003e\n\u003cli\u003eGasket\u003c\/li\u003e\n\u003cli\u003eTurbosmart sticker\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/turbosmart-bov-flange-adapter-kit-nissan-skyline-gt-r-r32-r33-r34-gts-t-r32-r33-r34-stagea\"\u003eTurbosmart BOV Flange Adapter Kit - Nissan Skyline GT-R (R32\/R33\/R34) \/ GTS-T (R32\/R33\/R34) \/ Stagea \/ GT-R (R35)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/turbosmart-iwg75-wastegate-actuator-pair-nissan-skyline-gt-r-r32-r33-r34-upgrade-turbos\"\u003eTurbosmart IWG75 Wastegate Actuator Pair - Nissan Skyline GT-R (R32\/R33\/R34) Upgrade Turbos\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/turbosmart-billet-oil-cap-m32x3-5-nissan-skyline-r31-r32-r33-r34-200sx-s14-s15-180sx\"\u003eTurbosmart Billet Oil Cap M32x3.5 - Nissan Skyline (R31\/R32\/R33\/R34) \/ 200SX (S14\/S15) \/ 180SX\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/turbosmart-type-5-bov-replacement-spring\"\u003eTurbosmart BOV Replacement Spring - Suits Type 5 BOV\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/turbosmart-bov-o-ring-kit\"\u003eTurbosmart BOV O-Ring Kit - Suits Turbosmart Blow Off Valves\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":53918599741733,"sku":"TS-0205-1026","price":526.89,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/media_b0956efc-c51c-4991-b814-4e5e36657a35.jpg?v=1790655338"},{"product_id":"turbosmart-bov-flange-adapter-kit-nissan-skyline-gt-r-r32-r33-r34-gts-t-r32-r33-r34-stagea","title":"Turbosmart BOV Flange Adapter Kit - Nissan Skyline GT-R (R32\/R33\/R34) \/ GTS-T (R32\/R33\/R34) \/ Stagea \/ GT-R (R35)","description":"\u003ch2\u003eTurbosmart BOV Flange Adapter Kit - Nissan Skyline GT-R (R32\/R33\/R34) \/ GTS-T (R32\/R33\/R34) \/ Stagea \/ GT-R (R35)\u003c\/h2\u003e\n\u003cp\u003eThis kit lets a Turbosmart universal Plumb Back, Dual Port or Supersonic blow off valve be fitted to Nissan Skyline GT-R and GTS-T, Stagea and R35 GT-R models using Turbosmart's quick-change V-band.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Nissan GT-R models (R32\/R33\/R34\/R35) require two kits. Supplied with a gasket. The blow off valve is sold separately. Installation by a professional is recommended.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFlange adapter\u003c\/li\u003e\n\u003cli\u003eGasket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/turbosmart-bov5-dual-port-blow-off-valve-nissan-skyline-gt-r-r32-r33-r34-gts-t-r33-r34\"\u003eTurbosmart BOV5 Dual Port Blow Off Valve - Nissan Skyline GT-R (R32\/R33\/R34) \/ GTS-T (R33\/R34) \/ Stagea \/ GT-R (R35)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/turbosmart-iwg75-wastegate-actuator-pair-nissan-skyline-gt-r-r32-r33-r34-upgrade-turbos\"\u003eTurbosmart IWG75 Wastegate Actuator Pair - Nissan Skyline GT-R (R32\/R33\/R34) Upgrade Turbos\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/turbosmart-billet-oil-cap-m32x3-5-nissan-skyline-r31-r32-r33-r34-200sx-s14-s15-180sx\"\u003eTurbosmart Billet Oil Cap M32x3.5 - Nissan Skyline (R31\/R32\/R33\/R34) \/ 200SX (S14\/S15) \/ 180SX\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/turbosmart-bov5-dual-port-blow-off-valve-right-hand-side-nissan-gt-r-r35\"\u003eTurbosmart BOV5 Dual Port Blow Off Valve - Nissan GT-R (R35) - Right Hand Side\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":53918611341605,"sku":"TS-0205-2057","price":142.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/media_bb9869b4-6d15-4fc4-b5bf-241c15eac800.jpg?v=1790655460"},{"product_id":"turbosmart-bov-nissan-flange-gasket-nissan-skyline-gt-r-gts-t-gt-r-r35","title":"Turbosmart BOV Nissan Flange Gasket - Nissan Skyline GT-R \/ GTS-T \/ GT-R (R35)","description":"\u003ch2\u003eTurbosmart BOV Nissan Flange Gasket - Nissan Skyline GT-R \/ GTS-T \/ GT-R (R35)\u003c\/h2\u003e\n\u003cp\u003eA replacement Nissan BOV flange gasket that seals Turbosmart Nissan-flange blow off valves and adapters to the vehicle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Replacement gasket for the TS-0205-2057 flange adapter kit, TS-0205-1026 \/ TS-0205-1027 Nissan and R35 Dual Port valves and TS-0203-1226 Nissan Kompact valve. Installation by a professional is recommended.\u003c\/p\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/turbosmart-bov5-dual-port-blow-off-valve-nissan-skyline-gt-r-r32-r33-r34-gts-t-r33-r34\"\u003eTurbosmart BOV5 Dual Port Blow Off Valve - Nissan Skyline GT-R (R32\/R33\/R34) \/ GTS-T (R33\/R34) \/ Stagea \/ GT-R (R35)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/turbosmart-bov-flange-adapter-kit-nissan-skyline-gt-r-r32-r33-r34-gts-t-r32-r33-r34-stagea\"\u003eTurbosmart BOV Flange Adapter Kit - Nissan Skyline GT-R (R32\/R33\/R34) \/ GTS-T (R32\/R33\/R34) \/ Stagea \/ GT-R (R35)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/turbosmart-bov5-dual-port-blow-off-valve-right-hand-side-nissan-gt-r-r35\"\u003eTurbosmart BOV5 Dual Port Blow Off Valve - Nissan GT-R (R35) - Right Hand Side\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":53918617305381,"sku":"TS-0205-3109","price":12.09,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/media_9ff0ba8a-92c7-4dcf-a78d-2d7bc28dec68.jpg?v=1790655528"},{"product_id":"turbosmart-kompact-smartport-dual-port-blow-off-valve-kit-nissan-skyline-gt-r-r32-r33-r34","title":"Turbosmart Kompact SmartPort Blow Off Valve Kit - Nissan Skyline GT-R (R32\/R33\/R34) - Dual Port","description":"\u003ch2\u003eTurbosmart Kompact SmartPort Blow Off Valve Kit - Nissan Skyline GT-R (R32\/R33\/R34) - Dual Port\u003c\/h2\u003e\n\u003cp\u003eThe Turbosmart Kompact Dual Port set for the Skyline GT-R improves boost response and eliminates compressor surge, helping the efficiency and life of the factory twin turbos. SmartPort technology keeps the factory ECU and air flow meter happy, and each valve is machined from billet aluminium with a black anodised finish.\u003c\/p\u003e\n\u003ch3\u003eVideo\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eFeatures \u0026amp; Benefits - BOV Kompact Range\u003c\/strong\u003e\u003c\/p\u003e\u003cdiv style=\"position:relative;width:100%;max-width:720px;aspect-ratio:16\/9;margin:0 0 1em;\"\u003e\u003ciframe src=\"https:\/\/www.youtube-nocookie.com\/embed\/-IIQx8X6014\" title=\"Features \u0026amp; Benefits - BOV Kompact Range\" style=\"position:absolute;inset:0;width:100%;height:100%;border:0;\" loading=\"lazy\" allow=\"accelerometer; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The 50-50 vent and recirculate balance gives quiet operation at low boost and blow off valve sound under load. Unscrew the trumpet and fit the supplied blanking plug to run as a full recirculating valve. Installation by a professional is recommended.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 x Kompact SmartPort Dual Port valves\u003c\/li\u003e\n\u003cli\u003e2 x port blanking plugs\u003c\/li\u003e\n\u003cli\u003e2 x clamps\u003c\/li\u003e\n\u003cli\u003e2 x gaskets\u003c\/li\u003e\n\u003cli\u003eTurbosmart decal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/turbosmart-iwg75-wastegate-actuator-pair-nissan-skyline-gt-r-r32-r33-r34-upgrade-turbos\"\u003eTurbosmart IWG75 Wastegate Actuator Pair - Nissan Skyline GT-R (R32\/R33\/R34) Upgrade Turbos\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/turbosmart-billet-oil-cap-m32x3-5-nissan-skyline-r31-r32-r33-r34-200sx-s14-s15-180sx\"\u003eTurbosmart Billet Oil Cap M32x3.5 - Nissan Skyline (R31\/R32\/R33\/R34) \/ 200SX (S14\/S15) \/ 180SX\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/turbosmart-fpr-fuel-rail-adaptor-subaru-wrx-gc8-nissan-skyline-r32-r33-r34-200sx-s14-s15\"\u003eTurbosmart FPR Fuel Rail Adaptor - Subaru WRX (GC8) \/ Nissan Skyline (R32\/R33\/R34) \/ 200SX (S14\/S15) \/ Mazda RX-7 (FD3S)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/turbosmart-kompact-dual-port-plumb-back-bov-o-ring-kit\"\u003eTurbosmart BOV O-Ring Kit - Suits Kompact Dual Port \/ Plumb Back\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"Default Title","offer_id":53918647583013,"sku":"TS-0203-1072","price":646.79,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/media_a29ec844-613a-4d9c-9d96-a10f3a765ca7.jpg?v=1790655832"},{"product_id":"turbosmart-iwg75-wastegate-actuator-pair-nissan-skyline-gt-r-r32-r33-r34-upgrade-turbos","title":"Turbosmart IWG75 Wastegate Actuator Pair - Nissan Skyline GT-R (R32\/R33\/R34) Upgrade Turbos","description":"\u003ch2\u003eTurbosmart IWG75 Wastegate Actuator Pair - Nissan Skyline GT-R (R32\/R33\/R34) Upgrade Turbos\u003c\/h2\u003e\n\u003cp\u003eThis Turbosmart IWG75 pair is designed for aftermarket bolt-on Garrett and HKS turbochargers that use the factory turbo positions on the Nissan Skyline GT-R R32, R33 and R34. The IWG75 brings the large diaphragm working area of Turbosmart's external wastegates to the internal wastegate actuator, for greater mechanical advantage, a broader boost curve and more sensitive control.\u003c\/p\u003e\n\u003ch3\u003eVideo\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIWG75 Wastegate Actuator Series\u003c\/strong\u003e\u003c\/p\u003e\u003cdiv style=\"position:relative;width:100%;max-width:720px;aspect-ratio:16\/9;margin:0 0 1em;\"\u003e\u003ciframe src=\"https:\/\/www.youtube-nocookie.com\/embed\/A1TvzCz-PDI\" title=\"IWG75 Wastegate Actuator Series\" style=\"position:absolute;inset:0;width:100%;height:100%;border:0;\" loading=\"lazy\" allow=\"accelerometer; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\u003cp\u003e\u003cstrong\u003eWhat's in the Box? - IWG75 Bolt-On Wastegate Actuator Set to suit Nissan Skyline GT-R R32, R33 \u0026amp; R34\u003c\/strong\u003e\u003c\/p\u003e\u003cdiv style=\"position:relative;width:100%;max-width:720px;aspect-ratio:16\/9;margin:0 0 1em;\"\u003e\u003ciframe src=\"https:\/\/www.youtube-nocookie.com\/embed\/Y0cqWbpwO2Y\" title=\"What's in the Box? - IWG75 Bolt-On Wastegate Actuator Set to suit Nissan Skyline GT-R R32, R33 \u0026amp; R34\" style=\"position:absolute;inset:0;width:100%;height:100%;border:0;\" loading=\"lazy\" allow=\"accelerometer; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Not suitable for the standard factory ceramic turbochargers - suits bolt-on Garrett and HKS upgrade turbos only. Installation by a professional is recommended.\u003c\/p\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 x IWG75 upgrade actuators\u003c\/li\u003e\n\u003cli\u003eVehicle-specific brackets\u003c\/li\u003e\n\u003cli\u003eSprings pre-fitted to the listed pressure\u003c\/li\u003e\n\u003cli\u003eFasteners and swivel hose barb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/turbosmart-kompact-smartport-dual-port-blow-off-valve-kit-nissan-skyline-gt-r-r32-r33-r34\"\u003eTurbosmart Kompact SmartPort Blow Off Valve Kit - Nissan Skyline GT-R (R32\/R33\/R34) - Dual Port\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/turbosmart-billet-oil-cap-m32x3-5-nissan-skyline-r31-r32-r33-r34-200sx-s14-s15-180sx\"\u003eTurbosmart Billet Oil Cap M32x3.5 - Nissan Skyline (R31\/R32\/R33\/R34) \/ 200SX (S14\/S15) \/ 180SX\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/turbosmart-fpr-fuel-rail-adaptor-subaru-wrx-gc8-nissan-skyline-r32-r33-r34-200sx-s14-s15\"\u003eTurbosmart FPR Fuel Rail Adaptor - Subaru WRX (GC8) \/ Nissan Skyline (R32\/R33\/R34) \/ 200SX (S14\/S15) \/ Mazda RX-7 (FD3S)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/turbosmart-iwg75-diaphragm-replacement-single-port\"\u003eTurbosmart IWG75 Diaphragm Replacement - Single Port\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/turbosmart-gen4-wg38-40-45-50l-and-iwg75-replacement-spring\"\u003eTurbosmart Gen4 Replacement Spring - Suits Gen4 WG38 \/ WG40 \/ WG45 \/ WG50L and IWG75\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Turbosmart","offers":[{"title":"7psi","offer_id":53918838227237,"sku":"TS-0615-6072","price":577.49,"currency_code":"AUD","in_stock":true},{"title":"14psi","offer_id":53918838260005,"sku":"TS-0615-6142","price":577.49,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/media_f51ca7b0-862f-47e7-9b29-fe3a78975a2b.jpg?v=1790657607"},{"product_id":"arp-custom-age-625-plus-head-stud-kit-nissan-rb26dett-skyline-gt-r-r32-r33-r34","title":"ARP Custom Age 625+ Head Stud Kit - Nissan RB26DETT - Skyline GT-R (R32 \/ R33 \/ R34)","description":"\u003ch2\u003eARP Custom Age 625+ Head Stud Kit - Nissan RB26DETT - Skyline GT-R (R32 \/ R33 \/ R34)\u003c\/h2\u003e\n\u003cp\u003eThis ARP head stud kit suits the RB26DETT engine in the Nissan Skyline GT-R R32 \/ R33 \/ R34. It swaps the factory head bolts for studs, nuts and washers. The studs are wound into the block by hand and the head is clamped by torquing the nuts, which gives more even, repeatable clamping than factory stretch bolts and saves wear on the block threads each time the head comes off.\u003c\/p\u003e\n\u003cp\u003eMore clamping load helps the head gasket seal against high cylinder pressure, which is why head studs are one of the first parts fitted to a boosted or high-compression build.\u003c\/p\u003e\n\u003cp\u003eMaterial: Custom Age 625+ super-alloy rated at 260,000–280,000 psi tensile strength.\u003c\/p\u003e\n\u003cp\u003eSee the Vehicle Fitment tab for the full list of vehicles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Installation by a professional is recommended.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMade in the USA by ARP\u003c\/li\u003e\n\u003cli\u003eCustom Age 625+ super-alloy, 260,000–280,000 psi\u003c\/li\u003e\n\u003cli\u003eThread \/ diameter: M12 x 1.5\u003c\/li\u003e\n\u003cli\u003eARP torque spec: 140 ft-lb (190 Nm) in three steps with ARP Ultra-Torque\u003c\/li\u003e\n\u003cli\u003eInstallation instructions available from ARP (see Technical Specifications)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"chicane-links\"\u003eShop more: \u003ca href=\"\/collections\/arp\"\u003eARP\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eNeed help choosing parts? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"ARP","offers":[{"title":"Default Title","offer_id":53928520712485,"sku":"202-4208","price":1440.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/fbfb8d13dadcf0193d204973ad35849c.jpg?v=1790812379"},{"product_id":"nitto-forged-stroker-pistons-nissan-rb26dett-skyline-gt-r-r32-r33-r34","title":"Nitto Forged Stroker Pistons - Nissan RB26DETT - Skyline GT-R (R32 \/ R33 \/ R34)","description":"\u003ch2\u003eNitto Forged Stroker Pistons - Nissan RB26DETT - Skyline GT-R (R32 \/ R33 \/ R34)\u003c\/h2\u003e\u003cp\u003eA set of six forged pistons for building a 2.7-litre or 2.8-litre RB26DETT in the R32, R33 or R34 Skyline GT-R. Matched to Nitto's stroker crankshafts, they add capacity while keeping the RB26's appetite for revs, for street, drag and circuit builds.\u003c\/p\u003e\u003cp\u003eFirst pick the capacity to match your crank: 2.7L for a 75.7 mm stroke or 2.8L for a 77.7 mm stroke. Then pick the bore: 86.5 mm (0.020\" oversize) or 87.0 mm (0.040\" oversize). Dome volumes are 2.7L 86.5 mm +17 cc, 2.7L 87.0 mm +16 cc, 2.8L 86.5 mm +18.5 cc and 2.8L 87.0 mm +17 cc.\u003c\/p\u003e\u003cp\u003eEvery Nitto piston is produced by CP Carrillo in the USA to Nitto's own specification. They are forged from CP's low-silicon 2618 alloy in the Turbo HD forging, paired with a PVD-coated ring set for tight bore sealing under boost, and fitted with CP's 9310 wrist pins, which are Rockwell tested, case hardened and cryogenically treated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Installation by a professional is recommended. Engine internals must be measured and set up by a qualified engine builder.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eForged from low-silicon 2618 aluminium, Turbo HD forging\u003c\/li\u003e\n\u003cli\u003eMade by CP Carrillo to Nitto's specification\u003c\/li\u003e\n\u003cli\u003ePVD-coated ring set for strong bore sealing and low friction\u003c\/li\u003e\n\u003cli\u003e9310 wrist pins (0.866\" diameter, 2.500\" long), 100% Rockwell tested, case hardened and cryo treated\u003c\/li\u003e\n\u003cli\u003eForced double pin oiling to keep the wrist pin lubricated\u003c\/li\u003e\n\u003cli\u003eAnti-detonation grooves to help protect the top ring\u003c\/li\u003e\n\u003cli\u003eAccumulator grooves to reduce top ring flutter and improve ring seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eKit Contents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e6 x Nitto \/ CP Carrillo forged pistons\u003c\/li\u003e\n\u003cli\u003e6 x PVD-coated ring sets\u003c\/li\u003e\n\u003cli\u003e6 x 9310 wrist pins\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eNitto parts are made for racing and off-road use. Check every part during assembly and blueprinting, and contact us before fitting if anything measures out of tolerance. Nitto will repair or replace a defective part at its option, and any modification voids the warranty. Full terms: \u003ca href=\"https:\/\/irp.cdn-website.com\/3120b340\/files\/uploaded\/Limited_Warranty_250724.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNitto limited warranty (PDF)\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-billet-crankshaft-nissan-rb26dett-skyline-gt-r-r32-r33-r34\"\u003eNitto Billet Crankshaft - Nissan RB26DETT - Skyline GT-R (R32 \/ R33 \/ R34)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-i-beam-connecting-rods-nissan-rb25det-rb26dett-skyline-skyline-gt-r-r32-r33-r34-stagea-wc34\"\u003eNitto I-Beam Connecting Rods - Nissan RB25DET \/ RB26DETT - Skyline \/ Skyline GT-R (R32 \/ R33 \/ R34) \/ Stagea (WC34)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-v2-i-beam-connecting-rods-nissan-rb25det-rb26dett-skyline-skyline-gt-r-r32-r33-r34-stagea-wc34\"\u003eNitto V2 I-Beam Connecting Rods - Nissan RB25DET \/ RB26DETT - Skyline \/ Skyline GT-R (R32 \/ R33 \/ R34) \/ Stagea (WC34)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"chicane-links\"\u003eShop more: \u003ca href=\"\/collections\/nitto\"\u003eNitto\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eNeed help choosing parts? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Nitto","offers":[{"title":"2.7L (75.7 mm stroke) \/ 86.5 mm (+0.020\")","offer_id":53972093632805,"sku":"NIT-CP-RB262720","price":2520.0,"currency_code":"AUD","in_stock":true},{"title":"2.7L (75.7 mm stroke) \/ 87.0 mm (+0.040\")","offer_id":53972093665573,"sku":"NIT-CP-RB262740","price":2520.0,"currency_code":"AUD","in_stock":true},{"title":"2.8L (77.7 mm stroke) \/ 86.5 mm (+0.020\")","offer_id":53972093698341,"sku":"NIT-CP-RB262820","price":2520.0,"currency_code":"AUD","in_stock":true},{"title":"2.8L (77.7 mm stroke) \/ 87.0 mm (+0.040\")","offer_id":53972093731109,"sku":"NIT-CP-RB262840","price":2520.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/4838905442.png?v=1791323631"},{"product_id":"nitto-oil-gallery-restrictor-nissan-rb25det-rb26dett-rb30-skyline-skyline-gt-r-r31-r34-stagea-wc34-commodore-vl","title":"Nitto Oil Gallery Restrictor - Nissan RB25DET \/ RB26DETT \/ RB30 - Skyline \/ Skyline GT-R (R31–R34) \/ Stagea (WC34) \/ Commodore (VL)","description":"\u003ch2\u003eNitto Oil Gallery Restrictor - Nissan RB25DET \/ RB26DETT \/ RB30 - Skyline \/ Skyline GT-R (R31–R34) \/ Stagea (WC34) \/ Commodore (VL)\u003c\/h2\u003e\u003cp\u003eA precision-made oil gallery restrictor for Nissan RB engines. Restricting the gallery is one of the simplest and cheapest ways to manage oil flow and pressure in a built RB.\u003c\/p\u003e\u003cp\u003eChoose the orifice size: 1.1 mm, 1.3 mm or 1.5 mm, or the block-off (0 mm). Your engine builder can advise the right size for your oil system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Installation by a professional is recommended. Engine internals must be measured and set up by a qualified engine builder.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrecision manufactured for an accurate orifice size\u003c\/li\u003e\n\u003cli\u003eSimple, easy fitment\u003c\/li\u003e\n\u003cli\u003eSizes: 1.1 mm, 1.3 mm, 1.5 mm or block-off\u003c\/li\u003e\n\u003cli\u003eLow-cost way to control oil flow and pressure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eNitto parts are made for racing and off-road use. Check every part during assembly and blueprinting, and contact us before fitting if anything measures out of tolerance. Nitto will repair or replace a defective part at its option, and any modification voids the warranty. Full terms: \u003ca href=\"https:\/\/irp.cdn-website.com\/3120b340\/files\/uploaded\/Limited_Warranty_250724.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNitto limited warranty (PDF)\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-oil-pump-nissan-rb25det-rb26dett-rb30-skyline-skyline-gt-r-r31-r34-stagea-wc34-commodore-vl\"\u003eNitto Oil Pump - Nissan RB25DET \/ RB26DETT \/ RB30 - Skyline \/ Skyline GT-R (R31–R34) \/ Stagea (WC34) \/ Commodore (VL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-billet-externally-adjustable-oil-pump-nissan-rb25det-rb26dett-rb30-skyline-skyline-gt-r-r31-r34-stagea-wc34-commodore-vl\"\u003eNitto Billet Externally Adjustable Oil Pump - Nissan RB25DET \/ RB26DETT \/ RB30 - Skyline \/ Skyline GT-R (R31–R34) \/ Stagea (WC34) \/ Commodore (VL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-oil-pump-external-feed-fitting-nissan-rb25det-rb26dett-rb30-skyline-skyline-gt-r-r31-r34-stagea-wc34-commodore-vl\"\u003eNitto Oil Pump External Feed Fitting - Nissan RB25DET \/ RB26DETT \/ RB30 - Skyline \/ Skyline GT-R (R31–R34) \/ Stagea (WC34) \/ Commodore (VL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-crank-collar-nissan-rb25det-rb26dett-rb30-skyline-skyline-gt-r-r31-r34-stagea-wc34-commodore-vl\"\u003eNitto Crank Collar - Nissan RB25DET \/ RB26DETT \/ RB30 - Skyline \/ Skyline GT-R (R31–R34) \/ Stagea (WC34) \/ Commodore (VL)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"chicane-links\"\u003eShop more: \u003ca href=\"\/collections\/nitto\"\u003eNitto\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eNeed help choosing parts? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Nitto","offers":[{"title":"1.1 mm","offer_id":53972338737445,"sku":"NIT-OIL-RES11","price":17.0,"currency_code":"AUD","in_stock":true},{"title":"1.3 mm","offer_id":53972338770213,"sku":"NIT-OIL-RES13","price":17.0,"currency_code":"AUD","in_stock":true},{"title":"1.5 mm","offer_id":53972338802981,"sku":"NIT-OIL-RES15","price":17.0,"currency_code":"AUD","in_stock":true},{"title":"Block-off","offer_id":53972338835749,"sku":"NIT-OIL-RESB","price":14.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/3129796720.png?v=1791323501"},{"product_id":"nitto-billet-crank-timing-gear-washer-kit-nissan-rb20-rb25-rb26-rb30-skyline-skyline-gt-r-r31-r34-stagea-wc34-commodore-vl","title":"Nitto Billet Crank Timing Gear \u0026 Washer Kit - Nissan RB20 \/ RB25 \/ RB26 \/ RB30 - Skyline \/ Skyline GT-R (R31–R34) \/ Stagea (WC34) \/ Commodore (VL)","description":"\u003ch2\u003eNitto Billet Crank Timing Gear \u0026amp; Washer Kit - Nissan RB20 \/ RB25 \/ RB26 \/ RB30 - Skyline \/ Skyline GT-R (R31–R34) \/ Stagea (WC34) \/ Commodore (VL)\u003c\/h2\u003e\u003cp\u003eA billet crankshaft timing gear and washer kit for Nissan RB20, RB25, RB26 and RB30 engines. It is designed for high-horsepower, high-revving RB and Nitto stroker engines in drag and circuit use, where the factory gear and keys are pushed hard.\u003c\/p\u003e\u003cp\u003eBuy the full kit (timing gear, inner and outer washers and woodruff keys), or the timing gear, inside washer, outside washer or a single woodruff key on its own.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Installation by a professional is recommended. Engine internals must be measured and set up by a qualified engine builder.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e4340 billet steel crank timing gear\u003c\/li\u003e\n\u003cli\u003eEN26 billet steel washers either side of the gear\u003c\/li\u003e\n\u003cli\u003eNitto billet woodruff keys hold the assembly in place\u003c\/li\u003e\n\u003cli\u003eDesigned for high-rpm RB and Nitto stroker engines\u003c\/li\u003e\n\u003cli\u003eEach piece hand checked by a Nitto technician\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eNitto parts are made for racing and off-road use. Check every part during assembly and blueprinting, and contact us before fitting if anything measures out of tolerance. Nitto will repair or replace a defective part at its option, and any modification voids the warranty. Full terms: \u003ca href=\"https:\/\/irp.cdn-website.com\/3120b340\/files\/uploaded\/Limited_Warranty_250724.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNitto limited warranty (PDF)\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-billet-crankshaft-nissan-rb26dett-skyline-gt-r-r32-r33-r34\"\u003eNitto Billet Crankshaft - Nissan RB26DETT - Skyline GT-R (R32 \/ R33 \/ R34)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-crank-collar-nissan-rb25det-rb26dett-rb30-skyline-skyline-gt-r-r31-r34-stagea-wc34-commodore-vl\"\u003eNitto Crank Collar - Nissan RB25DET \/ RB26DETT \/ RB30 - Skyline \/ Skyline GT-R (R31–R34) \/ Stagea (WC34) \/ Commodore (VL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-oil-pump-nissan-rb25det-rb26dett-rb30-skyline-skyline-gt-r-r31-r34-stagea-wc34-commodore-vl\"\u003eNitto Oil Pump - Nissan RB25DET \/ RB26DETT \/ RB30 - Skyline \/ Skyline GT-R (R31–R34) \/ Stagea (WC34) \/ Commodore (VL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-clear-timing-belt-cover-nissan-rb26dett-skyline-gt-r-r32-r33-r34\"\u003eNitto Clear Timing Belt Cover - Nissan RB26DETT - Skyline GT-R (R32 \/ R33 \/ R34)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"chicane-links\"\u003eShop more: \u003ca href=\"\/collections\/nitto\"\u003eNitto\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eNeed help choosing parts? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Nitto","offers":[{"title":"Full kit (gear, washers \u0026 keys)","offer_id":53972341948709,"sku":"NIT-CRGR-SETRB","price":335.0,"currency_code":"AUD","in_stock":true},{"title":"Timing gear only","offer_id":53972341981477,"sku":"NIT-CRGGEAR-GEAR","price":125.0,"currency_code":"AUD","in_stock":true},{"title":"Inside washer","offer_id":53972342014245,"sku":"NIT-CRGR-IPLRB","price":95.0,"currency_code":"AUD","in_stock":true},{"title":"Outside washer","offer_id":53972342047013,"sku":"NIT-CRGR-OPLRB","price":95.0,"currency_code":"AUD","in_stock":true},{"title":"Woodruff key (each)","offer_id":53972342079781,"sku":"NIT-CRGR-KEYRB","price":25.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/4839197479.png?v=1791323523"},{"product_id":"nitto-crank-collar-nissan-rb25det-rb26dett-rb30-skyline-skyline-gt-r-r31-r34-stagea-wc34-commodore-vl","title":"Nitto Crank Collar - Nissan RB25DET \/ RB26DETT \/ RB30 - Skyline \/ Skyline GT-R (R31–R34) \/ Stagea (WC34) \/ Commodore (VL)","description":"\u003ch2\u003eNitto Crank Collar - Nissan RB25DET \/ RB26DETT \/ RB30 - Skyline \/ Skyline GT-R (R31–R34) \/ Stagea (WC34) \/ Commodore (VL)\u003c\/h2\u003e\u003cp\u003eAn extended crank collar machined from high-tensile 709 steel to drive the oil pump on Nissan RB engines. The longer drive surface gives the pump gear more to grip, which helps prevent the pump failures linked to early short-snout RB26 cranks. It is a low-cost reliability upgrade for any built RB.\u003c\/p\u003e\u003cp\u003eChoose the drive to match your pump. The Flat Drive collar is needed for early R32 GT-R, all GTS-T and RB30 engines. The Sine Drive collar is required for every Nitto Sine Drive pump and only works with Nitto Sine Drive pumps. Sine Drive instructions: \u003ca href=\"https:\/\/irp.cdn-website.com\/3120b340\/files\/uploaded\/Sine_Drive_Collar_Note_250724.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSine Drive collar note (PDF)\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Installation by a professional is recommended. Engine internals must be measured and set up by a qualified engine builder.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMachined from high-tensile 709 steel\u003c\/li\u003e\n\u003cli\u003eLonger drive surface for the oil pump inner gear\u003c\/li\u003e\n\u003cli\u003eDrive edges resist wear under high load\u003c\/li\u003e\n\u003cli\u003eLocked to the crank with M6 grub screws\u003c\/li\u003e\n\u003cli\u003eSine Drive collar has pilot holes machined for the grub screws\u003c\/li\u003e\n\u003cli\u003eEach collar hand checked by a Nitto technician\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eNitto parts are made for racing and off-road use. Check every part during assembly and blueprinting, and contact us before fitting if anything measures out of tolerance. Nitto will repair or replace a defective part at its option, and any modification voids the warranty. Full terms: \u003ca href=\"https:\/\/irp.cdn-website.com\/3120b340\/files\/uploaded\/Limited_Warranty_250724.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNitto limited warranty (PDF)\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-oil-pump-nissan-rb25det-rb26dett-rb30-skyline-skyline-gt-r-r31-r34-stagea-wc34-commodore-vl\"\u003eNitto Oil Pump - Nissan RB25DET \/ RB26DETT \/ RB30 - Skyline \/ Skyline GT-R (R31–R34) \/ Stagea (WC34) \/ Commodore (VL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-billet-externally-adjustable-oil-pump-nissan-rb25det-rb26dett-rb30-skyline-skyline-gt-r-r31-r34-stagea-wc34-commodore-vl\"\u003eNitto Billet Externally Adjustable Oil Pump - Nissan RB25DET \/ RB26DETT \/ RB30 - Skyline \/ Skyline GT-R (R31–R34) \/ Stagea (WC34) \/ Commodore (VL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-billet-crank-timing-gear-washer-kit-nissan-rb20-rb25-rb26-rb30-skyline-skyline-gt-r-r31-r34-stagea-wc34-commodore-vl\"\u003eNitto Billet Crank Timing Gear \u0026amp; Washer Kit - Nissan RB20 \/ RB25 \/ RB26 \/ RB30 - Skyline \/ Skyline GT-R (R31–R34) \/ Stagea (WC34) \/ Commodore (VL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-billet-crankshaft-nissan-rb26dett-skyline-gt-r-r32-r33-r34\"\u003eNitto Billet Crankshaft - Nissan RB26DETT - Skyline GT-R (R32 \/ R33 \/ R34)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-oil-gallery-restrictor-nissan-rb25det-rb26dett-rb30-skyline-skyline-gt-r-r31-r34-stagea-wc34-commodore-vl\"\u003eNitto Oil Gallery Restrictor - Nissan RB25DET \/ RB26DETT \/ RB30 - Skyline \/ Skyline GT-R (R31–R34) \/ Stagea (WC34) \/ Commodore (VL)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"chicane-links\"\u003eShop more: \u003ca href=\"\/collections\/nitto\"\u003eNitto\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eNeed help choosing parts? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Nitto","offers":[{"title":"Flat drive","offer_id":53972344537381,"sku":"NIT-OIL-COL","price":160.0,"currency_code":"AUD","in_stock":true},{"title":"Sine drive","offer_id":53972344570149,"sku":"NIT-OIL-COLSINE","price":205.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/4839197394.png?v=1791323530"},{"product_id":"nitto-oil-pump-external-feed-fitting-nissan-rb25det-rb26dett-rb30-skyline-skyline-gt-r-r31-r34-stagea-wc34-commodore-vl","title":"Nitto Oil Pump External Feed Fitting - Nissan RB25DET \/ RB26DETT \/ RB30 - Skyline \/ Skyline GT-R (R31–R34) \/ Stagea (WC34) \/ Commodore (VL)","description":"\u003ch2\u003eNitto Oil Pump External Feed Fitting - Nissan RB25DET \/ RB26DETT \/ RB30 - Skyline \/ Skyline GT-R (R31–R34) \/ Stagea (WC34) \/ Commodore (VL)\u003c\/h2\u003e\u003cp\u003eA shorty fitting that lets you add an external oil feed to a Nissan RB oil pump for better oil delivery into the pump. You can run it alongside the internal feed from the block, or on its own with the internal feed blocked off.\u003c\/p\u003e\u003cp\u003eChoose the fitting to suit your pump. The cast pump version converts the 1\/2\" NPT port to -12AN; the billet pump version converts the -10AN port to -12AN. Both have a 15.6 mm internal diameter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Installation by a professional is recommended. Engine internals must be measured and set up by a qualified engine builder.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMachined from 4140 hex bar\u003c\/li\u003e\n\u003cli\u003e-12AN outlet with a 15.6 mm internal diameter\u003c\/li\u003e\n\u003cli\u003eScrews straight in where the inlet-side plug was\u003c\/li\u003e\n\u003cli\u003eRun external feed only, or internal and external together\u003c\/li\u003e\n\u003cli\u003eFits within the factory air-conditioning layout with minimal modification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eNitto parts are made for racing and off-road use. Check every part during assembly and blueprinting, and contact us before fitting if anything measures out of tolerance. Nitto will repair or replace a defective part at its option, and any modification voids the warranty. Full terms: \u003ca href=\"https:\/\/irp.cdn-website.com\/3120b340\/files\/uploaded\/Limited_Warranty_250724.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNitto limited warranty (PDF)\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-billet-externally-adjustable-oil-pump-nissan-rb25det-rb26dett-rb30-skyline-skyline-gt-r-r31-r34-stagea-wc34-commodore-vl\"\u003eNitto Billet Externally Adjustable Oil Pump - Nissan RB25DET \/ RB26DETT \/ RB30 - Skyline \/ Skyline GT-R (R31–R34) \/ Stagea (WC34) \/ Commodore (VL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-oil-pump-nissan-rb25det-rb26dett-rb30-skyline-skyline-gt-r-r31-r34-stagea-wc34-commodore-vl\"\u003eNitto Oil Pump - Nissan RB25DET \/ RB26DETT \/ RB30 - Skyline \/ Skyline GT-R (R31–R34) \/ Stagea (WC34) \/ Commodore (VL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-oil-gallery-restrictor-nissan-rb25det-rb26dett-rb30-skyline-skyline-gt-r-r31-r34-stagea-wc34-commodore-vl\"\u003eNitto Oil Gallery Restrictor - Nissan RB25DET \/ RB26DETT \/ RB30 - Skyline \/ Skyline GT-R (R31–R34) \/ Stagea (WC34) \/ Commodore (VL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-crank-collar-nissan-rb25det-rb26dett-rb30-skyline-skyline-gt-r-r31-r34-stagea-wc34-commodore-vl\"\u003eNitto Crank Collar - Nissan RB25DET \/ RB26DETT \/ RB30 - Skyline \/ Skyline GT-R (R31–R34) \/ Stagea (WC34) \/ Commodore (VL)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"chicane-links\"\u003eShop more: \u003ca href=\"\/collections\/nitto\"\u003eNitto\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eNeed help choosing parts? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Nitto","offers":[{"title":"Cast pump: 1\/2\" NPT to -12AN","offer_id":53972344635685,"sku":"NIT-OIL-1\/2 NPT-C","price":85.0,"currency_code":"AUD","in_stock":true},{"title":"Billet pump: -10AN to -12AN","offer_id":53972344668453,"sku":"NIT-OIL-12AN-B","price":85.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/3319549995.png?v=1791323532"},{"product_id":"nitto-billet-externally-adjustable-oil-pump-nissan-rb25det-rb26dett-rb30-skyline-skyline-gt-r-r31-r34-stagea-wc34-commodore-vl","title":"Nitto Billet Externally Adjustable Oil Pump - Nissan RB25DET \/ RB26DETT \/ RB30 - Skyline \/ Skyline GT-R (R31–R34) \/ Stagea (WC34) \/ Commodore (VL)","description":"\u003ch2\u003eNitto Billet Externally Adjustable Oil Pump - Nissan RB25DET \/ RB26DETT \/ RB30 - Skyline \/ Skyline GT-R (R31–R34) \/ Stagea (WC34) \/ Commodore (VL)\u003c\/h2\u003e\u003cp\u003eAn externally adjustable oil pump for Nissan RB engines, machined from 7075 billet aluminium and hand assembled and tested by Nitto. It is built for high-power street, drag and circuit RBs where oil pressure and pump reliability matter most.\u003c\/p\u003e\u003cp\u003eThis pump is Sine Drive only and must be used with the Nitto Sine Drive crank collar (sold separately). It can be fed from the factory internal pickup, an external -10AN feed, or both at once.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Installation by a professional is recommended. Engine internals must be measured and set up by a qualified engine builder.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHousing and backing plate machined from 7075 billet aluminium\u003c\/li\u003e\n\u003cli\u003eEN26 billet steel gears\u003c\/li\u003e\n\u003cli\u003eExternally adjustable oil pressure\u003c\/li\u003e\n\u003cli\u003eRevised internal galleries with tighter clearances for higher pressure\u003c\/li\u003e\n\u003cli\u003eOptional -10AN external pickup feed, with or without the internal feed\u003c\/li\u003e\n\u003cli\u003eHand assembled and tested in house by Nitto\u003c\/li\u003e\n\u003cli\u003eSupplied with gasket and front seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eNitto parts are made for racing and off-road use. Check every part during assembly and blueprinting, and contact us before fitting if anything measures out of tolerance. Nitto will repair or replace a defective part at its option, and any modification voids the warranty. Full terms: \u003ca href=\"https:\/\/irp.cdn-website.com\/3120b340\/files\/uploaded\/Limited_Warranty_250724.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNitto limited warranty (PDF)\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-crank-collar-nissan-rb25det-rb26dett-rb30-skyline-skyline-gt-r-r31-r34-stagea-wc34-commodore-vl\"\u003eNitto Crank Collar - Nissan RB25DET \/ RB26DETT \/ RB30 - Skyline \/ Skyline GT-R (R31–R34) \/ Stagea (WC34) \/ Commodore (VL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-oil-pump-external-feed-fitting-nissan-rb25det-rb26dett-rb30-skyline-skyline-gt-r-r31-r34-stagea-wc34-commodore-vl\"\u003eNitto Oil Pump External Feed Fitting - Nissan RB25DET \/ RB26DETT \/ RB30 - Skyline \/ Skyline GT-R (R31–R34) \/ Stagea (WC34) \/ Commodore (VL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-oil-gallery-restrictor-nissan-rb25det-rb26dett-rb30-skyline-skyline-gt-r-r31-r34-stagea-wc34-commodore-vl\"\u003eNitto Oil Gallery Restrictor - Nissan RB25DET \/ RB26DETT \/ RB30 - Skyline \/ Skyline GT-R (R31–R34) \/ Stagea (WC34) \/ Commodore (VL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-oil-pump-nissan-rb25det-rb26dett-rb30-skyline-skyline-gt-r-r31-r34-stagea-wc34-commodore-vl\"\u003eNitto Oil Pump - Nissan RB25DET \/ RB26DETT \/ RB30 - Skyline \/ Skyline GT-R (R31–R34) \/ Stagea (WC34) \/ Commodore (VL)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"chicane-links\"\u003eShop more: \u003ca href=\"\/collections\/nitto\"\u003eNitto\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eNeed help choosing parts? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Nitto","offers":[{"title":"Default Title","offer_id":53972350173477,"sku":"NIT-OIL-BILLETRB","price":2165.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/3129737092.png?v=1791323576"},{"product_id":"nitto-clear-timing-belt-cover-nissan-rb26dett-skyline-gt-r-r32-r33-r34","title":"Nitto Clear Timing Belt Cover - Nissan RB26DETT - Skyline GT-R (R32 \/ R33 \/ R34)","description":"\u003ch2\u003eNitto Clear Timing Belt Cover - Nissan RB26DETT - Skyline GT-R (R32 \/ R33 \/ R34)\u003c\/h2\u003e\u003cp\u003eA clear polycarbonate timing belt cover for the Nissan RB26DETT in the R32, R33 and R34 Skyline GT-R. It puts your adjustable cam gears and timing belt on show and adds a custom finishing touch to the engine bay.\u003c\/p\u003e\u003cp\u003eIt suits any Nissan RB engine running an RB26 head and RB26 cam covers. The cover can also be tinted or coloured to match your engine bay.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Installation by a professional is recommended. Engine internals must be measured and set up by a qualified engine builder.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDurable clear polycarbonate\u003c\/li\u003e\n\u003cli\u003eDirect fit on RB engines with an RB26 head and cam covers\u003c\/li\u003e\n\u003cli\u003eShows off cam gears and timing belt\u003c\/li\u003e\n\u003cli\u003eEasy to tint or colour to suit your build\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eNitto parts are made for racing and off-road use. Check every part during assembly and blueprinting, and contact us before fitting if anything measures out of tolerance. Nitto will repair or replace a defective part at its option, and any modification voids the warranty. Full terms: \u003ca href=\"https:\/\/irp.cdn-website.com\/3120b340\/files\/uploaded\/Limited_Warranty_250724.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNitto limited warranty (PDF)\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-billet-crank-timing-gear-washer-kit-nissan-rb20-rb25-rb26-rb30-skyline-skyline-gt-r-r31-r34-stagea-wc34-commodore-vl\"\u003eNitto Billet Crank Timing Gear \u0026amp; Washer Kit - Nissan RB20 \/ RB25 \/ RB26 \/ RB30 - Skyline \/ Skyline GT-R (R31–R34) \/ Stagea (WC34) \/ Commodore (VL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-intake-exhaust-metal-gasket-kit-nissan-rb26dett-skyline-gt-r-r32-r33-r34\"\u003eNitto Intake \u0026amp; Exhaust Metal Gasket Kit - Nissan RB26DETT - Skyline GT-R (R32 \/ R33 \/ R34)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-engine-gasket-kit-nissan-rb26dett-skyline-gt-r-r32-r33-r34\"\u003eNitto Engine Gasket Kit - Nissan RB26DETT - Skyline GT-R (R32 \/ R33 \/ R34)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"chicane-links\"\u003eShop more: \u003ca href=\"\/collections\/nitto\"\u003eNitto\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eNeed help choosing parts? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Nitto","offers":[{"title":"Default Title","offer_id":53972350435621,"sku":"NIT-CCC-RB26","price":98.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/2802973069.jpg?v=1791323578"},{"product_id":"nitto-engine-gasket-kit-nissan-rb26dett-skyline-gt-r-r32-r33-r34","title":"Nitto Engine Gasket Kit - Nissan RB26DETT - Skyline GT-R (R32 \/ R33 \/ R34)","description":"\u003ch2\u003eNitto Engine Gasket Kit - Nissan RB26DETT - Skyline GT-R (R32 \/ R33 \/ R34)\u003c\/h2\u003e\u003cp\u003eA complete engine gasket set for rebuilding the Nissan RB26DETT in the R32, R33 and R34 Skyline GT-R. It brings together OEM-quality gaskets and seals in one kit, saving the hunt for individual parts on a full rebuild.\u003c\/p\u003e\u003cp\u003eThe head gasket is not included, so you can pair the kit with a Nitto DBS metal head gasket in the thickness your build needs, or choose the matching Nitto full gasket kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Installation by a professional is recommended. Engine internals must be measured and set up by a qualified engine builder.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePremium OEM-quality gaskets and seals\u003c\/li\u003e\n\u003cli\u003eSupplied without a head gasket so the builder can choose the thickness\u003c\/li\u003e\n\u003cli\u003eTested to cope with demanding motorsport conditions\u003c\/li\u003e\n\u003cli\u003eMade for professional engine builders\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eNitto parts are made for racing and off-road use. Check every part during assembly and blueprinting, and contact us before fitting if anything measures out of tolerance. Nitto will repair or replace a defective part at its option, and any modification voids the warranty. Full terms: \u003ca href=\"https:\/\/irp.cdn-website.com\/3120b340\/files\/uploaded\/Limited_Warranty_250724.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNitto limited warranty (PDF)\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-full-gasket-kit-nissan-rb26dett-skyline-gt-r-r32-r33-r34\"\u003eNitto Full Gasket Kit - Nissan RB26DETT - Skyline GT-R (R32 \/ R33 \/ R34)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-intake-exhaust-metal-gasket-kit-nissan-rb26dett-skyline-gt-r-r32-r33-r34\"\u003eNitto Intake \u0026amp; Exhaust Metal Gasket Kit - Nissan RB26DETT - Skyline GT-R (R32 \/ R33 \/ R34)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-forged-pistons-nissan-rb26dett-skyline-gt-r-r32-r33-r34\"\u003eNitto Forged Pistons - Nissan RB26DETT - Skyline GT-R (R32 \/ R33 \/ R34)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"chicane-links\"\u003eShop more: \u003ca href=\"\/collections\/nitto\"\u003eNitto\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eNeed help choosing parts? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Nitto","offers":[{"title":"Default Title","offer_id":53972350992677,"sku":"NIT-EGK-RB26","price":315.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/2732343022.png?v=1791323582"},{"product_id":"nitto-intake-exhaust-metal-gasket-kit-nissan-rb26dett-skyline-gt-r-r32-r33-r34","title":"Nitto Intake \u0026 Exhaust Metal Gasket Kit - Nissan RB26DETT - Skyline GT-R (R32 \/ R33 \/ R34)","description":"\u003ch2\u003eNitto Intake \u0026amp; Exhaust Metal Gasket Kit - Nissan RB26DETT - Skyline GT-R (R32 \/ R33 \/ R34)\u003c\/h2\u003e\u003cp\u003eA stainless steel intake and exhaust manifold gasket set for the Nissan RB26DETT in the R32, R33 and R34 Skyline GT-R. It replaces the factory paper-style gaskets, which harden, thin out and eventually blow out under boost, causing boost leaks and rough running.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Installation by a professional is recommended. Engine internals must be measured and set up by a qualified engine builder.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHigh-grade stainless steel construction\u003c\/li\u003e\n\u003cli\u003eMulti-layer exhaust gaskets for a better seal between head and manifold\u003c\/li\u003e\n\u003cli\u003eSuits ported and non-ported heads\u003c\/li\u003e\n\u003cli\u003eNo trimming needed in most applications\u003c\/li\u003e\n\u003cli\u003eReplaces fatigue-prone factory intake gaskets\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eNitto parts are made for racing and off-road use. Check every part during assembly and blueprinting, and contact us before fitting if anything measures out of tolerance. Nitto will repair or replace a defective part at its option, and any modification voids the warranty. Full terms: \u003ca href=\"https:\/\/irp.cdn-website.com\/3120b340\/files\/uploaded\/Limited_Warranty_250724.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNitto limited warranty (PDF)\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-full-gasket-kit-nissan-rb26dett-skyline-gt-r-r32-r33-r34\"\u003eNitto Full Gasket Kit - Nissan RB26DETT - Skyline GT-R (R32 \/ R33 \/ R34)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-engine-gasket-kit-nissan-rb26dett-skyline-gt-r-r32-r33-r34\"\u003eNitto Engine Gasket Kit - Nissan RB26DETT - Skyline GT-R (R32 \/ R33 \/ R34)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-clear-timing-belt-cover-nissan-rb26dett-skyline-gt-r-r32-r33-r34\"\u003eNitto Clear Timing Belt Cover - Nissan RB26DETT - Skyline GT-R (R32 \/ R33 \/ R34)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"chicane-links\"\u003eShop more: \u003ca href=\"\/collections\/nitto\"\u003eNitto\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eNeed help choosing parts? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Nitto","offers":[{"title":"Default Title","offer_id":53972351189285,"sku":"NIT-MGK-RB26","price":215.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/2324581124.jpg?v=1791323584"},{"product_id":"nitto-billet-crankshaft-nissan-rb26dett-skyline-gt-r-r32-r33-r34","title":"Nitto Billet Crankshaft - Nissan RB26DETT - Skyline GT-R (R32 \/ R33 \/ R34)","description":"\u003ch2\u003eNitto Billet Crankshaft - Nissan RB26DETT - Skyline GT-R (R32 \/ R33 \/ R34)\u003c\/h2\u003e\u003cp\u003eA billet 4340 crankshaft for the Nissan RB26DETT in the R32, R33 and R34 Skyline GT-R. It is designed for high-power builds that need a stiff, smooth-revving crank, from a 2.6-litre rebuild through to a 2.8-litre stroker for drag or circuit use.\u003c\/p\u003e\u003cp\u003eChoose the capacity and journal. Standard journal cranks come in 2.6L (73.7 mm stroke), 2.7L (75.7 mm) and 2.8L (77.7 mm), all with tear-drop cross-drilled oiling. The 2.8L wide journal crank (77.7 mm) has straight-shot oiling and must be used with Nitto wide-journal V2 rods.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Installation by a professional is recommended. Engine internals must be measured and set up by a qualified engine builder.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMachined from double-melted 4340 billet round bar, X-ray and sonic grade tested\u003c\/li\u003e\n\u003cli\u003eQuenched, heat treated and nitrided, with a sample piece checked from each batch\u003c\/li\u003e\n\u003cli\u003eFully counterweighted and balanced\u003c\/li\u003e\n\u003cli\u003eKnife-edged counterweights where applicable\u003c\/li\u003e\n\u003cli\u003eTear-drop cross-drilled oiling (standard journal) or straight-shot oiling (wide journal)\u003c\/li\u003e\n\u003cli\u003e100% CNC profiled, drilled and tapped\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eNitto parts are made for racing and off-road use. Check every part during assembly and blueprinting, and contact us before fitting if anything measures out of tolerance. Nitto will repair or replace a defective part at its option, and any modification voids the warranty. Full terms: \u003ca href=\"https:\/\/irp.cdn-website.com\/3120b340\/files\/uploaded\/Limited_Warranty_250724.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNitto limited warranty (PDF)\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-forged-stroker-pistons-nissan-rb26dett-skyline-gt-r-r32-r33-r34\"\u003eNitto Forged Stroker Pistons - Nissan RB26DETT - Skyline GT-R (R32 \/ R33 \/ R34)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-v2-i-beam-connecting-rods-nissan-rb25det-rb26dett-skyline-skyline-gt-r-r32-r33-r34-stagea-wc34\"\u003eNitto V2 I-Beam Connecting Rods - Nissan RB25DET \/ RB26DETT - Skyline \/ Skyline GT-R (R32 \/ R33 \/ R34) \/ Stagea (WC34)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-i-beam-connecting-rods-nissan-rb25det-rb26dett-skyline-skyline-gt-r-r32-r33-r34-stagea-wc34\"\u003eNitto I-Beam Connecting Rods - Nissan RB25DET \/ RB26DETT - Skyline \/ Skyline GT-R (R32 \/ R33 \/ R34) \/ Stagea (WC34)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-billet-crank-timing-gear-washer-kit-nissan-rb20-rb25-rb26-rb30-skyline-skyline-gt-r-r31-r34-stagea-wc34-commodore-vl\"\u003eNitto Billet Crank Timing Gear \u0026amp; Washer Kit - Nissan RB20 \/ RB25 \/ RB26 \/ RB30 - Skyline \/ Skyline GT-R (R31–R34) \/ Stagea (WC34) \/ Commodore (VL)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"chicane-links\"\u003eShop more: \u003ca href=\"\/collections\/nitto\"\u003eNitto\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eNeed help choosing parts? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Nitto","offers":[{"title":"2.6L (73.7 mm stroke) \/ Standard journal","offer_id":53972353777957,"sku":"NIT-CNK-RB26STD","price":6180.0,"currency_code":"AUD","in_stock":true},{"title":"2.7L (75.7 mm stroke) \/ Standard journal","offer_id":53972353810725,"sku":"NIT-CNK-RB26S757","price":6180.0,"currency_code":"AUD","in_stock":true},{"title":"2.8L (77.7 mm stroke) \/ Standard journal","offer_id":53972353843493,"sku":"NIT-CNK-RB26S777","price":6180.0,"currency_code":"AUD","in_stock":true},{"title":"2.8L (77.7 mm stroke) \/ Wide journal","offer_id":53972353876261,"sku":"NIT-CNK-RB26777WD","price":6830.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/4838905259.png?v=1791323600"},{"product_id":"nitto-oil-pump-nissan-rb25det-rb26dett-rb30-skyline-skyline-gt-r-r31-r34-stagea-wc34-commodore-vl","title":"Nitto Oil Pump - Nissan RB25DET \/ RB26DETT \/ RB30 - Skyline \/ Skyline GT-R (R31–R34) \/ Stagea (WC34) \/ Commodore (VL)","description":"\u003ch2\u003eNitto Oil Pump - Nissan RB25DET \/ RB26DETT \/ RB30 - Skyline \/ Skyline GT-R (R31–R34) \/ Stagea (WC34) \/ Commodore (VL)\u003c\/h2\u003e\u003cp\u003eNitto's answer to the RB engine's weak factory oil pump, built around a gravity-cast housing with oversize EN26 gears and a 7075 billet backing plate. It suits Nissan RB engines from mild rebuilds to drag and street cars well past 1000 hp, and every pump is hand assembled and tested in house.\u003c\/p\u003e\u003cp\u003eChoose the drive. The Flat Drive pump suits the conventional flat collar, and Nitto strongly recommends its extended Flat Drive crank collar. The Sine Drive pump uses Nitto's own 11-tooth sine-wave drive, developed to cope with anti-lag, two-step and hard acceleration and braking, and it requires the Nitto Sine Drive collar. Collars are sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Installation by a professional is recommended. Engine internals must be measured and set up by a qualified engine builder.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGravity-cast aluminium housing\u003c\/li\u003e\n\u003cli\u003eLarger-than-standard EN26 billet steel inner and outer gears\u003c\/li\u003e\n\u003cli\u003eRedesigned internal galleries for more oil flow and pressure\u003c\/li\u003e\n\u003cli\u003e7075 billet aluminium backing plate\u003c\/li\u003e\n\u003cli\u003eFlat Drive or Nitto Sine Drive (11-tooth) options\u003c\/li\u003e\n\u003cli\u003eHand assembled and tested in house\u003c\/li\u003e\n\u003cli\u003eSupplied with gasket and front seal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eNitto parts are made for racing and off-road use. Check every part during assembly and blueprinting, and contact us before fitting if anything measures out of tolerance. Nitto will repair or replace a defective part at its option, and any modification voids the warranty. Full terms: \u003ca href=\"https:\/\/irp.cdn-website.com\/3120b340\/files\/uploaded\/Limited_Warranty_250724.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNitto limited warranty (PDF)\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-crank-collar-nissan-rb25det-rb26dett-rb30-skyline-skyline-gt-r-r31-r34-stagea-wc34-commodore-vl\"\u003eNitto Crank Collar - Nissan RB25DET \/ RB26DETT \/ RB30 - Skyline \/ Skyline GT-R (R31–R34) \/ Stagea (WC34) \/ Commodore (VL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-billet-externally-adjustable-oil-pump-nissan-rb25det-rb26dett-rb30-skyline-skyline-gt-r-r31-r34-stagea-wc34-commodore-vl\"\u003eNitto Billet Externally Adjustable Oil Pump - Nissan RB25DET \/ RB26DETT \/ RB30 - Skyline \/ Skyline GT-R (R31–R34) \/ Stagea (WC34) \/ Commodore (VL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-oil-pump-external-feed-fitting-nissan-rb25det-rb26dett-rb30-skyline-skyline-gt-r-r31-r34-stagea-wc34-commodore-vl\"\u003eNitto Oil Pump External Feed Fitting - Nissan RB25DET \/ RB26DETT \/ RB30 - Skyline \/ Skyline GT-R (R31–R34) \/ Stagea (WC34) \/ Commodore (VL)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-oil-gallery-restrictor-nissan-rb25det-rb26dett-rb30-skyline-skyline-gt-r-r31-r34-stagea-wc34-commodore-vl\"\u003eNitto Oil Gallery Restrictor - Nissan RB25DET \/ RB26DETT \/ RB30 - Skyline \/ Skyline GT-R (R31–R34) \/ Stagea (WC34) \/ Commodore (VL)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"chicane-links\"\u003eShop more: \u003ca href=\"\/collections\/nitto\"\u003eNitto\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eNeed help choosing parts? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Nitto","offers":[{"title":"Flat drive","offer_id":53972356268325,"sku":"NIT-OIL-RB26","price":1699.0,"currency_code":"AUD","in_stock":true},{"title":"Sine drive","offer_id":53972356301093,"sku":"NIT-OIL-RB26SINE","price":1845.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/4839197384.png?v=1791323616"},{"product_id":"nitto-i-beam-connecting-rods-nissan-rb25det-rb26dett-skyline-skyline-gt-r-r32-r33-r34-stagea-wc34","title":"Nitto I-Beam Connecting Rods - Nissan RB25DET \/ RB26DETT - Skyline \/ Skyline GT-R (R32 \/ R33 \/ R34) \/ Stagea (WC34)","description":"\u003ch2\u003eNitto I-Beam Connecting Rods - Nissan RB25DET \/ RB26DETT - Skyline \/ Skyline GT-R (R32 \/ R33 \/ R34) \/ Stagea (WC34)\u003c\/h2\u003e\u003cp\u003eA set of six forged 4340 I-beam connecting rods for the Nissan RB25DET and RB26DETT in R32 to R34 Skylines and the Stagea. They are aimed at builds that go past intermediate power levels, where you want a tough, proven rod without the cost of Nitto's flagship V2.\u003c\/p\u003e\u003cp\u003eOne specification: 121.5 mm centre-to-centre with 3\/8\" ARP 2000 rod bolts. ARP Custom Age 625+ bolts are available as an upgrade.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Installation by a professional is recommended. Engine internals must be measured and set up by a qualified engine builder.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDouble-melted 4340 billet steel, one-piece forging, X-ray and sonic grade tested\u003c\/li\u003e\n\u003cli\u003eQuenched, heat treated and shot peened (38 HRC)\u003c\/li\u003e\n\u003cli\u003eQuality ARP 2000 rod bolts (3\/8\")\u003c\/li\u003e\n\u003cli\u003eSilicon bronze pin end bushes\u003c\/li\u003e\n\u003cli\u003eDoweled cap for accurate alignment\u003c\/li\u003e\n\u003cli\u003eBalanced to within ±1 g per set, bores sized to ±0.0001\" on Sunnen honing equipment\u003c\/li\u003e\n\u003cli\u003e100% CNC profiled, drilled and tapped\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWarranty\u003c\/h3\u003e\u003cp\u003eNitto parts are made for racing and off-road use. Check every part during assembly and blueprinting, and contact us before fitting if anything measures out of tolerance. Nitto will repair or replace a defective part at its option, and any modification voids the warranty. Full terms: \u003ca href=\"https:\/\/irp.cdn-website.com\/3120b340\/files\/uploaded\/Limited_Warranty_250724.pdf\" target=\"_blank\" rel=\"noopener\"\u003eNitto limited warranty (PDF)\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-v2-i-beam-connecting-rods-nissan-rb25det-rb26dett-skyline-skyline-gt-r-r32-r33-r34-stagea-wc34\"\u003eNitto V2 I-Beam Connecting Rods - Nissan RB25DET \/ RB26DETT - Skyline \/ Skyline GT-R (R32 \/ R33 \/ R34) \/ Stagea (WC34)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-forged-pistons-nissan-rb26dett-skyline-gt-r-r32-r33-r34\"\u003eNitto Forged Pistons - Nissan RB26DETT - Skyline GT-R (R32 \/ R33 \/ R34)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-forged-stroker-pistons-nissan-rb26dett-skyline-gt-r-r32-r33-r34\"\u003eNitto Forged Stroker Pistons - Nissan RB26DETT - Skyline GT-R (R32 \/ R33 \/ R34)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/nitto-billet-crankshaft-nissan-rb26dett-skyline-gt-r-r32-r33-r34\"\u003eNitto Billet Crankshaft - Nissan RB26DETT - Skyline GT-R (R32 \/ R33 \/ R34)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"chicane-links\"\u003eShop more: \u003ca href=\"\/collections\/nitto\"\u003eNitto\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eNeed help choosing parts? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Nitto","offers":[{"title":"Default Title","offer_id":53972357775653,"sku":"NIT-ROD-RB26I","price":1670.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/4838779190.png?v=1791323627"}],"url":"https:\/\/www.chicaneaustralia.com.au\/collections\/nissan-skyline-gtr-r32.oembed?page=2","provider":"Chicane Australia","version":"1.0","type":"link"}