{"title":"Mishimoto","description":"\u003ch2\u003eMishimoto Cooling \u0026amp; Oil Cooler Parts\u003c\/h2\u003e\n\u003cp\u003eWe sell Mishimoto coolers and hoses into a lot of the cars that come through Chicane, from WRXs doing school-run duty around Sydney to GR86s and Evos that see regular track days at Wakefield Park or The Bend. This hub covers the full range: oil cooler kits for WRX and STI, thermostatic oil coolers for BRZ and 86, silicone hose kits, GR Corolla intercoolers, radiator hose kits and even tow hooks. The gear holds up under real heat cycling, not just a dyno pull, which is why it's one of the cooling brands we reach for first when a factory setup is starting to show its limits.\u003c\/p\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eShop by Vehicle\u003c\/summary\u003e\n\u003cp\u003eMishimoto cooling parts in this range suit Subaru WRX and STI (including oil cooler kits and silicone hose kits for the VA and VB chassis), Toyota GR86 and 86 and Subaru BRZ (thermostatic oil coolers and tow hooks), Toyota GR Corolla (intercooler kits), and Mitsubishi Lancer Evolution X (BOV return hoses). Fitment varies by generation and engine code, so check the specific kit description against your build before ordering.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eShop by Product Type\u003c\/summary\u003e\n\u003cul\u003e\n\u003cli\u003eOil coolers and oil cooler kits (standard and thermostatic)\u003c\/li\u003e\n\u003cli\u003eIntercooler kits (front mount and top mount)\u003c\/li\u003e\n\u003cli\u003eSilicone hose kits (radiator, coolant, BOV return)\u003c\/li\u003e\n\u003cli\u003eExpansion tanks and overflow tanks\u003c\/li\u003e\n\u003cli\u003eRadiators and radiator hose kits\u003c\/li\u003e\n\u003cli\u003eTow hooks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eWhy Mishimoto\u003c\/summary\u003e\n\u003cp\u003eMishimoto builds specifically for the platforms we sell into, not generic universal kits with a lot of guesswork in the install. A Mishimoto oil cooler on a WRX or an oil cooler kit on an STI is there to keep oil temps in check once you're doing more than commuting, whether that's a spirited weekend drive or a full day on track. The thermostatic oil cooler option for BRZ and 86 only brings the cooler online once the oil's up to temp, so you're not overcooling on a cold morning drive. We've sold plenty of their silicone hose kits to daily-driven WRXs where the factory rubber was starting to perish, and the difference in reliability over a few Australian summers is real. On the GR Corolla side, the intercooler kit is one of the first upgrades we recommend once a car's making more boost than the factory core was designed for.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eFitment \u0026amp; Installation\u003c\/summary\u003e\n\u003cp\u003eMost Mishimoto kits are designed as direct bolt-on replacements, but some intercooler kits and oil cooler kits need minor trimming of factory bumper supports or brackets depending on your model year. AU-delivered cars are generally covered in the kit descriptions, but if you're running a JDM import or a variant with different bumper supports, double check clearances before you order. Radiator hose kits and expansion tanks are usually the easiest install in the range and a good starting point if you're new to fitting your own cooling gear. Tow hooks for BRZ, 86 and GR86 are a straight bolt-in and one of the quickest jobs on this page. The BOV return hose for Evo X is a simple swap but worth checking against your factory routing before you order, especially if you've already got aftermarket piping.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003ePair with the rest of your build\u003c\/summary\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.chicaneaustralia.com.au\/collections\/dixcel-subaru-wrx-sti\"\u003eDIXCEL brake pads and rotors for WRX\/STI\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.chicaneaustralia.com.au\/collections\/dixcel-toyota-gr86-brz\"\u003eDIXCEL brake pads and rotors for GR86\/BRZ\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.chicaneaustralia.com.au\/collections\/korsh\"\u003eKORSH exhaust and performance parts\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eTOMEI engine and exhaust components\u003c\/li\u003e\n\u003cli\u003eRadium fuel and catch can systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003eFAQ\u003c\/summary\u003e\n\u003cp\u003e\u003cstrong\u003eWill a Mishimoto oil cooler kit fit my WRX or STI without tuning changes?\u003c\/strong\u003e\u003cbr\u003e\nMost oil cooler kits are a straightforward addition and don't require a retune. Intercooler upgrades that significantly change airflow can benefit from a tune, so check with us if you're unsure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between the standard and thermostatic oil cooler for BRZ\/86?\u003c\/strong\u003e\u003cbr\u003e\nThe thermostatic version only routes oil through the cooler once it's reached operating temperature, so the engine warms up normally on cold starts. The standard cooler runs oil through it all the time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo these kits suit street cars or only track builds?\u003c\/strong\u003e\u003cbr\u003e\nBoth. A lot of our customers run these on daily-driven cars purely for reliability and heat management, not just outright track performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I fit a Mishimoto intercooler kit or silicone hose kit myself?\u003c\/strong\u003e\u003cbr\u003e\nMost kits are DIY-friendly with basic hand tools, though some intercooler kits involve bumper removal. If you're not confident, we can point you to a workshop that's fitted these before.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes Mishimoto cooling gear come with a warranty?\u003c\/strong\u003e\u003cbr\u003e\nYes, Mishimoto covers its products under manufacturer warranty. Reach out to us if you need help with a claim.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cp\u003eContact us if you need help matching a Mishimoto cooling kit to your exact model and year.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"CollectionPage\",\n  \"name\": \"Mishimoto Cooling \u0026 Oil Cooler Parts\",\n  \"url\": \"https:\/\/www.chicaneaustralia.com.au\/collections\/mishimoto\",\n  \"isPartOf\": {\n    \"@type\": \"WebSite\",\n    \"name\": \"Chicane Australia\",\n    \"url\": \"https:\/\/www.chicaneaustralia.com.au\"\n  }\n}\n\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"BreadcrumbList\",\n  \"itemListElement\": [\n    {\n      \"@type\": \"ListItem\",\n      \"position\": 1,\n      \"name\": \"Home\",\n      \"item\": \"https:\/\/www.chicaneaustralia.com.au\"\n    },\n    {\n      \"@type\": \"ListItem\",\n      \"position\": 2,\n      \"name\": \"Brands\",\n      \"item\": \"https:\/\/www.chicaneaustralia.com.au\/collections\"\n    },\n    {\n      \"@type\": \"ListItem\",\n      \"position\": 3,\n      \"name\": \"Mishimoto\",\n      \"item\": \"https:\/\/www.chicaneaustralia.com.au\/collections\/mishimoto\"\n    }\n  ]\n}\n\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"Brand\",\n  \"name\": \"Mishimoto\",\n  \"url\": \"https:\/\/www.mishimoto.com\",\n  \"sameAs\": \"https:\/\/www.mishimoto.com\",\n  \"description\": \"Mishimoto is a US-based performance cooling brand known for oil coolers, intercooler kits, silicone hoses and expansion tanks for Subaru, Toyota and Mitsubishi platforms.\"\n}\n\u003c\/script\u003e","products":[{"product_id":"mishimoto-silicone-bov-return-hose-mitsubishi-lancer-evolution-x-cz4a-black","title":"Mishimoto Silicone BOV Return Hose - Mitsubishi Lancer Evolution X (CZ4A) - Black","description":"\u003ch2\u003eMishimoto Silicone BOV Return Hose - Mitsubishi Lancer Evolution X (CZ4A) - Black\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto's silicone BOV return hose is a direct OEM replacement designed to outperform and outlast the factory rubber hose on the \u003cstrong\u003eMitsubishi Lancer Evolution X\u003c\/strong\u003e. Built from high grade silicone with heat resistant embedded fibres, this hose handles higher temperatures and pressure loads than the stock unit, making it a smart upgrade for any turbocharged EVO X build.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eMitsubishi Lancer Evolution X (CZ4A)\u003c\/strong\u003e platform, including the \u003cstrong\u003eEvolution GSR\u003c\/strong\u003e, \u003cstrong\u003eEvolution MR\u003c\/strong\u003e, \u003cstrong\u003eEvolution MR Touring\u003c\/strong\u003e, \u003cstrong\u003eEvolution SE\u003c\/strong\u003e, \u003cstrong\u003eEvolution RS\u003c\/strong\u003e, \u003cstrong\u003eEvolution Final Edition\u003c\/strong\u003e, \u003cstrong\u003eLancer Ralliart\u003c\/strong\u003e, \u003cstrong\u003eLancer Ralliart Sportback\u003c\/strong\u003e, and \u003cstrong\u003eLancer BASE\u003c\/strong\u003e models produced from \u003cstrong\u003e2008 to 2015\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eColour: Black\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement fit for 2008–2015 Mitsubishi Lancer Evolution X (CZ4A)\u003c\/li\u003e\n\u003cli\u003eMaximum operating temperature: 166°C (330°F)\u003c\/li\u003e\n\u003cli\u003eConstructed from high grade silicone with heat resistant embedded fibres\u003c\/li\u003e\n\u003cli\u003eImproved heat dissipation over factory rubber hose\u003c\/li\u003e\n\u003cli\u003eIncreased pressure tolerance\u003c\/li\u003e\n\u003cli\u003eBacked by Mishimoto's Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, fitment notes, and variant details are provided in the tabs above. Please confirm your vehicle's year, trim level, and configuration before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this hose suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":52426310746405,"sku":"MMHOSE-EVO-XBOVBK","price":332.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMHOSE-EVO-XBOVBK.webp?v=1779686949"},{"product_id":"mishimoto-intercooler-pipe-kit-toyota-gr-corolla-gzea14h-4-core","title":"Mishimoto Intercooler \u0026 Pipe Kit - Toyota GR Corolla (GZEA14H) - 4\" Core","description":"\u003ch2\u003eMishimoto Intercooler \u0026amp; Pipe Kit - Toyota GR Corolla (GZEA14H) - 4\" Core\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto builds performance cooling solutions for enthusiasts who want real results, not just box ticks. This intercooler and pipe kit is a complete bolt-on upgrade for the \u003cstrong\u003eToyota GR Corolla\u003c\/strong\u003e, designed to drop intake temperatures, free up power, and handle the heat of track days and spirited street driving without compromise.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the Mishimoto intercooler and pipe kit (SKU: MMINT-GRC-23KBKBK) for the \u003cstrong\u003e2023+ Toyota GR Corolla\u003c\/strong\u003e (\u003cstrong\u003eGZEA14H\u003c\/strong\u003e). Supplied with a black powder-coated intercooler, black piping, and black couplers.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e4\" thick bar-and-plate core — 52% increase in core volume over the factory unit\u003c\/li\u003e\n  \u003cli\u003eCast throttle body elbow connection for improved airflow and throttle response\u003c\/li\u003e\n  \u003cli\u003eCNC-machined inlet and outlet for smooth, unrestricted airflow entry\u003c\/li\u003e\n  \u003cli\u003eRobust cast-aluminium end tanks for long-term reliability under boost\u003c\/li\u003e\n  \u003cli\u003eAnodised aluminium ducting directs airflow through the external fins for maximum cooling efficiency\u003c\/li\u003e\n  \u003cli\u003eDurable powder-coated finish throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKit Contents\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Intercooler\u003c\/li\u003e\n  \u003cli\u003e1 x Intercooler adapter set\u003c\/li\u003e\n  \u003cli\u003e1 x Intercooler adapter retainer set\u003c\/li\u003e\n  \u003cli\u003e1 x Intercooler ducting set\u003c\/li\u003e\n  \u003cli\u003e1 x Intercooler piping and coupler kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, fitment notes, and configuration details are provided in the tabs above. Please confirm your vehicle's year, trim level, and build before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this kit suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Black \/ Black","offer_id":52492653330725,"sku":"MMINT-GRC-23KBKBK","price":2899.0,"currency_code":"AUD","in_stock":true},{"title":"Black \/ Red","offer_id":52492653363493,"sku":"MMINT-GRC-23KBKRD","price":2899.0,"currency_code":"AUD","in_stock":true},{"title":"Silver \/ Black","offer_id":52492653396261,"sku":"MMINT-GRC-23KSLBK","price":2899.0,"currency_code":"AUD","in_stock":true},{"title":"Silver \/ Red","offer_id":52492653429029,"sku":"MMINT-GRC-23KSLRD","price":2899.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMINT-GRC-23KSLRD_1_1.webp?v=1780208479"},{"product_id":"mishimoto-silicone-coolant-hose-kit-subaru-wrx-vb","title":"Mishimoto Silicone Coolant Hose Kit - Subaru WRX (VB)","description":"\u003ch2\u003eMishimoto Silicone Coolant Hose Kit - Subaru WRX (VB)\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto has built its name on cooling system components that outlast and outperform factory rubber, and this hose kit is no exception. Designed specifically for the \u003cstrong\u003eSubaru WRX (VB)\u003c\/strong\u003e, it replaces the factory rubber coolant hoses with reinforced silicone construction that resists heat, pressure and age related cracking far better than stock.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eSubaru WRX (VB)\u003c\/strong\u003e chassis and includes all hose clamps needed for a complete, hassle free installation. The kit is available in Black, Blue, Neon Yellow and Red silicone, so use the variant selector on this listing to choose the colour that suits your engine bay.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReinforced silicone construction for improved heat and pressure resistance over rubber hoses\u003c\/li\u003e\n\u003cli\u003eReduces risk of leaks, tears and age related degradation\u003c\/li\u003e\n\u003cli\u003eIncludes all necessary hose clamps for installation\u003c\/li\u003e\n\u003cli\u003eAvailable in Black, Blue, Neon Yellow or Red\u003c\/li\u003e\n\u003cli\u003eCovered by the Mishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers and fitment notes are provided in the tabs above. Please confirm your WRX's build date and configuration before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this kit suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Black","offer_id":53000200913189,"sku":"MMHOSE-WRX-22BK","price":279.95,"currency_code":"AUD","in_stock":true},{"title":"Blue","offer_id":53000200945957,"sku":"MMHOSE-WRX-22BL","price":279.95,"currency_code":"AUD","in_stock":true},{"title":"Neon Yellow","offer_id":53000200978725,"sku":"MMHOSE-WRX-22NY","price":299.95,"currency_code":"AUD","in_stock":true},{"title":"Red","offer_id":53000201011493,"sku":"MMHOSE-WRX-22RD","price":279.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMHOSE-WRX-22BK_1.jpg?v=1785902473"},{"product_id":"mishimoto-silicone-radiator-hose-kit-subaru-wrx-va","title":"Mishimoto Silicone Radiator Hose Kit - Subaru WRX (VA)","description":"\u003ch2\u003eMishimoto Silicone Radiator Hose Kit - Subaru WRX (VA)\u003c\/h2\u003e\n\n\u003cp\u003eStock rubber hoses degrade over time, hardening and cracking under heat and pressure. Mishimoto's Silicone Radiator Hose Kit gives your \u003cstrong\u003eSubaru WRX (VA)\u003c\/strong\u003e a durable upgrade, built from four layer silicone construction with heat resistant embedded fibres for far greater temperature and pressure tolerance than the factory items.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eSubaru WRX (VA)\u003c\/strong\u003e, built for the 2015 model year chassis. The kit is available in Black, Blue, Neon Yellow, and Red, so pick your preferred colour from the variant selector on this listing page.\u003c\/p\u003e\n\n\u003ch3\u003eKit Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUpper radiator hose\u003c\/li\u003e\n\u003cli\u003eLower radiator hose\u003c\/li\u003e\n\u003cli\u003eOverflow port hose\u003c\/li\u003e\n\u003cli\u003eFour worm gear clamps\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFour ply silicone construction with embedded fibre reinforcement\u003c\/li\u003e\n\u003cli\u003eImproved heat and pressure tolerance over stock rubber hoses\u003c\/li\u003e\n\u003cli\u003eSuited to track days, rallycross, and daily driven WRX builds\u003c\/li\u003e\n\u003cli\u003eBacked by the Mishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers, and fitment notes are provided in the tabs above. Please confirm your WRX's model year and configuration before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this kit suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Black","offer_id":53000203764005,"sku":"MMHOSE-WRX-15BK","price":279.95,"currency_code":"AUD","in_stock":true},{"title":"Blue","offer_id":53000203796773,"sku":"MMHOSE-WRX-15BL","price":279.95,"currency_code":"AUD","in_stock":true},{"title":"Neon Yellow","offer_id":53000203829541,"sku":"MMHOSE-WRX-15NY","price":279.95,"currency_code":"AUD","in_stock":true},{"title":"Red","offer_id":53000203862309,"sku":"MMHOSE-WRX-15RD","price":269.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMHOSE-WRX-15BK_1.jpg?v=1785902518"},{"product_id":"mishimoto-silicone-radiator-hose-kit-subaru-wrx-sti-gd-gdb","title":"Mishimoto Silicone Radiator Hose Kit - Subaru WRX\/STI (GD\/GDB)","description":"\u003ch2\u003eMishimoto Silicone Radiator Hose Kit - Subaru WRX\/STI (GD\/GDB)\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto builds its silicone hose kits with a dual layer construction, combining high grade silicone with heat resistant embedded fibres to handle higher coolant temperatures and pressure than the factory rubber hoses. This kit is a direct fit upgrade for the \u003cstrong\u003eSubaru WRX\u003c\/strong\u003e and \u003cstrong\u003eWRX STI\u003c\/strong\u003e, giving your cooling system extra durability without changing the OEM hose routing.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eSubaru WRX\u003c\/strong\u003e and \u003cstrong\u003eWRX STI\u003c\/strong\u003e (\u003cstrong\u003eGD\/GDB\u003c\/strong\u003e) chassis. The kit is available in Black, Blue, Matte Black and Red colour options, selectable from the variant dropdown on this listing page.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e due to the engine bay layout on the GD\/GDB, minor trimming of the hoses may be required for a clean fit. Follow the installed reference image for correct upper radiator hose orientation to avoid damaging the silicone hose.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDual layer silicone and embedded fibre construction\u003c\/li\u003e\n\u003cli\u003eImproved heat resistance and pressure tolerance over OEM rubber hoses\u003c\/li\u003e\n\u003cli\u003eOEM replacement fitment\u003c\/li\u003e\n\u003cli\u003eInstall difficulty rated 2 (low)\u003c\/li\u003e\n\u003cli\u003eAvailable in four colour finishes\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers, and fitment notes are provided in the tabs above. Please ensure your vehicle's year, trim level, and configuration are confirmed before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this kit suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Black","offer_id":53000204321061,"sku":"MMHOSE-WRX-01BK","price":269.95,"currency_code":"AUD","in_stock":true},{"title":"Blue","offer_id":53000204353829,"sku":"MMHOSE-WRX-01BL","price":269.95,"currency_code":"AUD","in_stock":true},{"title":"Matte Black","offer_id":53000204386597,"sku":"MMHOSE-WRX-01MBK","price":329.95,"currency_code":"AUD","in_stock":true},{"title":"Red","offer_id":53000204419365,"sku":"MMHOSE-WRX-01RD","price":269.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMHOSE-WRX-01BK_1.jpg?v=1785902552"},{"product_id":"mishimoto-silicone-airbox-hose-subaru-wrx-va-1","title":"Mishimoto Silicone Airbox Hose - Subaru WRX (VA)","description":"\u003ch2\u003eMishimoto Silicone Airbox Hose - Subaru WRX (VA)\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto builds its intake hardware to outlast and outperform factory rubber, and this airbox hose kit is no exception. Designed as a direct bolt-on upgrade for the \u003cstrong\u003eSubaru WRX\u003c\/strong\u003e, it swaps out the factory rubber sections for four-layer silicone construction with embedded heat-resistant fibres, giving you better durability and airflow without any modification.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eSubaru WRX (VA)\u003c\/strong\u003e, 2015 onward. The kit includes both the upper and lower airbox hoses and is available in black, blue, and red — select your preferred colour from the variant options on this listing page.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e100 percent silicone construction, four-layer design with embedded fibres\u003c\/li\u003e\n\u003cli\u003eSmooth internal bore for improved airflow versus accordion-style factory hoses\u003c\/li\u003e\n\u003cli\u003eResists degradation from PCV oil particle exposure\u003c\/li\u003e\n\u003cli\u003eIncludes upper and lower airbox hoses\u003c\/li\u003e\n\u003cli\u003eBacked by Mishimoto's Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers, and fitment notes are provided in the tabs above. Please confirm your WRX's build year before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this kit suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":53000205926693,"sku":"MMHOSE-WRX-15ABBK","price":389.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMHOSE-WRX-15ABBK_1.jpg?v=1785902703"},{"product_id":"mishimoto-ancillary-hose-kit-subaru-wrx-va","title":"Mishimoto Ancillary Hose Kit - Subaru WRX (VA)","description":"\u003ch2\u003eMishimoto Ancillary Hose Kit - Subaru WRX (VA)\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto has built a reputation for engineering silicone cooling and induction components that outlast the factory rubber they replace, and this ancillary hose kit is a great example. Designed specifically for the \u003cstrong\u003eSubaru WRX (VA)\u003c\/strong\u003e, it targets the small PCV and coolant hoses that are prone to cracking and oil degradation over time.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003e2015+ Subaru WRX (VA)\u003c\/strong\u003e, SKU MMHOSE-WRX-15ANCBK. The kit is also available in blue and red via the variant selector on this listing page.\u003c\/p\u003e\n\n\u003ch3\u003eKit Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e13 silicone hoses covering PCV and coolant lines\u003c\/li\u003e\n\u003cli\u003eFour layer silicone construction with embedded heat resistant fibres\u003c\/li\u003e\n\u003cli\u003eDirect fit design matching factory specifications\u003c\/li\u003e\n\u003cli\u003eImproved resistance to oil particulate degradation\u003c\/li\u003e\n\u003cli\u003eMishimoto Lifetime Warranty included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers, and fitment notes are provided in the tabs above. Please ensure your vehicle's year, trim level, and configuration are confirmed before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this kit suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Black","offer_id":53000210317605,"sku":"MMHOSE-WRX-15ANCBK","price":409.95,"currency_code":"AUD","in_stock":true},{"title":"Blue","offer_id":53000210350373,"sku":"MMHOSE-WRX-15ANCBL","price":409.95,"currency_code":"AUD","in_stock":true},{"title":"Red","offer_id":53000210383141,"sku":"MMHOSE-WRX-15ANCRD","price":409.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMHOSE-WRX-15ANCBK_1.jpg?v=1785902845"},{"product_id":"mishimoto-thermostatic-oil-cooler-kit-subaru-wrx-va","title":"Mishimoto Thermostatic Oil Cooler Kit - Subaru WRX (VA)","description":"\u003ch2\u003eMishimoto Thermostatic Oil Cooler Kit - Subaru WRX (VA)\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto has built a reputation for engineering cooling solutions that keep high performance engines running at safe temperatures under sustained load. This thermostatic oil cooler kit is purpose built for the \u003cstrong\u003eSubaru WRX (VA)\u003c\/strong\u003e and its turbocharged FA20 DIT engine, replacing the factory liquid-to-liquid setup with a dedicated air-to-oil system that copes far better with track and spirited driving.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eSubaru WRX (VA)\u003c\/strong\u003e, 2015 onwards, and is available in Silver or Black cooler finishes via the variant selector on this listing page.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e19-row aluminium oil cooler core mounted in the front bumper\u003c\/li\u003e\n\u003cli\u003eSandwich plate with rear-mounted thermostat, activating at 85°C (185°F)\u003c\/li\u003e\n\u003cli\u003ePreassembled stainless steel lines with -10AN fittings\u003c\/li\u003e\n\u003cli\u003eApplication-specific silicone bypass hose for the stock liquid-to-liquid heat exchanger\u003c\/li\u003e\n\u003cli\u003eRobust application-specific mounting brackets\u003c\/li\u003e\n\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers, and fitment notes are provided in the tabs above. Please ensure your vehicle's year, trim level, and configuration are confirmed before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this kit suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Silver","offer_id":53000220573989,"sku":"MMOC-WRX-15T","price":1699.95,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":53000220606757,"sku":"MMOC-WRX-15TBK","price":1699.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMOC-WRX-15T_1_e1e93aca-8f24-4bc0-ad73-0afa8c7f1260.jpg?v=1785903593"},{"product_id":"mishimoto-thermostatic-oil-cooler-kit-subaru-wrx-gr-gh-va","title":"Mishimoto Thermostatic Oil Cooler Kit - Subaru WRX (GR\/GH\/VA)","description":"\u003ch2\u003eMishimoto Thermostatic Oil Cooler Kit - Subaru WRX (GR\/GH\/VA)\u003c\/h2\u003e\n\n\u003cp\u003eTurbocharged flat fours run hot, and the \u003cstrong\u003eSubaru WRX never came with a factory oil cooler to help manage it. Mishimoto built this direct fit kit specifically to keep oil temperatures in check, backed by their lifetime warranty and years of experience engineering cooling solutions for high performance and track focused vehicles.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eSubaru WRX (GR\/GH\/VA)\u003c\/strong\u003e from 2008 onward, sedan and hatch. The kit is available in silver or black cooler finish, selectable via the variant options on this listing, and comes fitted with a thermostatic sandwich plate for tighter control over oil temperature regulation.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e All fittings and banjo bolts must be torqued correctly during install and rechecked after the first few kilometres of driving to ensure no leaks develop.\u003c\/p\u003e\n\n\u003ch3\u003eKit Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e19-row oil cooler with application specific mounting brackets\u003c\/li\u003e\n\u003cli\u003eCNC-machined aluminium spacer, compatible with factory exhaust manifold heat shields\u003c\/li\u003e\n\u003cli\u003ePreassembled stainless steel lines with -10AN fittings\u003c\/li\u003e\n\u003cli\u003eThermal reflective wrap to deflect radiant heat from the exhaust\u003c\/li\u003e\n\u003cli\u003eThermostatic oil sandwich plate\u003c\/li\u003e\n\u003cli\u003eMishimoto lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReduces oil temperature by up to 33°C (60°F) with minimal pressure loss\u003c\/li\u003e\n\u003cli\u003eInstall difficulty rated 3\u003c\/li\u003e\n\u003cli\u003eRecommended torque for straight fittings and banjo bolts: 20-34 Nm (15-25 lb-ft), max 47 Nm (35 lb-ft)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers, and fitment notes are provided in the tabs above. Please confirm your WRX's model year and configuration before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this kit suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Silver","offer_id":53000220639525,"sku":"MMOC-WRX-08T","price":1339.95,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":53000220672293,"sku":"MMOC-WRX-08TBK","price":1339.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMOC-WRX-08T_1.jpg?v=1785903603"},{"product_id":"mishimoto-thermostatic-oil-cooler-kit-subaru-wrx-gdb-my06-07","title":"Mishimoto Thermostatic Oil Cooler Kit - Subaru WRX (GDB) MY06-07","description":"\u003ch2\u003eMishimoto Thermostatic Oil Cooler Kit - Subaru WRX (GDB) MY06-07\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto has built a reputation for engineering cooling solutions that keep high performance engines in their optimal temperature window, and this thermostatic oil cooler kit is no exception. Designed specifically for the \u003cstrong\u003eSubaru WRX\u003c\/strong\u003e Hawkeye, it gives owners a reliable way to manage oil temperatures under hard street or track use, helping protect against oil breakdown and long term engine wear.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eSubaru WRX\u003c\/strong\u003e \u003cstrong\u003eGDB\u003c\/strong\u003e MY06-07, fitting both automatic and manual applications. The kit is available in silver or black cooler finish — select your preferred option from the variant selector on this listing.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This kit will not fit vehicles equipped with a front mount intercooler. Please inspect your oil filter housing for compatibility before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLarge 19-row oil cooler core mounted behind the front bumper and grille for maximum airflow\u003c\/li\u003e\n\u003cli\u003eThermostatic sandwich plate for additional oil temperature regulation\u003c\/li\u003e\n\u003cli\u003eAdds approximately 615 mL (0.65 qt) to total oil capacity\u003c\/li\u003e\n\u003cli\u003eRecommended torque for straight fittings and banjo bolts: 20-34 Nm (15-25 lb-ft), max 47 Nm (35 ft-lb)\u003c\/li\u003e\n\u003cli\u003eMishimoto lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers, and fitment notes are provided in the tabs above. Please confirm your vehicle's build date and configuration before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this kit suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Silver","offer_id":53000220705061,"sku":"MMOC-WRX-06T","price":1199.95,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":53000220737829,"sku":"MMOC-WRX-06TBK","price":1199.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMOC-WRX-06T_1.jpg?v=1785903610"},{"product_id":"mishimoto-thermostatic-oil-cooler-kit-subaru-wrx-vb","title":"Mishimoto Thermostatic Oil Cooler Kit - Subaru WRX (VB)","description":"\u003ch2\u003eMishimoto Thermostatic Oil Cooler Kit - Subaru WRX (VB)\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto builds cooling components with a focus on real world durability, and this thermostatic oil cooler kit is designed to keep the \u003cstrong\u003eSubaru WRX\u003c\/strong\u003e's FA24 turbocharged engine running at safer oil temperatures under load. The factory liquid-to-liquid cooler is compact and struggles once you start pushing the car on track or with added power, so this kit gives the oil system genuine extra capacity and airflow-based cooling.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003e2022+ Subaru WRX (VB)\u003c\/strong\u003e and is available in black or silver finish, selectable via the variant options on this listing page.\u003c\/p\u003e\n\n\u003ch3\u003eKit Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e19-row aluminium oil cooler core\u003c\/li\u003e\n\u003cli\u003eApplication-specific mounting brackets for front bumper fitment\u003c\/li\u003e\n\u003cli\u003ePre-assembled black nylon-covered stainless steel lines with -10AN fittings\u003c\/li\u003e\n\u003cli\u003eThermostatic sandwich plate\u003c\/li\u003e\n\u003cli\u003eAdds approximately 710 mL (0.75 qt) of oil capacity\u003c\/li\u003e\n\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCooler type: 19-row liquid-to-air, works alongside factory liquid-to-liquid cooler\u003c\/li\u003e\n\u003cli\u003eFittings: -10AN\u003c\/li\u003e\n\u003cli\u003eDyno-tested reduction in oil temperature of approximately 11°C (20°F) \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers, and fitment notes are provided in the tabs above. Please ensure your vehicle's year, trim level, and configuration are confirmed before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this kit suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Black","offer_id":53000220836133,"sku":"MMOC-WRX-22TBK","price":1679.95,"currency_code":"AUD","in_stock":true},{"title":"Silver","offer_id":53000220868901,"sku":"MMOC-WRX-22TSL","price":1679.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMOC-WRX-22TBK_01.jpg?v=1785903621"},{"product_id":"mishimoto-thermostatic-oil-cooler-kit-subaru-wrx-sti-gd-gg","title":"Mishimoto Thermostatic Oil Cooler Kit - Subaru WRX\/STI (GD\/GG)","description":"\u003ch2\u003eMishimoto Thermostatic Oil Cooler Kit - Subaru WRX\/STI (GD\/GG)\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto builds application specific cooling hardware engineered to keep oil temperatures under control without compromising factory fitment or long term reliability. This direct fit kit is designed to give your \u003cstrong\u003eSubaru WRX\u003c\/strong\u003e or \u003cstrong\u003eSTI\u003c\/strong\u003e the extra thermal headroom needed for spirited driving, track days, or daily rally-style abuse.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eSubaru WRX\u003c\/strong\u003e and \u003cstrong\u003eSTI\u003c\/strong\u003e (\u003cstrong\u003eGD\u003c\/strong\u003e\/\u003cstrong\u003eGG\u003c\/strong\u003e chassis), suiting both automatic and manual applications. The kit is available in Sleek Silver or Stealth Black cooler finishes, and with either the standard oil sandwich plate or the rear-mounted thermostat sandwich plate for finer temperature control - select your preferred combination from the variant options on this listing.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Installation requires trimming of the factory exhaust heat shield. This kit is not compatible with vehicles fitted with a front mount intercooler.\u003c\/p\u003e\n\n\u003ch3\u003eKit Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eApplication specific mounting brackets\u003c\/li\u003e\n\u003cli\u003ePremade stainless steel braided oil lines\u003c\/li\u003e\n\u003cli\u003eBillet oil sandwich plate (standard or rear-mounted thermostat option)\u003c\/li\u003e\n\u003cli\u003e10-row stacked plate Mishimoto oil cooler\u003c\/li\u003e\n\u003cli\u003eAll necessary installation hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdds approximately 0.47 L of additional oil capacity\u003c\/li\u003e\n\u003cli\u003eReduces oil temperatures by more than 11°C (20°F) with minimal pressure loss\u003c\/li\u003e\n\u003cli\u003eRecommended torque for straight fittings and banjo bolts: 20-34 Nm (15-25 lb-ft)\u003c\/li\u003e\n\u003cli\u003eDo not exceed maximum torque rating of 47 Nm (35 ft-lb)\u003c\/li\u003e\n\u003cli\u003eBacked by the Mishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers, and fitment notes are provided in the tabs above. Please ensure your vehicle's year, trim level, and configuration are confirmed before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this kit suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Silver","offer_id":53000220967205,"sku":"MMOC-WRX-01T","price":1119.95,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":53000220999973,"sku":"MMOC-WRX-01TBK","price":1119.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMOC-WRX-01T_1-2_copy.jpg?v=1785903627"},{"product_id":"mishimoto-oil-cooler-kit-subaru-wrx-vb","title":"Mishimoto Oil Cooler Kit - Subaru WRX (VB)","description":"\u003ch2\u003eMishimoto Oil Cooler Kit - Subaru WRX (VB)\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto has built a reputation on solving the cooling weak points that factory engineering leaves behind, and the \u003cstrong\u003eSubaru WRX\u003c\/strong\u003e is no exception. The 2022+ \u003cstrong\u003eWRX\u003c\/strong\u003e relies on a compact liquid-to-liquid heat exchanger that struggles to keep oil temperatures in check under load, especially if you're modifying or tracking the car. This direct fit kit adds genuine auxiliary cooling capacity to protect the FA24 engine over the long term.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eSubaru WRX (VB)\u003c\/strong\u003e chassis from 2022 onward. The kit is available in Black or Silver core finishes, selectable via the variant options on this listing page.\u003c\/p\u003e\n\n\u003ch3\u003eKit Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e19-row oil cooler core (Black or Silver)\u003c\/li\u003e\n\u003cli\u003eApplication specific mounting brackets for front bumper installation\u003c\/li\u003e\n\u003cli\u003ePre-assembled black nylon-covered stainless steel lines with -10AN fittings\u003c\/li\u003e\n\u003cli\u003eChoice of thermostatic or non-thermostatic sandwich plate\u003c\/li\u003e\n\u003cli\u003eAdds approximately 710 mL (0.75 qt) of additional oil capacity\u003c\/li\u003e\n\u003cli\u003eMishimoto reports an approximate 11°C (20°F) reduction in oil temperature during dyno testing\u003c\/li\u003e\n\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers, and fitment notes are provided in the tabs above. Please confirm your WRX's build date and configuration before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this kit suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Black","offer_id":53000221032741,"sku":"MMOC-WRX-22BK","price":1439.95,"currency_code":"AUD","in_stock":true},{"title":"Silver","offer_id":53000221065509,"sku":"MMOC-WRX-22SL","price":1439.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMOC-WRX-22BK_01.jpg?v=1785903633"},{"product_id":"mishimoto-oil-cooler-kit-subaru-wrx-gd-my06-07-19-row","title":"Mishimoto Oil Cooler Kit - Subaru WRX (GD) MY06-07 - 19-Row","description":"\u003ch2\u003eMishimoto Oil Cooler Kit - Subaru WRX (GD) MY06-07 - 19-Row\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto builds its cooling components around one goal: keeping engine temperatures in check when the factory system starts to struggle. This direct fit oil cooler kit is designed specifically for the \u003cstrong\u003eSubaru WRX\u003c\/strong\u003e \u003cstrong\u003eHawkeye\u003c\/strong\u003e, giving high output engines a reliable way to manage oil temperature under sustained load, whether that's a track day or a long stint on the highway.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eSubaru WRX (GD)\u003c\/strong\u003e \u003cstrong\u003eMY06-07\u003c\/strong\u003e models, fitted with both automatic and manual transmissions. The kit is available in silver or black finish, selectable via the variant options on this listing page.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This kit is not compatible with vehicles fitted with a front mount intercooler. Check your oil filter housing for clearance before installation, and confirm fitment against Subaru part number 21311AA051 if unsure.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLarge 19-row oil cooler core mounted behind the front bumper and grille for maximum airflow\u003c\/li\u003e\n\u003cli\u003eAdds approximately 615 mL to total oil capacity\u003c\/li\u003e\n\u003cli\u003eOptional thermostatic sandwich plate available for finer oil temperature control\u003c\/li\u003e\n\u003cli\u003eAvailable in stealth black or silver cooler finish\u003c\/li\u003e\n\u003cli\u003eRecommended torque for straight fittings and banjo bolts: 20-34 Nm (15-25 lb-ft), do not exceed 47 Nm (35 ft-lb)\u003c\/li\u003e\n\u003cli\u003eBacked by the Mishimoto lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers, and fitment notes are provided in the tabs above. Please confirm your WRX's year, transmission type, and intercooler configuration before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this kit suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Silver","offer_id":53000221131045,"sku":"MMOC-WRX-06","price":1059.95,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":53000221163813,"sku":"MMOC-WRX-06BK","price":1059.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMOC-WRX-06_1.jpg?v=1785903640"},{"product_id":"mishimoto-oil-cooler-kit-subaru-wrx-sti-gdb","title":"Mishimoto Oil Cooler Kit - Subaru WRX\/STi (GDB)","description":"\u003ch2\u003eMishimoto Oil Cooler Kit - Subaru WRX\/STi (GDB)\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto builds cooling components with a focus on real world durability, and this oil cooler kit is designed specifically to keep oil temperatures in check on the \u003cstrong\u003eSubaru WRX\u003c\/strong\u003e and \u003cstrong\u003eSTi\u003c\/strong\u003e. It's a direct fit unit engineered to bolt into the factory grille location without major surgery.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eSubaru WRX\u003c\/strong\u003e and \u003cstrong\u003eSTi\u003c\/strong\u003e \u003cstrong\u003e(GDB)\u003c\/strong\u003e, suiting both automatic and manual applications. The kit is available in silver or stealth black cooler finishes — select your preferred option from the variant menu on this listing.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Installation requires trimming of the exhaust heat shield and is not compatible with vehicles fitted with a front mount intercooler.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect fit design, front grille mounted for optimal airflow\u003c\/li\u003e\n\u003cli\u003eReduces oil temperatures by over  degrees versus stock\u003c\/li\u003e\n\u003cli\u003eFits automatic and manual GDB applications\u003c\/li\u003e\n\u003cli\u003eApproximate install time of two hours, install difficulty rated 3\u003c\/li\u003e\n\u003cli\u003eRecommended fitting torque 20-34 Nm (15-25 lb-ft), maximum 47 Nm (35 lb-ft)\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers, and fitment notes are provided in the tabs above. Please ensure your vehicle's year, trim level, and configuration are confirmed before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this kit suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Silver","offer_id":53000221196581,"sku":"MMOC-WRX-01","price":989.95,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":53000221229349,"sku":"MMOC-WRX-01BK","price":989.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMOC-WRX-01BK.jpg?v=1785903646"},{"product_id":"mishimoto-oil-cooler-kit-subaru-wrx-va-19-row","title":"Mishimoto Oil Cooler Kit - Subaru WRX (VA) - 19-Row","description":"\u003ch2\u003eMishimoto Oil Cooler Kit - Subaru WRX (VA) - 19-Row\u003c\/h2\u003e\n\n\u003cp\u003eSustained hard driving puts serious heat into the FA20 DIT, and the factory liquid to liquid cooler can only do so much once you start tracking or tuning your car. Mishimoto built this direct fit oil cooler kit specifically for the \u003cstrong\u003eSubaru WRX (VA)\u003c\/strong\u003e to work alongside the stock cooler, pulling extra heat out of the oil and helping protect long term engine health.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eSubaru WRX (VA)\u003c\/strong\u003e, 2015 onward, fitted with the FA20 DIT engine. The kit is available in Sleek Silver or Stealth Black cooler finishes — select your preferred option from the variant selector on this listing page.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This kit supplements the factory liquid to liquid oil cooler rather than replacing it, so both coolers work together to manage oil temperature.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e19-row aluminium oil cooler mounted in the front bumper\u003c\/li\u003e\n\u003cli\u003eApplication specific mounting brackets for a direct fit\u003c\/li\u003e\n\u003cli\u003eCNC-machined aluminium sandwich plate, clears the stock oil filter\u003c\/li\u003e\n\u003cli\u003ePreassembled stainless steel lines with -10AN fittings\u003c\/li\u003e\n\u003cli\u003eReduces oil temperature by up to 13.9°C (25°F) with minimal pressure loss\u003c\/li\u003e\n\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers, and fitment notes are provided in the tabs above. Please confirm your WRX's model year and configuration before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this kit suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Silver","offer_id":53000221360421,"sku":"MMOC-WRX-15","price":1459.95,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":53000221393189,"sku":"MMOC-WRX-15BK","price":1459.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMOC-WRX-15BK_1.jpg?v=1785903653"},{"product_id":"mishimoto-oil-cooler-kit-subaru-wrx-gr-gh","title":"Mishimoto Oil Cooler Kit - Subaru WRX (GR\/GH)","description":"\u003ch2\u003eMishimoto Oil Cooler Kit - Subaru WRX (GR\/GH)\u003c\/h2\u003e\n\n\u003cp\u003eTurbocharged flat fours run hot, and Mishimoto built this direct fit oil cooler kit specifically to keep the \u003cstrong\u003eSubaru WRX\u003c\/strong\u003e in check when things heat up. Backed by Mishimoto's lifetime warranty, it's engineered for this platform rather than adapted from a universal design.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the 2008 to 2014 \u003cstrong\u003eSubaru WRX (GR\/GH)\u003c\/strong\u003e, fitted with a 19-row cooler, application specific brackets and preassembled stainless lines with -10AN fittings. Choose between silver or black cooler finish via the variant selector, with standard or thermostatic sandwich plate options also available.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Straight fittings and banjo bolts should be torqued to 20-34 Nm (15-25 lb-ft), never exceeding 47 Nm (35 lb-ft), to avoid leaks.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLarge 19-row oil cooler, silver or black finish\u003c\/li\u003e\n\u003cli\u003eCNC-machined aluminium spacer for sandwich plate clearance\u003c\/li\u003e\n\u003cli\u003ePreassembled stainless steel lines with -10AN fittings\u003c\/li\u003e\n\u003cli\u003eThermal reflective wrap to deflect exhaust heat\u003c\/li\u003e\n\u003cli\u003eStandard or thermostatic sandwich plate options\u003c\/li\u003e\n\u003cli\u003eUp to approximately 33°C (60°F) reduction in oil temperature\u003c\/li\u003e\n\u003cli\u003eLifetime Mishimoto warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers, and fitment notes are provided in the tabs above. Please confirm your WRX's year and configuration before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this kit suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Silver","offer_id":53000221491493,"sku":"MMOC-WRX-08","price":1239.95,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":53000221524261,"sku":"MMOC-WRX-08BK","price":1239.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMOC-WRX-08_1.jpg?v=1785903658"},{"product_id":"mishimoto-thermostatic-oil-cooler-kit-subaru-wrx-sti-va","title":"Mishimoto Thermostatic Oil Cooler Kit - Subaru WRX STI (VA)","description":"\u003ch2\u003eMishimoto Thermostatic Oil Cooler Kit - Subaru WRX STI (VA) MY15\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto has built its reputation on keeping engine fluids in check, and this kit brings that same focus on cooling efficiency to the \u003cstrong\u003eSubaru WRX STI\u003c\/strong\u003e. Designed specifically for the MY15 model, it pairs a large capacity cooler with a thermostatic sandwich plate to manage oil temperature without overcooling on cold starts, backed by Mishimoto's lifetime warranty.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eSubaru WRX STI\u003c\/strong\u003e \u003cstrong\u003e(VA)\u003c\/strong\u003e MY15. The cooler is available in Silver or Black finishes, selectable via the variant options on this page (SKU MMOC-STI-15T \/ MMOC-STI-15TBK).\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e this kit is designed for MY15 STI models fitted with the single scroll turbo and unequal length exhaust manifold. Vehicles with the twin scroll turbo and equal length manifold may not be compatible.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e19-row aluminium oil cooler mounted in the front bumper for optimal airflow\u003c\/li\u003e\n\u003cli\u003ePreassembled stainless steel lines with -10AN fittings\u003c\/li\u003e\n\u003cli\u003eDirect fit mounting brackets for a clean, hassle free install\u003c\/li\u003e\n\u003cli\u003eThermostatic oil sandwich plate included\u003c\/li\u003e\n\u003cli\u003eThermal reflective wrap fitted to lines for heat protection from nearby exhaust components\u003c\/li\u003e\n\u003cli\u003eReduces oil temperatures by 16°C or more with minimal pressure loss\u003c\/li\u003e\n\u003cli\u003eRecommended fitting torque: 20-34 Nm, maximum 47 Nm\u003c\/li\u003e\n\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers, and fitment notes are provided in the tabs above. Please confirm your STI's turbo type and exhaust manifold configuration before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this kit suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Silver","offer_id":53000228962597,"sku":"MMOC-STI-15T","price":1299.95,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":53000228995365,"sku":"MMOC-STI-15TBK","price":1299.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMOC-STI-15T_1.jpg?v=1785904217"},{"product_id":"mishimoto-thermostatic-oil-cooler-kit-subaru-wrx-sti-grb-gvb-19-row","title":"Mishimoto Thermostatic Oil Cooler Kit - Subaru WRX STI (GRB\/GVB) - 19-Row","description":"\u003ch2\u003eMishimoto Thermostatic Oil Cooler Kit - Subaru WRX STI (GRB\/GVB) - 19-Row\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto designs its cooling hardware to keep fluid temperatures consistent under sustained load, and this direct fit kit is purpose built for the \u003cstrong\u003eSubaru WRX STI\u003c\/strong\u003e. A 19-row aluminium cooler sits behind the front bumper to make the most of available airflow, helping protect engine internals on track days or hard street driving.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eSubaru WRX STI\u003c\/strong\u003e \u003cstrong\u003eGRB\u003c\/strong\u003e and \u003cstrong\u003eGVB\u003c\/strong\u003e chassis from 2008 onward, fitted with the single scroll turbo and unequal length exhaust manifold. It's available in silver (SKU MMOC-STI-08T) or black (SKU MMOC-STI-08TBK) cooler finishes - select your preferred option from the variant selector on this listing.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e This kit suits models with the single scroll turbo and unequal length exhaust manifold only. Vehicles fitted with the twin scroll turbo and equal length exhaust manifold may not be compatible.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e19-row aluminium oil cooler for increased surface area and cooling efficiency\u003c\/li\u003e\n\u003cli\u003ePreassembled stainless steel lines with -10AN fittings\u003c\/li\u003e\n\u003cli\u003eDirect fit mounting brackets for a straightforward installation\u003c\/li\u003e\n\u003cli\u003eThermal reflective wrap included to shield lines from exhaust heat\u003c\/li\u003e\n\u003cli\u003eReduces oil temperatures by approximately 11-17°C with minimal pressure loss\u003c\/li\u003e\n\u003cli\u003eOptional thermostatic sandwich plate available for additional oil temperature control\u003c\/li\u003e\n\u003cli\u003eRecommended torque: 20-34 Nm on straight fittings and banjo bolts, not exceeding 47 Nm\u003c\/li\u003e\n\u003cli\u003eBacked by the Mishimoto lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers, and fitment notes are provided in the tabs above. Please confirm your STI's turbo configuration and exhaust manifold type before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this kit suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Silver","offer_id":53000230404389,"sku":"MMOC-STI-08T","price":1259.95,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":53000230437157,"sku":"MMOC-STI-08TBK","price":1259.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMOC-STI-08T_1.jpg?v=1785904233"},{"product_id":"mishimoto-oil-cooler-kit-subaru-wrx-sti-va","title":"Mishimoto Oil Cooler Kit - Subaru WRX STI (VA)","description":"\u003ch2\u003eMishimoto Oil Cooler Kit - Subaru WRX STI (VA)\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto has built its reputation on keeping engine fluids in check, backed by a lifetime warranty across the range. This kit was engineered specifically to control oil temperatures on the \u003cstrong\u003eSubaru WRX STI\u003c\/strong\u003e, giving track and street drivers a reliable way to protect the engine under sustained load.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eVA WRX STI\u003c\/strong\u003e, SKU MMOC-STI-15. The kit is available in Stealth Black or Sleek Silver cooler finishes, with a choice of standard or thermostatic oil sandwich plate — select your preferred combination from the variant options on this listing.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e this kit is designed for VA STI models fitted with the single scroll turbo and unequal length exhaust manifold. Vehicles with the twin scroll turbo and equal length manifold may not be compatible.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e19-row aluminium oil cooler mounted in the front bumper for optimal airflow\u003c\/li\u003e\n\u003cli\u003ePreassembled stainless steel lines with -10AN fittings\u003c\/li\u003e\n\u003cli\u003eDirect fit mounting brackets for straightforward installation\u003c\/li\u003e\n\u003cli\u003eThermal reflective wrap included to shield lines from exhaust heat\u003c\/li\u003e\n\u003cli\u003eReduces oil temperatures by 16°C (20+°F) or more with minimal pressure loss\u003c\/li\u003e\n\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers, and fitment notes are provided in the tabs above. Please confirm your STI's turbo and exhaust manifold configuration before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this kit suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Silver","offer_id":53000230502693,"sku":"MMOC-STI-15","price":1179.95,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":53000230535461,"sku":"MMOC-STI-15BK","price":1179.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMOC-STI-15_1.jpg?v=1785904242"},{"product_id":"mishimoto-oil-cooler-subaru-wrx-sti-gvb-gvf","title":"Mishimoto Oil Cooler - Subaru WRX STI (GVB\/GVF)","description":"\u003ch2\u003eMishimoto Oil Cooler - Subaru WRX STI (GVB\/GVF)\u003c\/h2\u003e\n\u003cp\u003eMishimoto builds cooling components engineered around real world track and street demands, and this oil cooler is designed to keep the \u003cstrong\u003eSubaru WRX STI\u003c\/strong\u003e running at consistent oil temperatures under sustained load. A large capacity core and direct fit hardware make it a straightforward upgrade for owners chasing more reliable thermal management.\u003c\/p\u003e\n\u003cp\u003eThis listing covers the \u003cstrong\u003eSubaru WRX STI\u003c\/strong\u003e \u003cstrong\u003eGVB\/GVF\u003c\/strong\u003e chassis. The kit is available in Silver (SKU MMOC-STI-08) or Black (SKU MMOC-STI-08BK) cooler finishes, selectable via the variant options on this listing, with an optional thermostatic sandwich plate for finer oil temperature control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e This oil cooler is designed for models fitted with the single scroll turbo and unequal length exhaust manifold. Vehicles with the twin scroll turbo and equal length manifold may not be compatible.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e19-row cooler core mounted in the front bumper for improved airflow\u003c\/li\u003e\n\u003cli\u003eDirect fit mounting brackets for straightforward installation\u003c\/li\u003e\n\u003cli\u003ePreassembled stainless steel lines with -10AN fittings\u003c\/li\u003e\n\u003cli\u003eThermal reflective wrap included to shield lines from exhaust heat\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eChoice of black or silver cooler finish\u003c\/li\u003e\n\u003cli\u003eMishimoto lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Installation Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRecommended torque for straight fittings and banjo bolts: 20-34 Nm (15-25 lb-ft)\u003c\/li\u003e\n\u003cli\u003eDo not exceed maximum torque rating of 47 Nm (35 lb-ft)\u003c\/li\u003e\n\u003cli\u003eCheck all fittings and connections before driving, and recheck after initial use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eVehicle compatibility, OEM part numbers, and fitment notes are provided in the tabs above. Please ensure your vehicle's turbo and manifold configuration are confirmed before ordering.\u003c\/p\u003e\n\u003cp\u003eNot sure if this kit suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Silver","offer_id":53000230699301,"sku":"MMOC-STI-08","price":1159.95,"currency_code":"AUD","in_stock":true},{"title":"Black","offer_id":53000230732069,"sku":"MMOC-STI-08BK","price":1159.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMOC-STI-08_1.jpg?v=1785904254"},{"product_id":"mishimoto-thermostatic-oil-cooler-kit-subaru-brz-toyota-gr86-zd8-zn8","title":"Mishimoto Thermostatic Oil Cooler Kit - Subaru BRZ\/Toyota GR86 (ZD8\/ZN8)","description":"\u003ch2\u003eMishimoto Thermostatic Oil Cooler Kit - Subaru BRZ\/Toyota GR86 (ZD8\/ZN8)\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto builds cooling solutions engineered to keep engines running at their best under sustained load, backed by the Mishimoto Lifetime Warranty. The \u003cstrong\u003eSubaru BRZ\u003c\/strong\u003e and \u003cstrong\u003eToyota GR86\u003c\/strong\u003e share a fun, corner-carving nature, but their factory liquid-to-liquid oil cooler struggles once track time or hard driving pushes coolant and oil temps up together.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the 2022+ \u003cstrong\u003eSubaru BRZ (ZD8)\u003c\/strong\u003e and \u003cstrong\u003eToyota GR86 (ZN8)\u003c\/strong\u003e fitted with the FA24 engine. The kit is available in black or silver finish via the variant selector on this listing.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e this thermostatic version removes the factory liquid-to-liquid cooler so the oil and coolant systems run independently. A non-thermostatic option that retains the stock cooler is sold separately for dedicated race applications.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e19-row aluminium oil cooler mounted front and centre in the grille for maximum airflow\u003c\/li\u003e\n\u003cli\u003eDirect fit mounting bracket, no cutting or modification required\u003c\/li\u003e\n\u003cli\u003e-10AN braided stainless steel lines for consistent oil flow\u003c\/li\u003e\n\u003cli\u003eAdds approximately 710 mL (0.75 qt) of oil capacity to the system\u003c\/li\u003e\n\u003cli\u003eIncludes heat shielding sleeve to protect lines from abrasion and engine bay heat\u003c\/li\u003e\n\u003cli\u003eComplete installation hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers, and fitment notes are provided in the tabs above. Please confirm your vehicle's year and configuration before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this kit suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Black","offer_id":53000236597541,"sku":"MMOC-BRZ-22TBK","price":1559.95,"currency_code":"AUD","in_stock":true},{"title":"Silver","offer_id":53000236630309,"sku":"MMOC-BRZ-22TSL","price":1559.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMOC-BRZ-22TBK_1.jpg?v=1785904648"},{"product_id":"mishimoto-thermostatic-oil-cooler-kit-subaru-brz-zc6-zn6","title":"Mishimoto Thermostatic Oil Cooler Kit - Subaru BRZ (ZC6\/ZN6)","description":"\u003ch2\u003eMishimoto Thermostatic Oil Cooler Kit - Subaru BRZ (ZC6\/ZN6)\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto builds some of the most trusted cooling components in the performance aftermarket, and this thermostatic oil cooler kit brings serious thermal control to the \u003cstrong\u003eSubaru BRZ\u003c\/strong\u003e. Designed as a direct fit solution, it drops a large capacity cooler into the front bumper for maximum airflow, keeping oil temperatures in check whether you're lapping a circuit or driving hard through the mountains.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eSubaru BRZ (ZC6\/ZN6)\u003c\/strong\u003e and is available in both Silver Cooler and Black Cooler finishes, selectable via the variant options on this listing page. Both versions share identical thermal performance and hardware, so the choice comes down to preference on cooler colour.\u003c\/p\u003e\n\n\u003ch3\u003eKit Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLarge capacity thermostatic oil cooler core\u003c\/li\u003e\n\u003cli\u003eApplication specific mounting brackets\u003c\/li\u003e\n\u003cli\u003eStainless steel braided oil lines\u003c\/li\u003e\n\u003cli\u003eMishimoto billet aluminium oil sandwich plate\u003c\/li\u003e\n\u003cli\u003eCNC machined aluminium spacers for the sandwich plate\u003c\/li\u003e\n\u003cli\u003eThermostatic plate for faster warm-up and tighter temperature control\u003c\/li\u003e\n\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eImportant Installation Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRecommended torque for straight fittings and banjo bolts: 20.3-33.9 Nm (15-25 lb-ft)\u003c\/li\u003e\n\u003cli\u003eDo not exceed maximum torque rating of 47.5 Nm (35 lb-ft)\u003c\/li\u003e\n\u003cli\u003eAll fittings and connections should be checked for tightness before driving and re-checked after the first few kilometres\u003c\/li\u003e\n\u003cli\u003eInstallation difficulty rated 3 out of 5 — moderate mechanical skill recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers, and fitment notes are provided in the tabs above. Please ensure your vehicle's year, trim level, and configuration are confirmed before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this kit suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Silver Cooler","offer_id":53000240300325,"sku":"MMOC-BRZ-13T","price":1599.95,"currency_code":"AUD","in_stock":true},{"title":"Black Cooler","offer_id":53000240333093,"sku":"MMOC-BRZ-13TBK","price":1599.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMOC-BRZ-13T_1.jpg?v=1785904705"},{"product_id":"mishimoto-performance-thermostat-subaru-brz-zc6-toyota-gr86-zn8-gt86-zn6-my17-20-76c","title":"Mishimoto Performance Thermostat - Subaru BRZ (ZC6) \/ Toyota GR86 (ZN8) \/ GT86 (ZN6) MY17-20 - 76°C","description":"\u003ch2\u003eMishimoto Performance Thermostat - Subaru BRZ (ZC6) \/ Toyota GR86 (ZN8) \/ GT86 (ZN6) MY17-20 - 76°C\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto has engineered this racing thermostat to improve cooling efficiency on the FA20 engine found in the \u003cstrong\u003eSubaru BRZ\u003c\/strong\u003e, \u003cstrong\u003eToyota GR86\u003c\/strong\u003e and \u003cstrong\u003eGT86\u003c\/strong\u003e. Once the engine reaches operating temperature, it opens sooner than the factory unit, allowing coolant to circulate earlier and helping maintain lower, more consistent engine temperatures under load.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eSubaru BRZ (ZC6)\u003c\/strong\u003e, \u003cstrong\u003eToyota GR86 (ZN8)\u003c\/strong\u003e and \u003cstrong\u003eToyota GT86 (ZN6)\u003c\/strong\u003e, MY17-20. It's a direct replacement for the factory thermostat, suiting both stock and modified applications where extra thermal margin is useful on street or track.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOpening temperature: 76°C (169°F)\u003c\/li\u003e\n\u003cli\u003eDirect replacement for factory thermostat\u003c\/li\u003e\n\u003cli\u003eSuits FA20 engine platform\u003c\/li\u003e\n\u003cli\u003eBacked by Mishimoto's lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers, and fitment notes are provided in the tabs above. Please ensure your vehicle's year and model are confirmed before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this thermostat suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":53000243478821,"sku":"MMTS-BRZ-13","price":144.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMTS-BRZ-13_1.jpg?v=1785904748"},{"product_id":"mishimoto-front-tow-hook-subaru-brz-toyota-86-zc6-zn6","title":"Mishimoto Front Tow Hook - Subaru BRZ\/Toyota 86 (ZC6\/ZN6)","description":"\u003ch2\u003eMishimoto Front Tow Hook - Subaru BRZ\/Toyota 86 (ZC6\/ZN6)\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto has built a reputation on durable, performance focused componentry for road and track, and this tow hook carries that same engineering approach. Designed for the \u003cstrong\u003eSubaru BRZ\u003c\/strong\u003e, \u003cstrong\u003eToyota 86\u003c\/strong\u003e and \u003cstrong\u003eScion FR-S\u003c\/strong\u003e, it adds a functional motorsport touch to your front bumper while giving you a secure, rated point for towing at track days or shows.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eSubaru BRZ\u003c\/strong\u003e, \u003cstrong\u003eToyota 86\u003c\/strong\u003e and \u003cstrong\u003eScion FR-S\u003c\/strong\u003e, all built on the shared \u003cstrong\u003eZC6\/ZN6\u003c\/strong\u003e platform. The tow hook is available in a range of finishes including black, blue, gold, neon yellow, polished and red — select your preferred colour from the variant options on this listing page.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCNC machined from high strength steel for durability under load\u003c\/li\u003e\n\u003cli\u003eCorrosion resistant finish options to suit your build's colour scheme\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on installation using the factory tow hook mounting point\u003c\/li\u003e\n\u003cli\u003eLightweight design suited to both show and track use\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers and fitment notes are provided in the tabs above. Please confirm your vehicle's model year and configuration before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this tow hook suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Black","offer_id":53000244986149,"sku":"MMTH-BRZ-13BK","price":359.95,"currency_code":"AUD","in_stock":true},{"title":"Blue","offer_id":53000245018917,"sku":"MMTH-BRZ-13BL","price":359.95,"currency_code":"AUD","in_stock":true},{"title":"Gold","offer_id":53000245051685,"sku":"MMTH-BRZ-13GD","price":359.95,"currency_code":"AUD","in_stock":true},{"title":"Neon Yellow","offer_id":53000245084453,"sku":"MMTH-BRZ-13NY","price":359.95,"currency_code":"AUD","in_stock":true},{"title":"Polished","offer_id":53000245117221,"sku":"MMTH-BRZ-13P","price":359.95,"currency_code":"AUD","in_stock":true},{"title":"Red","offer_id":53000245149989,"sku":"MMTH-BRZ-13RD","price":359.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMTH-BRZ-13BK_1.jpg?v=1785904781"},{"product_id":"mishimoto-expansion-tank-subaru-brz-zc6-gt86-zn6","title":"Mishimoto Expansion Tank - Subaru BRZ (ZC6) \/ GT86 (ZN6)","description":"\u003ch2\u003eMishimoto Expansion Tank - Subaru BRZ (ZC6) \/ GT86 (ZN6)\u003c\/h2\u003e\n\n\u003cp\u003eFactory plastic coolant tanks get brittle and swell after years of heat cycling, eventually cracking and leaking without much warning. Mishimoto builds this coolant expansion tank from TIG-welded aluminium, giving the \u003cstrong\u003eSubaru BRZ (ZC6)\u003c\/strong\u003e and \u003cstrong\u003eToyota FR-S\/GT86 (ZN6)\u003c\/strong\u003e a stronger, better looking replacement that won't degrade the way the stock unit does.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eSubaru BRZ (ZC6)\u003c\/strong\u003e and \u003cstrong\u003eGT86 (ZN6)\u003c\/strong\u003e. It's available in Wrinkle Black or Polished finish, select your preferred option from the variant selector on this listing.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTIG-welded aluminium construction for long term durability\u003c\/li\u003e\n\u003cli\u003eIntegrated sight glass for quick visual coolant level checks\u003c\/li\u003e\n\u003cli\u003eDirect fit for stock or Mishimoto radiators on this platform\u003c\/li\u003e\n\u003cli\u003eWrinkle Black or Polished finish options\u003c\/li\u003e\n\u003cli\u003eBacked by the Mishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers, and fitment notes are provided in the tabs above. Please confirm your vehicle's year and configuration before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this tank suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Wrinkle Black","offer_id":53000245707045,"sku":"MMRT-BRZ-13BK","price":469.95,"currency_code":"AUD","in_stock":true},{"title":"Polished","offer_id":53000245739813,"sku":"MMRT-BRZ-13P","price":469.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMRT-BRZ-13BK_1.jpg?v=1785904820"},{"product_id":"mishimoto-oil-cooler-kit-subaru-brz-toyota-gr86-zd8-zn8","title":"Mishimoto Oil Cooler Kit - Subaru BRZ\/Toyota GR86 (ZD8\/ZN8)","description":"\u003ch2\u003eMishimoto Oil Cooler Kit - Subaru BRZ\/Toyota GR86 (ZD8\/ZN8)\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto builds performance cooling solutions engineered to keep engines and drivetrains in their optimal operating range under sustained load. The \u003cstrong\u003eSubaru BRZ\u003c\/strong\u003e and \u003cstrong\u003eToyota GR86\u003c\/strong\u003e share a factory liquid-to-liquid oil cooler that also has to cool engine coolant, leaving little margin once you're pushing hard on track or gravel. This kit adds a dedicated external cooler so oil temperature management no longer competes with engine cooling duties.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003e2022+ Subaru BRZ (ZD8)\u003c\/strong\u003e and \u003cstrong\u003eToyota GR86 (ZN8)\u003c\/strong\u003e. The kit is available in Black and Silver finish options, selectable via the variant selector on this listing.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e19-row external oil cooler mounted front and centre in the grille for maximum airflow\u003c\/li\u003e\n\u003cli\u003eAdds approximately 710 mL (0.75 qt) of additional oil capacity for improved cooling and lubrication\u003c\/li\u003e\n\u003cli\u003e-10AN braided steel lines for consistent flow and durability\u003c\/li\u003e\n\u003cli\u003eDirect fit mounting bracket, no permanent modification required\u003c\/li\u003e\n\u003cli\u003eHeat shielding sleeve to protect lines from abrasion and engine bay heat\u003c\/li\u003e\n\u003cli\u003eThermostatic spec removes the factory liquid-to-liquid cooler for independent operation; non-thermostatic spec retains it for faster warm-up in dedicated race applications\u003c\/li\u003e\n\u003cli\u003eBacked by the Mishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers, and fitment notes are provided in the tabs above. Please confirm your BRZ or GR86's model year and configuration before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this kit suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Black","offer_id":53000246034725,"sku":"MMOC-BRZ-22NTBK","price":1439.95,"currency_code":"AUD","in_stock":true},{"title":"Silver","offer_id":53000246067493,"sku":"MMOC-BRZ-22NTSL","price":1439.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMOC-BRZ-22NTBK_1.jpg?v=1785904855"},{"product_id":"mishimoto-turbo-inlet-pipe-volkswagen-golf-gti-r-mk7","title":"Mishimoto Turbo Inlet Pipe - Volkswagen Golf GTI\/R (MK7)","description":"\u003ch2\u003eMishimoto Turbo Inlet Pipe - Volkswagen Golf GTI\/R (MK7) - Cast Aluminium\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto has built a solid reputation for engineering intake and cooling components that outperform the factory equivalent, and this turbo inlet pipe is no exception. Designed for the \u003cstrong\u003eVolkswagen Golf GTI\u003c\/strong\u003e and \u003cstrong\u003eGolf R\u003c\/strong\u003e, it replaces the restrictive factory plastic pipe with a CNC-machined cast aluminium unit that improves airflow and supports quicker turbo spool.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eMK7\u003c\/strong\u003e chassis \u003cstrong\u003eGolf GTI\u003c\/strong\u003e and \u003cstrong\u003eGolf R\u003c\/strong\u003e fitted with the 1.8T or 2.0T engine. It pairs with the factory intake, the Mishimoto Performance Intake, and most aftermarket intake systems.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCast aluminium construction, CNC-machined for accuracy\u003c\/li\u003e\n\u003cli\u003eIncreased internal volume for improved airflow\u003c\/li\u003e\n\u003cli\u003eSmoother internal pathway compared to factory plastic pipe\u003c\/li\u003e\n\u003cli\u003eCompatible with stock and most aftermarket intake systems\u003c\/li\u003e\n\u003cli\u003eNo tuning required for installation\u003c\/li\u003e\n\u003cli\u003eBacked by Mishimoto's lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers, and fitment notes are provided in the tabs above. Please ensure your vehicle's year, trim level, and configuration are confirmed before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this pipe suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":53000265597221,"sku":"MMAI-MK7-TI","price":339.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMAI-MK7-TI_1.jpg?v=1785906418"},{"product_id":"mishimoto-air-intake-kit-volkswagen-golf-gti-r-mk7","title":"Mishimoto Air Intake Kit - Volkswagen Golf GTI\/R (MK7)","description":"\u003ch2\u003eMishimoto Air Intake Kit - Volkswagen Golf GTI (MK7)\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto has built a reputation for engineering cooling and induction components that punch above their weight, and this intake kit is no exception. Designed specifically for the \u003cstrong\u003eVolkswagen Golf GTI\u003c\/strong\u003e, it pairs a straightforward install with genuine performance gains, giving your hot hatch a sharper intake note and a bit more breathing room under load.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eMK7 Golf GTI\u003c\/strong\u003e and is available in Wrinkle Black or Wrinkle Red powder-coated finishes via the variant selector on this page.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBlack powder-coated airbox reduces heat soak and lowers intake air temperature\u003c\/li\u003e\n\u003cli\u003eCompatible with both SAI and non-SAI equipped vehicles via included filter and port\u003c\/li\u003e\n\u003cli\u003eDirect fit kit with all necessary hardware included\u003c\/li\u003e\n\u003cli\u003eMishimoto reports gains of up to 12 whp and 14 wtq on the stock tune during in house dyno testing\u003c\/li\u003e\n\u003cli\u003eBacked by the Mishimoto Lifetime Warranty\u003c\/li\u003e\n\u003cli\u003eInstall typically completed in around one hour\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers, and fitment notes are provided in the tabs above. Please ensure your vehicle's year, trim level, and configuration are confirmed before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this kit suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Wrinkle Black","offer_id":53000266055973,"sku":"MMAI-MK7-15WBK","price":889.95,"currency_code":"AUD","in_stock":true},{"title":"Wrinkle Red","offer_id":53000266088741,"sku":"MMAI-MK7-15WRD","price":889.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMAI-MK7-15WBK_1.jpg?v=1785906446"},{"product_id":"mishimoto-performance-air-intake-kit-volkswagen-golf-gti-r-mk7-audi-a3-s3-8v","title":"Mishimoto Performance Air Intake Kit - Volkswagen Golf GTI\/R (MK7) \/ Audi A3\/S3 (8V)","description":"\u003ch2\u003eMishimoto Performance Air Intake Kit - Volkswagen Golf GTI\/R (MK7) \/ Audi A3\/S3 (8V)\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto has built a reputation on engineering intake and cooling components that outperform factory parts without sacrificing reliability. This kit was developed specifically for the \u003cstrong\u003eVolkswagen Golf GTI\u003c\/strong\u003e and \u003cstrong\u003eGolf R\u003c\/strong\u003e, using flow bench testing and 3D modelling to extract more airflow from the turbocharged EA888 engine without the heat soak issues that plague cheaper aftermarket intakes.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eVolkswagen Golf GTI\u003c\/strong\u003e and \u003cstrong\u003eGolf R (MK7)\u003c\/strong\u003e, along with the \u003cstrong\u003eAudi A3\u003c\/strong\u003e and \u003cstrong\u003eS3 (8V)\u003c\/strong\u003e, all fitted with the Gen 3 EA888 turbocharged engine. The kit is a complete bolt-on replacement for the factory airbox and retains provisions for the factory secondary air injection (SAI) system, so no additional modification is required for a proper fit.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRotationally moulded thermoplastic airbox for reduced heat soak and long term durability\u003c\/li\u003e\n\u003cli\u003eReduces intake restriction by 51.7% compared to the factory airbox\u003c\/li\u003e\n\u003cli\u003eDyno proven gains of up to 3.93 kW (5.27 HP) and 12.5 Nm (9.23 lb-ft) on a stock tuned MK7 GTI\u003c\/li\u003e\n\u003cli\u003eHigh flow oiled air filter with 52% more surface area than the factory panel filter\u003c\/li\u003e\n\u003cli\u003eRetains factory SAI system provisions\u003c\/li\u003e\n\u003cli\u003eComplete bolt-on kit, no permanent modifications required\u003c\/li\u003e\n\u003cli\u003eBacked by the Mishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers, and fitment notes are provided in the tabs above. Please confirm your vehicle's model year and engine code before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this kit suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":53000266318117,"sku":"MMAI-MK7-15X","price":889.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMAI-MK7-15X_1.jpg?v=1785906463"},{"product_id":"mishimoto-coolant-re-route-hose-volkswagen-golf-gti-mk7","title":"Mishimoto Coolant Re-Route Hose - Volkswagen Golf\/GTI (MK7)","description":"\u003ch2\u003eMishimoto Coolant Re-Route Hose - Volkswagen Golf\/GTI (MK7) - Black\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto has built a strong reputation in the cooling space for VW and Audi's MQB platform, with products like their performance aluminium radiators and intercoolers already proven on the road and track. This silicone coolant re-route hose continues that focus, giving the \u003cstrong\u003eVolkswagen Golf\/GTI (MK7)\u003c\/strong\u003e a cleaner engine bay look while improving on the factory rubber hose's durability and heat resistance.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eVolkswagen Golf\u003c\/strong\u003e and \u003cstrong\u003eGTI\u003c\/strong\u003e models built on the \u003cstrong\u003eMK7\u003c\/strong\u003e chassis, finished in black silicone. It's designed to work with both the factory intake system and aftermarket intakes, including Mishimoto's own MQB intake kit.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFive layer silicone construction with embedded heat resistant fibres\u003c\/li\u003e\n\u003cli\u003eIntegrated factory style internal check valve for correct coolant return\u003c\/li\u003e\n\u003cli\u003eCompatible with stock and aftermarket intake systems\u003c\/li\u003e\n\u003cli\u003eIncludes worm gear clamps for straightforward installation\u003c\/li\u003e\n\u003cli\u003eBlack silicone finish\u003c\/li\u003e\n\u003cli\u003eCovered by the Mishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers, and fitment notes are provided in the tabs above. Please confirm your Golf or GTI's trim and configuration before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this hose suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":53000266481957,"sku":"MMHOSE-MK7-15RRBK","price":70.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMHOSE-MK7-15RR_1.jpg?v=1785906476"},{"product_id":"mishimoto-intercooler-pipe-kit-volkswagen-golf-gti-mk7-275in","title":"Mishimoto Intercooler Pipe Kit - Volkswagen Golf GTI (MK7) - 2.75in","description":"\u003ch2\u003eMishimoto Intercooler Pipe Kit - Volkswagen Golf GTI (MK7) - 2.75in\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto has built a reputation for tackling the weak points OEM engineers leave behind, and the stock charge piping on the \u003cstrong\u003eVolkswagen Golf GTI (MK7)\u003c\/strong\u003e is a prime example. Factory pipework relies on plastic and rubber sections that are prone to cracking and restrict airflow under boost. This kit replaces that setup with mandrel bent aluminium piping and 5-layer silicone couplers for a stronger, more efficient charge path.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eVolkswagen Golf GTI (MK7)\u003c\/strong\u003e fitted with the EA888 Gen3 engine. It's available in polished or wrinkle black finish, selectable via the variant options on this listing page.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This kit suits manual and 6-speed DSG transmissions only. The hot side pipe may not fit correctly on vehicles fitted with the 7-speed DSG transmission.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMandrel bent aluminium construction with reduced bends\u003c\/li\u003e\n\u003cli\u003e2.75 in (70mm) piping diameter for improved airflow\u003c\/li\u003e\n\u003cli\u003e5-layer, heat resistant silicone couplers\u003c\/li\u003e\n\u003cli\u003eUp to 30 percent increase in airflow versus stock\u003c\/li\u003e\n\u003cli\u003ePolished or wrinkle black finish options\u003c\/li\u003e\n\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers, and fitment notes are provided in the tabs above. Please confirm your transmission type before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this kit suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Polished","offer_id":53000266711333,"sku":"MMICP-MK7-15KP","price":869.95,"currency_code":"AUD","in_stock":true},{"title":"Wrinkle Black","offer_id":53000266744101,"sku":"MMICP-MK7-15KWBK","price":869.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMICP-MK7-15KSL_1.jpg?v=1785906494"},{"product_id":"mishimoto-performance-intake-kit-toyota-gr-corolla-gzea14","title":"Mishimoto Performance Intake Kit - Toyota GR Corolla (GZEA14)","description":"\u003ch2\u003eMishimoto Performance Intake Kit - Toyota GR Corolla (GZEA14)\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto engineers this performance intake to give the \u003cstrong\u003eToyota GR Corolla\u003c\/strong\u003e's turbocharged G16E-GTS engine a smoother, cooler path to breathe. The direct fit kit (SKU MMAI-GRC-23) replaces the restrictive factory tract, delivering measurable gains while running cleanly without triggering check engine lights.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eToyota GR Corolla (GZEA14)\u003c\/strong\u003e, 2023 onwards, as a direct replacement for the factory intake system on this chassis.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDyno proven gains of up to 4 hp (3 kW) and 5.4 Nm (4 ft-lb)\u003c\/li\u003e\n\u003cli\u003e42% increase in exit flow rate over the factory intake\u003c\/li\u003e\n\u003cli\u003eOiled air filter for improved filtration and airflow\u003c\/li\u003e\n\u003cli\u003eNo check engine light triggered during normal operation\u003c\/li\u003e\n\u003cli\u003eFilter should be cleaned and re-oiled every 16,000–24,000 km (10,000–15,000 miles) under normal driving, more frequently in dusty or off road conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers, and fitment notes are provided in the tabs above. Please ensure your vehicle's year, trim level, and configuration are confirmed before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this kit suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":53000288895269,"sku":"MMAI-GRC-23","price":949.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMAI-GRC-23_1.jpg?v=1785907890"},{"product_id":"mishimoto-front-tow-hook-toyota-gr-corolla-gzea14","title":"Mishimoto Front Tow Hook - Toyota GR Corolla (GZEA14)","description":"\u003ch2\u003eMishimoto Front Tow Hook - Toyota GR Corolla (GZEA14)\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto builds this racing tow hook for drivers who want function without leaving a scruffy factory hook bolted to the bumper. Designed specifically for the \u003cstrong\u003eToyota GR Corolla\u003c\/strong\u003e, it swaps the stock unit for a piece that's just as strong but looks like it belongs on the car.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eToyota GR Corolla (GZEA14)\u003c\/strong\u003e. The tow hook is available in five powder coated colour options via the variant selector on this page, so you can match it to your build.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConstructed from 7075 aluminium and 304 stainless steel\u003c\/li\u003e\n\u003cli\u003e50.8mm (2 in) inside diameter fold-down ring\u003c\/li\u003e\n\u003cli\u003eStraight-pull strength rated to 3,629 kg (8,000 lb)\u003c\/li\u003e\n\u003cli\u003ePowder coated finish for durability\u003c\/li\u003e\n\u003cli\u003eIncludes tow hook indication arrow stickers\u003c\/li\u003e\n\u003cli\u003eCovered by Mishimoto's lifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers, and fitment notes are provided in the tabs above. Please confirm your GR Corolla's build details before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this tow hook suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Black","offer_id":53000290664741,"sku":"MMTH-GRC-23BK","price":349.95,"currency_code":"AUD","in_stock":true},{"title":"Blue","offer_id":53000290697509,"sku":"MMTH-GRC-23BL","price":349.95,"currency_code":"AUD","in_stock":true},{"title":"Gold","offer_id":53000290730277,"sku":"MMTH-GRC-23GD","price":349.95,"currency_code":"AUD","in_stock":true},{"title":"Polished","offer_id":53000290763045,"sku":"MMTH-GRC-23P","price":349.95,"currency_code":"AUD","in_stock":true},{"title":"Red","offer_id":53000290795813,"sku":"MMTH-GRC-23RD","price":349.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMTH-GRC-23BK_1.jpg?v=1785907986"},{"product_id":"mishimoto-expansion-tank-toyota-gr-corolla-gzea14","title":"Mishimoto Expansion Tank - Toyota GR Corolla (GZEA14)","description":"\u003ch2\u003eMishimoto Expansion Tank - Toyota GR Corolla (GZEA14)\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto has built a reputation for solving the cooling weak points manufacturers leave behind, and the stock plastic reservoir on the \u003cstrong\u003eToyota GR Corolla\u003c\/strong\u003e is a classic example. This aluminium replacement tank is engineered to handle sustained heat cycling without the yellowing, cracking or leaking that plagues the factory unit, giving your cooling system a more durable, track-ready upgrade.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eToyota GR Corolla (GZEA14)\u003c\/strong\u003e, sold as a direct-fit replacement for the factory expansion tank. It's available in micro-wrinkle black or red finishes, selectable via the variant options on this listing (SKU MMRT-GRC-23MWBK for black, MMRT-GRC-23MWRD for red).\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAll-aluminium construction, resistant to cracking and heat degradation\u003c\/li\u003e\n\u003cli\u003eInternal baffles reduce air entry under hard acceleration and cornering\u003c\/li\u003e\n\u003cli\u003eApproximately 40 percent more coolant capacity than the factory tank for improved heat dissipation\u003c\/li\u003e\n\u003cli\u003eEasy-access bleed port for simpler air bleeding\u003c\/li\u003e\n\u003cli\u003eHigh-visibility sight glass with stamped cold-fill line for quick level checks\u003c\/li\u003e\n\u003cli\u003eAvailable in micro-wrinkle black or red finish\u003c\/li\u003e\n\u003cli\u003eCovered by the Mishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers, and fitment notes are provided in the tabs above. Please confirm your GR Corolla's build date and configuration before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this tank suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Black","offer_id":53000292499749,"sku":"MMRT-GRC-23MWBK","price":739.95,"currency_code":"AUD","in_stock":true},{"title":"Red","offer_id":53000292532517,"sku":"MMRT-GRC-23MWRD","price":739.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMRT-GRC-23MWBK_1.jpg?v=1785907997"},{"product_id":"mishimoto-oil-cooler-kit-toyota-gr-corolla-gzea14","title":"Mishimoto Oil Cooler Kit - Toyota GR Corolla (GZEA14)","description":"\u003ch2\u003eMishimoto Oil Cooler Kit - Toyota GR Corolla (GZEA14)\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto builds this kit specifically to tame the oil temperature spikes that come with the \u003cstrong\u003eToyota GR Corolla\u003c\/strong\u003e's high compression, high boost 3-cylinder engine. Backed by Mishimoto's Lifetime Warranty, it's engineered for drivers pushing their GR Corolla hard on track without cooking the oil.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eToyota GR Corolla (GZEA14)\u003c\/strong\u003e, 2023 onwards. The kit is available with your choice of nylon-sheathed line finish via the variant selector on this listing page, and Mishimoto also offers thermostatic or non-thermostatic sandwich plate options depending on your climate and use case.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Choose the thermostatic sandwich plate for daily driving or cold climates, and the non-thermostatic plate for dedicated track use or hot environments. Confirm which plate suits your application before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e14-row dual-pass bar-and-plate oil cooler\u003c\/li\u003e\n\u003cli\u003eDirect-fit mounting brackets for upper grille installation\u003c\/li\u003e\n\u003cli\u003ePre-assembled -10AN braided stainless steel lines with black nylon sheathing\u003c\/li\u003e\n\u003cli\u003eIncreases system oil capacity by approximately 720 mL (0.76 qt)\u003c\/li\u003e\n\u003cli\u003eDyno-tested average oil temperature reduction of around 7°C (13°F)\u003c\/li\u003e\n\u003cli\u003eThermostatic or non-thermostatic sandwich plate options available\u003c\/li\u003e\n\u003cli\u003eBacked by Mishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers, and fitment notes are provided in the tabs above. Please confirm your GR Corolla's model year and configuration before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this kit suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Black","offer_id":53000292794661,"sku":"MMOC-GRC-23NTBK","price":1399.95,"currency_code":"AUD","in_stock":true},{"title":"Silver","offer_id":53000292827429,"sku":"MMOC-GRC-23NTSL","price":1399.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMOC-GRC-23NTBK_1.jpg?v=1785908014"},{"product_id":"mishimoto-license-plate-relocation-kit-toyota-gr-corolla-gzea14","title":"Mishimoto License Plate Relocation Kit - Toyota GR Corolla (GZEA14)","description":"\u003ch2\u003eMishimoto License Plate Relocation Kit - Toyota GR Corolla (GZEA14)\u003c\/h2\u003e\n\n\u003cp\u003eA front plate mounted dead centre in the grille is a real problem on the \u003cstrong\u003eToyota GR Corolla\u003c\/strong\u003e - it chokes airflow to the radiator and adds drag you don't need. Mishimoto built this relocation kit to move the plate out of the way while keeping the install clean and factory looking, backed by their signature Lifetime Warranty.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eToyota GR Corolla (GZEA14)\u003c\/strong\u003e, SKU MMLP-GRC-23. The bracket mounts to the OEM tow hook point, so no drilling or cutting is required, and it's designed to follow the contours of the front bumper for a factory fit.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFabricated from 6061 aluminium, anodised and powder coated\u003c\/li\u003e\n\u003cli\u003eMounts to the OEM tow hook location for a direct fit\u003c\/li\u003e\n\u003cli\u003eAngled design follows the bumper's body lines\u003c\/li\u003e\n\u003cli\u003eFrees up centre grille space for improved radiator airflow\u003c\/li\u003e\n\u003cli\u003eIncludes all mounting hardware required for installation\u003c\/li\u003e\n\u003cli\u003eCovered by the Mishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers, and fitment notes are provided in the tabs above. Please confirm your GR Corolla's year and configuration before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this kit suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":53000292925733,"sku":"MMLP-GRC-23","price":174.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMLP-GRC-23_1.jpg?v=1785908024"},{"product_id":"mishimoto-intercooler-pipe-kit-toyota-gr-corolla-gzea14","title":"Mishimoto Intercooler Pipe Kit - Toyota GR Corolla (GZEA14)","description":"\u003ch2\u003eMishimoto Intercooler Pipe Kit - Toyota GR Corolla (GZEA14)\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto builds this piping kit to replace the factory plastic intercooler tubes on the \u003cstrong\u003eToyota GR Corolla\u003c\/strong\u003e with a high flow aluminium solution. It's engineered to work alongside Mishimoto's own intercooler and radiator upgrades, giving the whole cooling system more surface area and better airflow than stock.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eToyota GR Corolla (GZEA14)\u003c\/strong\u003e, 2023 onwards. The kit is available in Wrinkle Black or Wrinkle Red finish, selectable via the variant options on this listing page (SKU MMICP-GRC-23BK for Wrinkle Black).\u003c\/p\u003e\n\n\u003ch3\u003eKit Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCast aluminium hot side and cold side intercooler pipes\u003c\/li\u003e\n\u003cli\u003eCustom cast inlet section\u003c\/li\u003e\n\u003cli\u003eSilicone couplers\u003c\/li\u003e\n\u003cli\u003eHigh torque worm gear clamps\u003c\/li\u003e\n\u003cli\u003eDirect fit design, no cutting or modification required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers, and fitment notes are provided in the tabs above. Please ensure your vehicle's year, trim level, and configuration are confirmed before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this kit suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Wrinkle Black","offer_id":53000292958501,"sku":"MMICP-GRC-23BK","price":1039.95,"currency_code":"AUD","in_stock":true},{"title":"Wrinkle Red","offer_id":53000292991269,"sku":"MMICP-GRC-23RD","price":1039.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMICP-GRC-23BK_2.jpg?v=1785908038"},{"product_id":"mishimoto-silicone-radiator-hose-kit-toyota-gr-corolla-gzea14","title":"Mishimoto Silicone Radiator Hose Kit - Toyota GR Corolla (GZEA14)","description":"\u003ch2\u003eMishimoto Silicone Radiator Hose Kit - Toyota GR Corolla (GZEA14)\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto builds cooling system components engineered to outlast and outperform factory rubber, and this silicone radiator hose kit is no exception. Designed specifically for the \u003cstrong\u003eToyota GR Corolla\u003c\/strong\u003e, it swaps out the factory hoses for silicone items that resist heat, pressure and age related cracking far better than stock rubber, while tidying up the engine bay in the process.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eToyota GR Corolla (GZEA14)\u003c\/strong\u003e. The kit is available in black, blue or red silicone, so pick your preferred colour from the variant selector on this listing.\u003c\/p\u003e\n\n\u003ch3\u003eKit Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUpper radiator hose\u003c\/li\u003e\n\u003cli\u003eLower radiator hose\u003c\/li\u003e\n\u003cli\u003eExpansion tank hoses\u003c\/li\u003e\n\u003cli\u003eAncillary hose\u003c\/li\u003e\n\u003cli\u003eAll necessary hose clamps for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSilicone construction for improved heat and pressure resistance over rubber\u003c\/li\u003e\n\u003cli\u003eBuilt to resist cracking, degradation and leaks over the long term\u003c\/li\u003e\n\u003cli\u003eAvailable in black, blue or red to suit your engine bay\u003c\/li\u003e\n\u003cli\u003eBacked by the Mishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility and fitment notes are provided in the tabs above. Please confirm your GR Corolla's model year and configuration before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this kit suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Black","offer_id":53000293024037,"sku":"MMHOSE-GRC-23BK","price":329.95,"currency_code":"AUD","in_stock":true},{"title":"Blue","offer_id":53000293056805,"sku":"MMHOSE-GRC-23BL","price":329.95,"currency_code":"AUD","in_stock":true},{"title":"Red","offer_id":53000293089573,"sku":"MMHOSE-GRC-23RD","price":329.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMHOSE-GRC-23BK_1.jpg?v=1785908050"},{"product_id":"mishimoto-air-intake-kit-subaru-brz-zc6-toyota-86","title":"Mishimoto Air Intake Kit - Subaru BRZ (ZC6) \/ Toyota 86","description":"\u003ch2\u003eMishimoto Air Intake Kit - Subaru BRZ (ZC6) \/ Toyota 86\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto has built its reputation on serious cooling and induction hardware backed by a lifetime warranty, and this intake kit is no exception. Designed specifically for the \u003cstrong\u003eSubaru BRZ\u003c\/strong\u003e and \u003cstrong\u003eToyota 86\u003c\/strong\u003e, it swaps out the restrictive factory airbox for a smoother, more efficient induction path without touching the front bumper.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eSubaru BRZ (ZC6)\u003c\/strong\u003e and \u003cstrong\u003eToyota 86 (ZN6)\u003c\/strong\u003e, model years 2013 to 2020. The kit is available in a choice of induction hose and airbox finishes, including Black, Blue, Red, Polished and Wrinkle Black, selectable via the variant options on this listing.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This intake is designed to work alongside the Mishimoto BRZ\/86 Oil Cooler Kit. Filter re-oiling is not covered under the Mishimoto Lifetime Warranty.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSilicone induction hose paired with an aluminium intake pipe for smooth, consistent airflow\u003c\/li\u003e\n\u003cli\u003eCNC machined MAF housing with air straightener for accurate sensor readings\u003c\/li\u003e\n\u003cli\u003eFully serviceable Mishimoto oiled air filter with a claimed 16 percent increase in filter surface area\u003c\/li\u003e\n\u003cli\u003ePowder coated airbox to shield the filter from engine bay heat soak\u003c\/li\u003e\n\u003cli\u003eMishimoto states the kit delivers a bolt-on gain of 7 whp \/ 5 wtq with safe air\/fuel ratios maintained across the powerband\u003c\/li\u003e\n\u003cli\u003eNo front bumper removal required for installation\u003c\/li\u003e\n\u003cli\u003eBacked by the Mishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, part numbers and fitment notes are provided in the tabs above. Please confirm your BRZ or 86's model year and configuration before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this kit suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Black","offer_id":53000299872549,"sku":"MMAI-BRZ-13BBK","price":789.95,"currency_code":"AUD","in_stock":true},{"title":"Blue","offer_id":53000299905317,"sku":"MMAI-BRZ-13BBL","price":789.95,"currency_code":"AUD","in_stock":true},{"title":"Red","offer_id":53000299938085,"sku":"MMAI-BRZ-13BRD","price":789.95,"currency_code":"AUD","in_stock":true},{"title":"Polished","offer_id":53000299970853,"sku":"MMAI-BRZ-13P","price":879.95,"currency_code":"AUD","in_stock":true},{"title":"Wrinkle Black","offer_id":53000300003621,"sku":"MMAI-BRZ-13WBK","price":879.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMAI-BRZ-13BBK_1.jpg?v=1785908265"},{"product_id":"mishimoto-oil-cooler-kit-subaru-brz-toyota-86-zc6","title":"Mishimoto Oil Cooler Kit - Subaru BRZ\/Toyota 86 (ZC6)","description":"\u003ch2\u003eMishimoto Oil Cooler Kit - Subaru BRZ\/Toyota 86 (ZC6)\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto builds its cooling components for enthusiasts who push their cars hard, and this oil cooler kit is designed specifically to keep oil temperatures in check on the \u003cstrong\u003eSubaru BRZ\u003c\/strong\u003e and \u003cstrong\u003eToyota 86\u003c\/strong\u003e. It mounts a large capacity cooler in the front bumper for maximum airflow, helping protect the 2.0 litre boxer engine on track days or long mountain runs. SKU MMOC-BRZ-13.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eSubaru BRZ (ZC6)\u003c\/strong\u003e and \u003cstrong\u003eToyota 86 (ZN6)\u003c\/strong\u003e. The kit is available in silver or black cooler finishes — select your preferred option from the variant selector on this listing page.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e All fittings and banjo bolts must be torqued to 20-34 Nm (15-25 lb-ft) and must never exceed 47 Nm (35 lb-ft). Check all connections for tightness before driving and again after the first few kilometres.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLarge front mounted oil cooler for improved thermal control\u003c\/li\u003e\n\u003cli\u003eDirect fit design with all hardware included for bolt-on installation\u003c\/li\u003e\n\u003cli\u003eHelps reduce oil temperatures for street and track use\u003c\/li\u003e\n\u003cli\u003eAvailable in silver or black cooler finish\u003c\/li\u003e\n\u003cli\u003eBacked by Mishimoto's lifetime warranty\u003c\/li\u003e\n\u003cli\u003eInstall difficulty rated 3 out of 10 by Mishimoto\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers, and fitment notes are provided in the tabs above. Please confirm your BRZ or 86's model year and configuration before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this kit suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Silver Cooler","offer_id":53000306589989,"sku":"MMOC-BRZ-13","price":1479.95,"currency_code":"AUD","in_stock":true},{"title":"Black Cooler","offer_id":53000306622757,"sku":"MMOC-BRZ-13BK","price":1479.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMOC-BRZ-13_1.jpg?v=1785908407"},{"product_id":"mishimoto-non-thermostatic-oil-sandwich-plate-and-adapter-subaru-brz-zc6-toyota-86-zn6-silver","title":"Mishimoto Non-Thermostatic Oil Sandwich Plate and Adapter - Subaru BRZ (ZC6) \/ Toyota 86 (ZN6) - Silver","description":"\u003ch2\u003eMishimoto Non-Thermostatic Oil Sandwich Plate and Adapter - Subaru BRZ (ZC6) \/ Toyota 86 (ZN6) - Silver\u003c\/h2\u003e\n\n\u003cp\u003eKeeping oil temperatures in check matters once you start pushing the FA20 engine hard on track, and Mishimoto's billet aluminium sandwich plate gives you a clean, no drill way to add an external oil cooler to your \u003cstrong\u003eSubaru BRZ\u003c\/strong\u003e or \u003cstrong\u003eToyota 86\u003c\/strong\u003e. It's a lightweight, precision machined unit backed by Mishimoto's Lifetime Warranty, built for enthusiasts who want reliable oil cooling without complicating routine servicing.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the non-thermostatic, silver finish sandwich plate for the \u003cstrong\u003eSubaru BRZ (ZC6)\u003c\/strong\u003e and \u003cstrong\u003eToyota 86 (ZN6)\u003c\/strong\u003e, suiting naturally aspirated, turbocharged and supercharged builds alike. A thermostatic version with selectable thermostat temperatures is also available separately if you'd prefer regulated oil warm up.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBillet aluminium construction in a silver finish\u003c\/li\u003e\n\u003cli\u003eM20 x 1.5 ports accept Mishimoto M20 to -10AN adapters for oil cooler line fitment\u003c\/li\u003e\n\u003cli\u003e1\/8-NPT ports for temperature or pressure sensor connection\u003c\/li\u003e\n\u003cli\u003eDirect fit to the factory oil filter housing, no drilling or tapping required\u003c\/li\u003e\n\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKit Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSandwich plate and adapter set\u003c\/li\u003e\n\u003cli\u003eCentre bolt\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers, and fitment notes are provided in the tabs above. Please ensure your vehicle's year, trim level, and configuration are confirmed before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this kit suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":53000307081509,"sku":"MMOCA-BRZ-13","price":389.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMOCA-BRZ-13_1.jpg?v=1785908423"},{"product_id":"mishimoto-thermostatic-sandwich-plate-and-adapter-subaru-brz-zc6-toyota-86-zn6-gold","title":"Mishimoto Thermostatic Sandwich Plate and Adapter - Subaru BRZ (ZC6) \/ Toyota 86 (ZN6) - Gold","description":"\u003ch2\u003eMishimoto Thermostatic Sandwich Plate and Adapter - Subaru BRZ (ZC6) \/ Toyota 86 (ZN6) - Gold\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto builds oil cooling hardware backed by a lifetime warranty, and this billet aluminium sandwich plate is designed for enthusiasts running an external oil cooler on the \u003cstrong\u003eFA20\u003c\/strong\u003e engine. It bolts in without drilling or tapping, using the factory oil filter's high volume feed.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eSubaru BRZ (ZC6)\u003c\/strong\u003e and \u003cstrong\u003eToyota 86 (ZN6)\u003c\/strong\u003e, suiting both naturally aspirated and forced induction builds. The thermostatic design allows optional 71°C, 85°C or 93°C (160°F, 185°F, 200°F) thermostats to be fitted for improved warm-up in cooler climates.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight billet aluminium construction, gold finish\u003c\/li\u003e\n\u003cli\u003eM20x1.5 ports accept Mishimoto M20 to -10AN adapters\u003c\/li\u003e\n\u003cli\u003eTwo 1\/8-NPT ports for temperature or pressure sensors\u003c\/li\u003e\n\u003cli\u003eIncludes sandwich plate, adapter set and centre bolt\u003c\/li\u003e\n\u003cli\u003eOptional thermostat inserts for climate specific warm-up\u003c\/li\u003e\n\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers, and fitment notes are provided in the tabs above. Please ensure your vehicle's year, trim level, and configuration are confirmed before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this kit suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":53000307573029,"sku":"MMOCA-BRZ-13T","price":519.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMOCA-BRZ-13T_1.jpg?v=1785908434"},{"product_id":"mishimoto-license-plate-relocation-kit-subaru-brz-zc6-zd8-toyota-gr86-zn8","title":"Mishimoto License Plate Relocation Kit - Subaru BRZ (ZC6\/ZD8) \/ Toyota GR86 (ZN8)","description":"\u003ch2\u003eMishimoto License Plate Relocation Kit - Subaru BRZ (ZC6\/ZD8) \/ Toyota GR86 (ZN8)\u003c\/h2\u003e\n\n\u003cp\u003eThe front numberplate mount on the \u003cstrong\u003eSubaru BRZ\u003c\/strong\u003e and \u003cstrong\u003eToyota GR86\u003c\/strong\u003e sits right in the middle of the lower grille, choking airflow to the radiator and adding drag. Mishimoto builds this relocation kit specifically to move the plate out of the way while keeping things factory tidy, backed by their Lifetime Warranty.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eSubaru BRZ (ZC6\/ZD8)\u003c\/strong\u003e and \u003cstrong\u003eToyota GR86 (ZN8)\u003c\/strong\u003e. The bracket mounts to the OEM tow hook point and follows the bumper's contours for a factory look, with all hardware included for a straightforward install.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCNC machined from 6061 aluminium\u003c\/li\u003e\n\u003cli\u003eAnodised and powder coated finish\u003c\/li\u003e\n\u003cli\u003eMounts to OEM tow hook location for direct fitment\u003c\/li\u003e\n\u003cli\u003eAngled design follows bumper body lines\u003c\/li\u003e\n\u003cli\u003eFrees up centre grille opening for improved radiator airflow\u003c\/li\u003e\n\u003cli\u003eReduces front end drag from centrally mounted plates\u003c\/li\u003e\n\u003cli\u003eAll mounting hardware included\u003c\/li\u003e\n\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility and fitment notes are provided in the tabs above. Please confirm your model and year before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this kit suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":53000307605797,"sku":"MMLP-BRZ-22","price":174.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMLP-BRZ-22_01.jpg?v=1785908442"},{"product_id":"mishimoto-silicone-radiator-hose-kit-subaru-brz-zc6-toyota-86-zn6","title":"Mishimoto Silicone Radiator Hose Kit - Subaru BRZ (ZC6) \/ Toyota 86 (ZN6)","description":"\u003ch2\u003eMishimoto Silicone Radiator Hose Kit - Subaru BRZ (ZC6) \/ Toyota 86 (ZN6)\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto builds its cooling components to handle real world heat and pressure, and this silicone radiator hose kit is no exception. Designed as a direct OEM replacement for the \u003cstrong\u003eSubaru BRZ\u003c\/strong\u003e and \u003cstrong\u003eToyota 86\u003c\/strong\u003e, it swaps out the factory rubber hoses for a dual layer silicone construction that resists heat soak and pressure spikes far better than the ageing OEM items.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eSubaru BRZ (ZC6)\u003c\/strong\u003e and \u003cstrong\u003eToyota 86 (ZN6)\u003c\/strong\u003e. The kit is available in Black or Red, selectable via the variant options on this listing page, so you can match your engine bay finish.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDual layer silicone construction with embedded heat resistant fibres\u003c\/li\u003e\n\u003cli\u003eImproved heat reduction and pressure tolerance over OEM rubber hoses\u003c\/li\u003e\n\u003cli\u003eOEM replacement fit — no cutting or modification required\u003c\/li\u003e\n\u003cli\u003eAvailable in Black or Red\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers, and fitment notes are provided in the tabs above. Please ensure your vehicle's year, trim level, and configuration are confirmed before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this kit suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Black","offer_id":53000308097317,"sku":"MMHOSE-BRZ-13BK","price":299.95,"currency_code":"AUD","in_stock":true},{"title":"Red","offer_id":53000308130085,"sku":"MMHOSE-BRZ-13RD","price":299.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMHOSE-BRZ-13BK_1.jpg?v=1785908454"},{"product_id":"mishimoto-silicone-induction-hose-subaru-brz-zd8-toyota-gr86-zn8","title":"Mishimoto Silicone Induction Hose - Subaru BRZ (ZD8) \/ Toyota GR86 (ZN8)","description":"\u003ch2\u003eMishimoto Silicone Induction Hose - Subaru BRZ (ZD8) \/ Toyota GR86 (ZN8)\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto builds this induction hose to fix a genuine weak point in the naturally aspirated FA24D engine. The \u003cstrong\u003eSubaru BRZ\u003c\/strong\u003e and \u003cstrong\u003eToyota GR86\u003c\/strong\u003e come from the factory with a corrugated rubber hose linking airbox to throttle body, and that corrugation creates turbulence that quietly robs airflow and power.\n\nThis listing covers the \u003cstrong\u003eSubaru BRZ (ZD8)\u003c\/strong\u003e and \u003cstrong\u003eToyota GR86 (ZN8)\u003c\/strong\u003e, sold as SKU MMHOSE-BRZ-22IHBK. It's available in black or red silicone, so check the variant selector on this listing to pick your colour.\n\n\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e5-ply silicone construction with stainless steel wire reinforcement\u003c\/li\u003e\n\u003cli\u003e76mm (3 in) inner diameter for smoother, less turbulent airflow\u003c\/li\u003e\n\u003cli\u003eSmooth bore replaces the factory corrugated rubber section\u003c\/li\u003e\n\u003cli\u003eRetains the factory lower resonator to preserve intake tuning\u003c\/li\u003e\n\u003cli\u003eSafe to run on the stock tune\u003c\/li\u003e\n\u003cli\u003eInstalls in under an hour with included hardware\u003c\/li\u003e\n\u003cli\u003eBacked by the Mishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers, and fitment notes are provided in the tabs above. Please confirm your vehicle's model year and configuration before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this hose suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Black","offer_id":53000308195621,"sku":"MMHOSE-BRZ-22IHBK","price":229.95,"currency_code":"AUD","in_stock":true},{"title":"Red","offer_id":53000308228389,"sku":"MMHOSE-BRZ-22IHRD","price":229.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMHOSE-BRZ-22IHBK_1.jpg?v=1785908465"},{"product_id":"mishimoto-induction-hose-subaru-brz-zc6","title":"Mishimoto Induction Hose - Subaru BRZ (ZC6)","description":"\u003ch2\u003eMishimoto Induction Hose - Subaru BRZ (ZC6)\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto builds its induction hoses from high grade silicone reinforced with heat resistant fibres and embedded steel rings, giving the \u003cstrong\u003eSubaru BRZ\u003c\/strong\u003e a more capable replacement for the restrictive factory hose. It's designed to improve airflow and throttle response while retaining a factory-style fit.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eSubaru BRZ (ZC6)\u003c\/strong\u003e and \u003cstrong\u003eToyota 86\u003c\/strong\u003e. SKU MMHOSE-BRZ-13IBK is the black option, with blue and red also available via the variant selector on this listing page.\u003c\/p\u003e\n\n\u003ch3\u003eKit Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSilicone induction hose with embedded steel reinforcement rings\u003c\/li\u003e\n\u003cli\u003eRubber cap to delete the sound generator\u003c\/li\u003e\n\u003cli\u003eCNC-machined plug for optional intake resonator removal\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers, and fitment notes are provided in the tabs above. Please confirm your vehicle's model and configuration before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this hose suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Black","offer_id":53000308424997,"sku":"MMHOSE-BRZ-13IBK","price":349.95,"currency_code":"AUD","in_stock":true},{"title":"Blue","offer_id":53000308457765,"sku":"MMHOSE-BRZ-13IBL","price":349.95,"currency_code":"AUD","in_stock":true},{"title":"Red","offer_id":53000308490533,"sku":"MMHOSE-BRZ-13IRD","price":349.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMHOSE-BRZ-13IBK_1.jpg?v=1785908475"},{"product_id":"mishimoto-baffled-oil-catch-can-subaru-brz-zc6-toyota-86","title":"Mishimoto Baffled Oil Catch Can - Subaru BRZ (ZC6) \/ Toyota 86","description":"\u003ch2\u003eMishimoto Baffled Oil Catch Can - Subaru BRZ (ZC6) \/ Toyota 86\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto has spent thousands of test miles logging blow by behaviour on the FA20 to work out exactly where oil accumulation happens. The result is this baffled catch can kit for the \u003cstrong\u003eSubaru BRZ\u003c\/strong\u003e and \u003cstrong\u003eToyota 86\u003c\/strong\u003e, positioned on the PCV side of the crankcase vent system where Mishimoto found the vast majority of oil actually collects. SKU MMBCC-BRZ-13PBE.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eSubaru BRZ (ZC6)\u003c\/strong\u003e and \u003cstrong\u003eToyota 86 (ZN6)\u003c\/strong\u003e, including GT, GTS and GTS PP variants. The kit uses a direct fit bracket engineered to suit right hand drive layouts, so no fabrication is needed.\u003c\/p\u003e\n\n\u003ch3\u003eKit Contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMishimoto 2-Port Compact Baffled Oil Catch Can with bronze filter\u003c\/li\u003e\n\u003cli\u003eInternal baffling to separate oil from crankcase vapours\u003c\/li\u003e\n\u003cli\u003eDirect fit mounting bracket, RHD compatible\u003c\/li\u003e\n\u003cli\u003eTwo direct fit hoses for the 10mm PCV valve and 12mm intake manifold port\u003c\/li\u003e\n\u003cli\u003eTwo CNC machined aluminium barb fittings\u003c\/li\u003e\n\u003cli\u003eMishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, OEM part numbers and fitment notes are provided in the tabs above. Please confirm your vehicle's model and configuration before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this kit suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":53000310489381,"sku":"MMBCC-BRZ-13PBE","price":459.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/300-MMBCC-BRZ-13PBE_1.jpg?v=1785908487"},{"product_id":"mishimoto-baffled-oil-catch-can-kit-subaru-brz-zd8-toyota-gr86-zn8","title":"Mishimoto Baffled Oil Catch Can Kit - Subaru BRZ (ZD8) \/ Toyota GR86 (ZN8)","description":"\u003ch2\u003eMishimoto Baffled Oil Catch Can Kit - Subaru BRZ (ZD8) \/ Toyota GR86 (ZN8)\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto's baffled oil catch can kit tackles blow-by before it fouls your intake tract. Built for the FA24 engine's combined direct and port injection setup, it captures oil, fuel and water vapour that would otherwise condense on sensors or find its way back into the cylinders, helping guard against knock and power loss in the \u003cstrong\u003eSubaru BRZ\u003c\/strong\u003e and \u003cstrong\u003eToyota GR86\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eSubaru BRZ (ZD8)\u003c\/strong\u003e and \u003cstrong\u003eToyota GR86 (ZN8)\u003c\/strong\u003e, SKU MMBCC-BRZ-22.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e this kit is engineered for left hand drive vehicles only. It will not fit right hand drive BRZ or GR86 models due to interference with the brake lines. Confirm your vehicle's drive configuration before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eKit Contents and Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCompact 2-port baffled oil catch can with bronze filter and internal air turbulators\u003c\/li\u003e\n\u003cli\u003e3mm thick steel mounting bracket to isolate the can from engine vibration\u003c\/li\u003e\n\u003cli\u003eMolded hoses for a direct fit connection between the catch can, engine and intake manifold\u003c\/li\u003e\n\u003cli\u003eTwo O-ring sealed, CNC machined aluminium fittings for a leak free install\u003c\/li\u003e\n\u003cli\u003eWorm gear clamps rated to 2.5 Nm recommended torque (18 to 27 in-lb \/ 2 to 3 Nm range, do not exceed 3 Nm)\u003c\/li\u003e\n\u003cli\u003eMishimoto recommends checking catch can contents every 1600 km until a baseline is established\u003c\/li\u003e\n\u003cli\u003eBacked by the Mishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility, part numbers and fitment notes are provided in the tabs above. Please confirm your vehicle's drive configuration and model year before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this kit suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":53000310587685,"sku":"MMBCC-BRZ-22","price":559.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMBCC-BRZ-22_1.jpg?v=1785908496"},{"product_id":"mishimoto-performance-thermostat-mitsubishi-lancer-evolution-x-cz4a-68c","title":"Mishimoto Performance Thermostat - Mitsubishi Lancer Evolution X (CZ4A) - 68C","description":"\u003ch2\u003eMishimoto Performance Thermostat - Mitsubishi Lancer Evolution X (CZ4A) - 68C\/155F\u003c\/h2\u003e\n\n\u003cp\u003eMishimoto builds cooling components with one goal in mind: keeping engine temperatures in check when the factory setup starts to struggle. The \u003cstrong\u003eMishimoto Performance Thermostat\u003c\/strong\u003e is designed for owners running modified or turbo upgraded \u003cstrong\u003eMitsubishi Lancer Evolution X\u003c\/strong\u003e applications where extra heat needs somewhere to go. SKU MMTS-EVO-10L.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eMitsubishi Lancer Evolution X\u003c\/strong\u003e (\u003cstrong\u003eCZ4A\u003c\/strong\u003e). By opening at 68C (155F) rather than the factory 82C setting, it allows coolant to start circulating earlier and keeps overall engine temperatures lower once fully warmed up, which is particularly useful under sustained load or track conditions.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOpening temperature: 68C (155F)\u003c\/li\u003e\n\u003cli\u003eStandard\/OEM opening temperature for comparison: 82C\u003c\/li\u003e\n\u003cli\u003eDirect fitment replacement thermostat\u003c\/li\u003e\n\u003cli\u003eDesigned for improved cooling response in modified and turbo upgraded applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle compatibility and fitment notes are provided in the tabs above. Please confirm your vehicle's year and configuration before ordering.\u003c\/p\u003e\n\n\u003cp\u003eNot sure if this suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":53022078140709,"sku":"MMTS-EVO-10L","price":144.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/MMTS-EVO-10L_1.jpg?v=1785984470"}],"url":"https:\/\/www.chicaneaustralia.com.au\/collections\/mishimoto.oembed","provider":"Chicane Australia","version":"1.0","type":"link"}