{"title":"Fuel Cells and Accessories","description":"\u003ch2\u003eFuel Cells and Accessories\u003c\/h2\u003e\n\u003cp\u003eThis collection covers Radium Engineering fuel cells and the hardware that completes them: fillers and caps, roll over valves, dry break fittings, sender plates, gaskets, replacement cans and bladders, and mounting kits. These parts sit within our \u003ca href=\"https:\/\/www.chicaneaustralia.com.au\/collections\/fuel-system\"\u003eFuel System\u003c\/a\u003e range and suit competition builds where the factory tank is replaced or upgraded. Most items are universal, so the right choice depends on your cell's size, bolt pattern and port sizes rather than your car.\u003c\/p\u003e\n\n\u003cdetails\u003e\u003csummary\u003eShop by Product Type\u003c\/summary\u003e\n\u003cul\u003e\n\u003cli\u003eFuel cells, including the Radium Engineering RA-Series Fuel Cell (FIA-FT3 Certified)\u003c\/li\u003e\n\u003cli\u003eReplacement fuel cell cans (including a 22 gallon option) and replacement bladders for RA-Series cells\u003c\/li\u003e\n\u003cli\u003eRemote mount fillers, swing valve filler caps and FCST filler adapters (6-bolt to 3-bolt)\u003c\/li\u003e\n\u003cli\u003eRoll over valves, Dynamic Safety Valves (DSV), DSV extension adapters and fuel cell vent kits\u003c\/li\u003e\n\u003cli\u003eDry break fittings, including a 1.5\" male PRV and a 1\" probe restrictor\u003c\/li\u003e\n\u003cli\u003eFuel level senders, sender gaskets, 5-bolt SAE block-off plates and fuel level gauge mounts\u003c\/li\u003e\n\u003cli\u003eFuel cell gaskets, weld flanges and nut rings\u003c\/li\u003e\n\u003cli\u003eDry carbon fibre fuel cell lids\u003c\/li\u003e\n\u003cli\u003eMounting hardware: weld-in cages, mounting tab kits, spare tyre well mounting kits and saddle tank conversion kits\u003c\/li\u003e\n\u003cli\u003eFuel vent charcoal canister service kits and fuel tank pressure plugs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo complete the system, see \u003ca href=\"https:\/\/www.chicaneaustralia.com.au\/collections\/fuel-pumps\"\u003efuel pumps\u003c\/a\u003e, \u003ca href=\"https:\/\/www.chicaneaustralia.com.au\/collections\/fuel-surge-tanks\"\u003efuel surge tanks\u003c\/a\u003e, \u003ca href=\"https:\/\/www.chicaneaustralia.com.au\/collections\/fuel-pump-hangers\"\u003efuel pump hangers\u003c\/a\u003e, \u003ca href=\"https:\/\/www.chicaneaustralia.com.au\/collections\/fuel-line-kits\"\u003efuel line kits\u003c\/a\u003e, \u003ca href=\"https:\/\/www.chicaneaustralia.com.au\/collections\/fuel-filters\"\u003efuel filters\u003c\/a\u003e, \u003ca href=\"https:\/\/www.chicaneaustralia.com.au\/collections\/fuel-pressure-regulators\"\u003efuel pressure regulators\u003c\/a\u003e, \u003ca href=\"https:\/\/www.chicaneaustralia.com.au\/collections\/refuelling-equipment\"\u003erefuelling equipment\u003c\/a\u003e and \u003ca href=\"https:\/\/www.chicaneaustralia.com.au\/collections\/fuel-system-accessories\"\u003efuel system accessories\u003c\/a\u003e. You can browse every brand we carry on our \u003ca href=\"https:\/\/www.chicaneaustralia.com.au\/pages\/brands\"\u003ebrands page\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eChoosing the Right Part\u003c\/summary\u003e\n\u003cp\u003eMatch accessories to your cell, not your car. Before ordering, confirm these details:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCell capacity:\u003c\/strong\u003e Some parts are size-specific, such as the 10\/14 gallon carbon fibre lid and the 22 gallon replacement can.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlate bolt pattern and size:\u003c\/strong\u003e Examples include the 24-bolt \/ 6x10in fuel cell gasket, 5-bolt sender plates and gaskets, and 6-bolt to 3-bolt FCST filler adapters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort thread and outlet size:\u003c\/strong\u003e Roll over valves come in 12AN ORB to 8AN male and 10AN ORB to 19mm barb versions, and the DSV is 12AN ORB to 12AN male.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCell depth:\u003c\/strong\u003e Deep cells may need the FCST lift pump extension (203mm add-on).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicle-specific items:\u003c\/strong\u003e A small number of parts are made for one car, such as the fuel tank pressure plug for the Mitsubishi Lancer Evolution X (CZ4A).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you compete, check your category's regulations for fuel cell, venting and roll over valve requirements before you buy.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eInstallation \u0026amp; What You'll Need\u003c\/summary\u003e\n\u003cp\u003eInstallation by a professional is recommended. Follow the manufacturer's instructions for sealing plates and gaskets, and tighten fasteners evenly in a cross pattern so the plate doesn't distort.\u003c\/p\u003e\n\u003cp\u003ePlan for the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAN spanners\u003c\/li\u003e\n\u003cli\u003eA fuel-rated thread sealant where tapered threads are used\u003c\/li\u003e\n\u003cli\u003eFresh O-rings or crush washers on reassembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePressure test anything that carries fuel before the car is used. Race fuel cells and their plumbing are generally intended for competition vehicles, so check your build against state road rules before fitting anything to a registered car.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cdetails\u003e\u003csummary\u003eFAQ\u003c\/summary\u003e\n\u003cp\u003e\u003cstrong\u003eWill these accessories fit any brand of fuel cell?\u003c\/strong\u003e\u003cbr\u003eNot automatically. Bolt patterns and port sizes vary between manufacturers, so check the bolt circle, plate size and thread size on your cell before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre these parts compatible with E85 or methanol?\u003c\/strong\u003e\u003cbr\u003eFuel compatibility varies by product. Check the individual listing or ask our team before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a roll over valve?\u003c\/strong\u003e\u003cbr\u003eRoll over protection is an important part of a vented fuel cell. Check your category's regulations for the specific requirements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you ship Australia-wide?\u003c\/strong\u003e\u003cbr\u003eYes, we ship to every state and territory, including regional addresses.\u003c\/p\u003e\n\u003c\/details\u003e\n\n\u003cp\u003eNeed help choosing? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n \"@context\": \"https:\/\/schema.org\",\n \"@type\": \"CollectionPage\",\n \"name\": \"Fuel Cells and Accessories\",\n \"url\": \"https:\/\/www.chicaneaustralia.com.au\/collections\/fuel-cell-accessories\",\n \"isPartOf\": {\n \"@type\": \"WebSite\",\n \"name\": \"Chicane Australia\",\n \"url\": \"https:\/\/www.chicaneaustralia.com.au\"\n }\n}\n\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n \"@context\": \"https:\/\/schema.org\",\n \"@type\": \"BreadcrumbList\",\n \"itemListElement\": [\n {\n \"@type\": \"ListItem\",\n \"position\": 1,\n \"name\": \"Home\",\n \"item\": \"https:\/\/www.chicaneaustralia.com.au\"\n },\n {\n \"@type\": \"ListItem\",\n \"position\": 2,\n \"name\": \"Fuel System\",\n \"item\": \"https:\/\/www.chicaneaustralia.com.au\/collections\/fuel-system\"\n },\n {\n \"@type\": \"ListItem\",\n \"position\": 3,\n \"name\": \"Fuel Cells and Accessories\",\n \"item\": \"https:\/\/www.chicaneaustralia.com.au\/collections\/fuel-cell-accessories\"\n }\n ]\n}\n\u003c\/script\u003e\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n \"@context\": \"https:\/\/schema.org\",\n \"@type\": \"FAQPage\",\n \"mainEntity\": [\n {\n \"@type\": \"Question\",\n \"name\": \"Will these accessories fit any brand of fuel cell?\",\n \"acceptedAnswer\": {\n \"@type\": \"Answer\",\n \"text\": \"Not automatically. Bolt patterns and port sizes vary between manufacturers, so check the bolt circle, plate size and thread size on your cell before ordering.\"\n }\n },\n {\n \"@type\": \"Question\",\n \"name\": \"Are these parts compatible with E85 or methanol?\",\n \"acceptedAnswer\": {\n \"@type\": \"Answer\",\n \"text\": \"Fuel compatibility varies by product. Check the individual listing or ask our team before ordering.\"\n }\n },\n {\n \"@type\": \"Question\",\n \"name\": \"Do I need a roll over valve?\",\n \"acceptedAnswer\": {\n \"@type\": \"Answer\",\n \"text\": \"Roll over protection is an important part of a vented fuel cell. Check your category's regulations for the specific requirements.\"\n }\n },\n {\n \"@type\": \"Question\",\n \"name\": \"Do you ship Australia-wide?\",\n \"acceptedAnswer\": {\n \"@type\": \"Answer\",\n \"text\": \"Yes, we ship to every state and territory, including regional addresses.\"\n }\n }\n ]\n}\n\u003c\/script\u003e","products":[{"product_id":"radium-engineering-fuel-tank-pressure-plug-mitsubishi-evo-x","title":"Radium Engineering Fuel Tank Pressure Plug - Mitsubishi Lancer Evolution X (CZ4A)","description":"\u003ch2\u003eRadium Engineering Fuel Tank Pressure Plug - Mitsubishi Lancer Evolution X (CZ4A)\u003c\/h2\u003e\u003cp\u003eThis Radium Engineering plug (SKU 20-0421) blocks off the fuel tank pressure sensor port on the top plate of the Radium Evo X fuel pump hanger. It is needed when the hanger goes into a car that did not come with an OEM fuel tank pressure sensor, which is common on vehicles sold outside North America.\u003c\/p\u003e\u003cp\u003eThe black anodised aluminium plug gives a clean, leak-free seal, suits all fuel types including E85, ethanol and methanol, and fits with two button head screws.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Suits Radium Evo X fuel pump hangers only. Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBlocks the unused pressure sensor port on the hanger top plate\u003c\/li\u003e\n\u003cli\u003eIdeal for non-North American vehicles without the OEM sensor\u003c\/li\u003e\n\u003cli\u003eBlack anodised aluminium\u003c\/li\u003e\n\u003cli\u003eCompatible with all fuel types including E85\u003c\/li\u003e\n\u003cli\u003eNo permanent modifications required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fuel-pump-hanger-mitsubishi-evo-x\"\u003eRadium Engineering Fuel Pump Hanger - Mitsubishi Lancer Evolution X (CZ4A)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fuel-return-kit-mitsubishi-evo-x\"\u003eRadium Engineering Fuel Return Kit - Mitsubishi Lancer Evolution X (CZ4A)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fuel-surge-tank-install-kit-mitsubishi-evo-x\"\u003eRadium Engineering Fuel Surge Tank Install Kit - Mitsubishi Lancer Evolution X (CZ4A)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fuel-hanger-feed-kit-mitsubishi-evo-x\"\u003eRadium Engineering Fuel Hanger Feed Kit - Mitsubishi Lancer Evolution X (CZ4A)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50354596282661,"sku":"20-0421","price":34.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/20-0421.jpg?v=1743646972"},{"product_id":"radium-ra-series-fuel-cell","title":"Radium Engineering RA-Series Fuel Cell (FIA-FT3 Certified) - Universal","description":"\u003ch2\u003eRadium Engineering RA-Series Fuel Cell (FIA-FT3 Certified) - Universal\u003c\/h2\u003e\u003cp\u003eRadium Engineering RA-Series fuel cells are competition fuel cells built to the safety requirements of the FIA and SFI, suiting road racing, time attack, drifting, rally, off-road and endurance use. At their heart is a seamless polymer bladder that resists all fuel types, including petrol, diesel, AV gas, E15, E85, ethanol and methanol.\u003c\/p\u003e\u003ch3\u003eVideo\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eRadium Engineering Competition Fuel Cells\u003c\/strong\u003e\u003c\/p\u003e\u003cdiv style=\"position:relative;width:100%;max-width:720px;aspect-ratio:16\/9;margin:0 0 1em;\"\u003e\u003ciframe src=\"https:\/\/www.youtube-nocookie.com\/embed\/mYxcGAJLjF0\" title=\"Radium Engineering Competition Fuel Cells\" style=\"position:absolute;inset:0;width:100%;height:100%;border:0;\" loading=\"lazy\" allow=\"accelerometer; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003eThe bladder is filled with explosion-suppressing anti-slosh foam and housed in a powder-coated aluminium enclosure, with an anodised aluminium nut ring for pump installation and a removable inspection plate. Every cell is serialised and supplied with FIA and SFI certification paperwork, valid for five years from manufacture. Use the variant selector to choose the capacity: 6 gallon (SKU 20-0606), 10 gallon (20-0610), 10.5 gallon (20-0611), 14 gallon (20-0614) or 22 gallon (20-0622).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Fuel cell surge tanks (FCST \/ FCST-X), pump systems, weld-in cages, lids and other accessories are sold separately. Fuel cells are built to order and all fuel cell sales are final, so please confirm size and fitment before ordering. Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-cell-vent-kits\"\u003eRadium Engineering Fuel Cell Vent Kit (Roll-Over Protection) - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fcst-x-fuel-cell-surge-tank-universal\"\u003eRadium Engineering FCST-X Fuel Cell Surge Tank - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-complete-refueling-kit-direct-mount-standard-fill\"\u003eRadium Engineering Complete Refueling Kit (Direct Mount Standard Fill) - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-level-senders\"\u003eRadium Engineering Fuel Level Sender - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-dry-carbon-fibre-fuel-cell-lid-universal\"\u003eRadium Engineering Dry Carbon Fibre Fuel Cell Lid - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"6 Gallon (22.7L)","offer_id":50524079653157,"sku":"20-0606","price":1660.0,"currency_code":"AUD","in_stock":true},{"title":"10 Gallon (37.9L)","offer_id":50524079685925,"sku":"20-0610","price":1818.0,"currency_code":"AUD","in_stock":true},{"title":"10.5 Gallon (39.7L)","offer_id":50524079718693,"sku":"20-0611","price":2174.0,"currency_code":"AUD","in_stock":true},{"title":"14 Gallon (53.0L)","offer_id":50524079751461,"sku":"20-0614","price":1976.0,"currency_code":"AUD","in_stock":true},{"title":"22 Gallon (83.3L)","offer_id":50524079784229,"sku":"20-0622","price":2372.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/Radium_Cells_x4_4e352b76-ceef-4adc-bf21-bddc46aadbed.jpg?v=1747889653"},{"product_id":"radium-fuel-cell-mounting-tab-kit","title":"Radium Engineering Fuel Cell Mounting Tab Kit - Universal","description":"\u003ch2\u003eRadium Engineering Fuel Cell Mounting Tab Kit - Universal\u003c\/h2\u003e\u003cp\u003eThis Radium Engineering mounting tab kit (SKU 20-0155) adds support for fuel cells using an industry-standard 6x10in, 24-bolt fill plate. Where original tabs use only four or six bolts, this two-piece design uses 12 fill plate bolts to spread the load evenly across the fuel cell – important when several fill plate accessories are fitted.\u003c\/p\u003e\u003cp\u003eThe tabs are laser cut from lightweight 5052 aluminium and black anodised, and 36 black sealing washers are supplied for the fill plate and tab mounting points.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Suits older Radium FCST models (20-014X-XX, 20-049X-XX) and third-party 6x10 24-bolt fuel cells such as FuelSafe, ATL, Jaz, Harmon and Pyrotect. Not compatible with the newer Radium FCST (20-099X-XX) or FCST-X, and not required for Radium RA-Series fuel cells. Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-ra-series-fuel-cell\"\u003eRadium Engineering RA-Series Fuel Cell (FIA-FT3 Certified) - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-cell-weld-in-cages\"\u003eRadium Engineering Fuel Cell Weld-In Cage - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50524079915301,"sku":"20-0155","price":52.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/20-0155_Installed.jpg?v=1747896097"},{"product_id":"radium-fuel-cell-weld-in-cages","title":"Radium Engineering Fuel Cell Weld-In Cage - Universal","description":"\u003ch2\u003eRadium Engineering Fuel Cell Weld-In Cage - Universal\u003c\/h2\u003e\u003cp\u003eRadium Engineering weld-in cages are pre-fabricated cradles that speed up installation of a Radium \u003cstrong\u003eRA-Series fuel cell\u003c\/strong\u003e and hold it securely for motorsport use. The main hoop and lower supports are stainless steel for corrosion resistance, and the upper straps are anodised, laser-etched aluminium.\u003c\/p\u003e\u003ch3\u003eVideo\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eRadium Engineering Competition Fuel Cells\u003c\/strong\u003e\u003c\/p\u003e\u003cdiv style=\"position:relative;width:100%;max-width:720px;aspect-ratio:16\/9;margin:0 0 1em;\"\u003e\u003ciframe src=\"https:\/\/www.youtube-nocookie.com\/embed\/mYxcGAJLjF0\" title=\"Radium Engineering Competition Fuel Cells\" style=\"position:absolute;inset:0;width:100%;height:100%;border:0;\" loading=\"lazy\" allow=\"accelerometer; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003eChoose the cage to match your cell size from the variant selector: 6 gallon (SKU 20-0906), 10 gallon (20-0910), 14 gallon (20-0914, also suits discontinued 15 gallon cells) or 22 gallon (20-0922).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e For Radium RA-Series fuel cells only; not compatible with other brands or dimensions. Welding is required, and proper precautions must be taken when welding stainless steel to mild steel. Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-ra-series-fuel-cell\"\u003eRadium Engineering RA-Series Fuel Cell (FIA-FT3 Certified) - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-cell-mounting-tab-kit\"\u003eRadium Engineering Fuel Cell Mounting Tab Kit - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"6 Gallon (22.7L)","offer_id":50524081422629,"sku":"20-0906","price":999.0,"currency_code":"AUD","in_stock":true},{"title":"10 Gallon (37.9L)","offer_id":50524081455397,"sku":"20-0910","price":1047.0,"currency_code":"AUD","in_stock":true},{"title":"14 Gallon (53.0L)","offer_id":50524081488165,"sku":"20-0914","price":1099.0,"currency_code":"AUD","in_stock":true},{"title":"22 Gallon (83.3L)","offer_id":50524081520933,"sku":"20-0922","price":1199.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/20-0906.jpg?v=1747891783"},{"product_id":"radium-dry-carbon-fibre-fuel-cell-lids","title":"Radium Engineering Dry Carbon Fibre Fuel Cell Lid - 10\/14 Gallon","description":"\u003ch2\u003eRadium Engineering Dry Carbon Fibre Fuel Cell Lid - 10\/14 Gallon\u003c\/h2\u003e\n\n\u003cp\u003eRadium Engineering builds fuel system components trusted by tuners and race teams worldwide, and this dry carbon fibre lid is a prime example of that motorsport-focused engineering. Designed as a premium upgrade for the \u003cstrong\u003eRadium RA-Series fuel cell\u003c\/strong\u003e, it replaces the standard powdercoated aluminium lid with a significantly lighter alternative — 68% lighter, to be exact — making it a straightforward win for any weight-sensitive circuit or endurance build.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the dry carbon fibre lid for the \u003cstrong\u003eRadium Engineering 10-gallon RA-Series\u003c\/strong\u003e and \u003cstrong\u003e14-gallon RA-Series\u003c\/strong\u003e fuel cells (part number \u003cstrong\u003e13-0410-01\u003c\/strong\u003e). The discontinued \u003cstrong\u003e15-gallon RA-Series\u003c\/strong\u003e fuel cell is also compatible with this part number.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e This lid is only compatible with RA-Series fuel cells — it cannot be exchanged for the standard aluminium lid. If ordered alongside a fuel cell, this lid ships in a separate box and requires end-user installation. Do not overtighten the mounting bolts as excessive torque can crack the carbon fibre resin and will not be covered under warranty.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003eDirect replacement for the standard powdercoated aluminium RA-Series lid — no cutting or fabrication required\u003c\/li\u003e\n \u003cli\u003e68% lighter than the standard aluminium lid\u003c\/li\u003e\n \u003cli\u003eManufactured from pre-impregnated 3K filament, 2x2 twill weave dry carbon fibre\u003c\/li\u003e\n \u003cli\u003eSame construction standard used in high-end motorsport bodywork and structural components\u003c\/li\u003e\n \u003cli\u003eCompatible with 10-gallon, 14-gallon, and discontinued 15-gallon RA-Series fuel cells\u003c\/li\u003e\n \u003cli\u003eManufactured in the USA to motorsport-grade tolerances\u003c\/li\u003e\n \u003cli\u003eHardware installed using a 4mm (5\/32 in) Allen key and 7\/16 in wrench for perimeter flange nuts\u003c\/li\u003e\n \u003cli\u003eInspection plate secured with Phillips head screws — use a micro screwdriver\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eCompatibility details and fitment notes are provided in the tabs above. Please confirm your fuel cell model and capacity before ordering.\u003c\/p\u003e\n\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-ra-series-fuel-cell\"\u003eRadium Engineering RA-Series Fuel Cell (FIA-FT3 Certified) - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-cell-gasket-6x10in-24-bolt\"\u003eRadium Engineering Fuel Cell Gasket (24-Bolt \/ 6x10in) - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-cell-nut-ring-black-anodised\"\u003eRadium Engineering Fuel Cell Nut Ring (Black Anodised) - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-cell-vent-kits\"\u003eRadium Engineering Fuel Cell Vent Kit (Roll-Over Protection) - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot sure if this lid suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"10\/14 Gallon","offer_id":50524081619237,"sku":"13-0410-01","price":698.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/13-0410-01.jpg?v=1775800571"},{"product_id":"radium-fuel-cell-vent-kits","title":"Radium Engineering Fuel Cell Vent Kit (Roll-Over Protection) - Universal","description":"\u003ch2\u003eRadium Engineering Fuel Cell Vent Kit (Roll-Over Protection) - Universal\u003c\/h2\u003e\u003cp\u003eRadium Engineering Fuel Cell Vent Kits let a fuel cell breathe: air escapes as the cell is filled, and filtered air is drawn in as fuel is used, so the tank never pressurises or pulls a vacuum in normal operation. They also pair well with Radium's fuel vent charcoal canister kits.\u003c\/p\u003e\u003cp\u003eChoose the size with the variant selector. The 8AN kit (SKU 20-0484-08) suits standard-fill systems with direct or remote fill necks, uses 1\/2in ID vent hose and fits the standard vent fitting supplied with Radium FCSTs. The high-flow 12AN kit (SKU 20-0484-12) suits quick-fill systems using a dry break and dump can, uses 3\/4in ID vent hose and works with the Radium 20-0462 DSV.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The 8AN kit requires an 8AN male vent fitting on the fuel cell; the 12AN kit requires a 12AN male vent fitting. Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-roll-over-valve-universal-12an-orb-to-8an-male\"\u003eRadium Engineering Roll Over Valve - Universal - 12AN ORB to 8AN Male\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-ra-series-fuel-cell\"\u003eRadium Engineering RA-Series Fuel Cell (FIA-FT3 Certified) - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Fuel Cell Vent Kit, 8AN","offer_id":50524081750309,"sku":"20-0484-08","price":104.99,"currency_code":"AUD","in_stock":true},{"title":"Fuel Cell Vent Kit, 12AN","offer_id":50524081783077,"sku":"20-0484-12","price":104.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/20-0484-08Updated.jpg?v=1747889272"},{"product_id":"radium-spare-tire-fuel-cell-mounting-kit","title":"Radium Engineering Spare Tire Fuel Cell Mounting Kit - Universal","description":"\u003ch2\u003eRadium Engineering Spare Tire Fuel Cell Mounting Kit - Universal\u003c\/h2\u003e\u003cp\u003eThis Radium Engineering bracket kit is a simple, secure way to mount a fuel cell in a vehicle's spare tyre well. It is designed for the Radium RA-Series Spare Tire Fuel Cell and other similarly sized cells.\u003c\/p\u003e\u003cp\u003eBecause spare tyre wells vary from vehicle to vehicle, slotted holes give up to 15mm (0.6in) of height adjustment. Two sets of rivet nuts come pre-installed in the powder-coated aluminium brackets – one for quick fuel cell removal and one for height adjustment – and adhesive foam and all hardware are included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Review the product dimensions and measure your spare tyre well to confirm fitment before ordering. The fuel cell is sold separately. Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-ra-series-fuel-cell\"\u003eRadium Engineering RA-Series Fuel Cell (FIA-FT3 Certified) - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-cell-vent-kits\"\u003eRadium Engineering Fuel Cell Vent Kit (Roll-Over Protection) - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50524081979685,"sku":"20-0931","price":628.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/20-0931.jpg?v=1747889056"},{"product_id":"radium-fuel-level-senders","title":"Radium Engineering Fuel Level Sender - Universal","description":"\u003ch2\u003eRadium Engineering Fuel Level Sender - Universal\u003c\/h2\u003e\u003cp\u003eThe Radium Engineering fuel level sender uses the industry-standard SAE 5-bolt mounting pattern found on all Radium fuel cell surge tanks (FCST and FCST-X). A sealed 304 stainless steel probe with a magnetic float gives accurate readings in petrol, diesel, water and all alcohol fuels including methanol, ethanol and E85.\u003c\/p\u003e\u003cp\u003eOutput is 0 ohms empty to 90 ohms full, which suits most aftermarket gauges, and it connects via 460mm (18in) PVC-coated leads with a Deutsch DT 2-pin connector. Use the variant selector to choose the length and style: 20-0747-297 is an 11.7in non-shrouded sender, while 20-0847-203 (8.0in) and 20-0847-297 (11.7in) are shrouded versions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Shrouded senders (40mm shroud) only suit newer FCST (20-099X-XX) and FCST-X (20-199X-XX) units; the non-shrouded sender suits all Radium FCST and FCST-X part numbers, including older 20-049X-XX and 20-069X-XX. A signal converter may be needed to drive an OEM gauge. To test, measure resistance across the leads while tipping the unit – it should read 0–90 ohms. Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-52mm-fuel-level-gauge-universal-0-90-ohm\"\u003eRadium Engineering 52mm Fuel Level Gauge - Universal - 0-90 Ohm\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fuel-level-gauge-mount-universal\"\u003eRadium Engineering Fuel Level Gauge Mount - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-ra-series-fuel-cell\"\u003eRadium Engineering RA-Series Fuel Cell (FIA-FT3 Certified) - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"11.7in","offer_id":50524082569509,"sku":"20-0747-297","price":198.0,"currency_code":"AUD","in_stock":true},{"title":"8.0in, Shrouded","offer_id":50524082602277,"sku":"20-0847-203","price":174.99,"currency_code":"AUD","in_stock":true},{"title":"11.7in, Shrouded","offer_id":50524082635045,"sku":"20-0847-297","price":174.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/20-0847-297.jpg?v=1747888210"},{"product_id":"radium-fuel-level-sender-block-off-plate","title":"Radium Engineering Fuel Level Sender Block-Off Plate (5-Bolt SAE) - Universal","description":"\u003ch2\u003eRadium Engineering Fuel Level Sender Block-Off Plate (5-Bolt SAE) - Universal\u003c\/h2\u003e\u003cp\u003eThe Radium Engineering 20-0146 Block-Off Kit seals an unused 5-bolt SAE fuel level sender port when a level sensor is not required. It is widely used on Radium FCST and FCST-X fuel cell surge tanks and also suits many other aftermarket fuel cells using the standard SAE 5-bolt pattern, including ATL, Fuel Safe, Pyrotect, Harmon and Jaz.\u003c\/p\u003e\u003cp\u003eThe 1\/8\" anodised aluminium plate resists corrosion and seals with an FKM gasket and stainless steel 10-32 bolts for a secure, leak-free, vapour-tight finish.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Radium 20-049X-XX FCST units do not need the nylon sealing washers included in the kit. Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-ra-series-fuel-cell\"\u003eRadium Engineering RA-Series Fuel Cell (FIA-FT3 Certified) - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-12an-orb-to-5-bolt-sae-adapter\"\u003eRadium Engineering 12AN ORB to 5-Bolt SAE Adapter - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50524082700581,"sku":"20-0146","price":61.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/20-0146.jpg?v=1747887789"},{"product_id":"radium-fuel-cell-gasket-6x10in-24-bolt","title":"Radium Engineering Fuel Cell Gasket (24-Bolt \/ 6x10in) - Universal","description":"\u003ch2\u003eRadium Engineering Fuel Cell Gasket (24-Bolt \/ 6x10in) - Universal\u003c\/h2\u003e\u003cp\u003eThe Radium Engineering 18-0015 fuel cell gasket seals industry-standard 6 x 10in, 24-bolt fuel cell flanges. Rather than cork or paper, it is die-cut from a premium grade of FKM (fluoroelastomer), giving excellent resistance to fuel, ethanol, methanol and oil.\u003c\/p\u003e\u003cp\u003eAt 1\/16in (1.6mm) thick it is reusable, and it suits all Radium FCST and FCST-X fuel cell surge tanks as well as other 6 x 10in 24-bolt drop-ins.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Confirm your fuel cell flange size and bolt count before ordering. Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDie-cut premium FKM (Viton-type fluoroelastomer)\u003c\/li\u003e\n\u003cli\u003eIndustry-standard 6 x 10in, 24-bolt pattern\u003c\/li\u003e\n\u003cli\u003e1\/16in (1.6mm) thick\u003c\/li\u003e\n\u003cli\u003eReusable\u003c\/li\u003e\n\u003cli\u003eResistant to petrol, E85, ethanol, methanol and oil\u003c\/li\u003e\n\u003cli\u003eSuits all Radium fuel cell surge tanks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-ra-series-fuel-cell\"\u003eRadium Engineering RA-Series Fuel Cell (FIA-FT3 Certified) - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-cell-nut-ring-black-anodised\"\u003eRadium Engineering Fuel Cell Nut Ring (Black Anodised) - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-dry-carbon-fibre-fuel-cell-lid-universal\"\u003eRadium Engineering Dry Carbon Fibre Fuel Cell Lid - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50524082798885,"sku":"18-0015","price":69.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/18-0015n.jpg?v=1747887648"},{"product_id":"radium-fuel-cell-weld-flange-raw-aluminium-with-gasket","title":"Radium Engineering Fuel Cell Weld Flange (Raw Aluminium) - Universal","description":"\u003ch2\u003eRadium Engineering Fuel Cell Weld Flange (Raw Aluminium) - Universal\u003c\/h2\u003e\u003cp\u003eThis Radium Engineering weld flange provides the industry-standard 6 x 10in, 24-bolt mounting face for a custom aluminium fuel tank or fuel cell (SKU 20-0278). It suits Radium FCST and FCST-X fuel cell surge tanks and other standard 6 x 10in drop-ins.\u003c\/p\u003e\u003cp\u003eIt is CNC machined from 6061 billet aluminium, fly-cut to 0.24in thick and tapped for 1\/4in-28 fasteners. A reusable Radium FKM gasket (18-0015) is included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Welding must be carried out by an experienced welder to avoid warping the flange. Fuel cell not included. Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-cell-nut-ring-black-anodised\"\u003eRadium Engineering Fuel Cell Nut Ring (Black Anodised) - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-dry-carbon-fibre-fuel-cell-lid-universal\"\u003eRadium Engineering Dry Carbon Fibre Fuel Cell Lid - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-level-senders\"\u003eRadium Engineering Fuel Level Sender - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50524082864421,"sku":"20-0278","price":157.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/14-0284n.jpg?v=1747887592"},{"product_id":"radium-fuel-cell-nut-ring-black-anodised","title":"Radium Engineering Fuel Cell Nut Ring (Black Anodised) - Universal","description":"\u003ch2\u003eRadium Engineering Fuel Cell Nut Ring (Black Anodised) - Universal\u003c\/h2\u003e\u003cp\u003eThe Radium Engineering fuel cell nut ring (SKU 14-0584) provides the threaded clamping ring for industry-standard 6\" x 10\" 24-bolt fuel cell flanges. It is CNC-machined from 6061 aluminium and black anodised to resist corrosion and suit all fuel types, including E85 and alcohol blends.\u003c\/p\u003e\u003cp\u003eAll 24 holes are tapped 1\/4\"-28 in the standard 6x10 pattern. It was designed to bolt into Radium RA-series fuel cells but also suits other fuel cells using the same pattern, such as those fitted with a Radium FCST or FCST-X drop-in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The gasket is not included – Radium's reusable FKM 6x10 24-bolt gasket (18-0015) is sold separately. Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCNC-machined 6061 aluminium\u003c\/li\u003e\n\u003cli\u003eBlack anodised for corrosion resistance and fuel compatibility\u003c\/li\u003e\n\u003cli\u003eIndustry-standard 6\" x 10\" 24-bolt pattern\u003c\/li\u003e\n\u003cli\u003e1\/4\"-28 threaded holes\u003c\/li\u003e\n\u003cli\u003eDesigned for Radium RA-series fuel cells, suits other 6x10 cells\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-cell-gasket-6x10in-24-bolt\"\u003eRadium Engineering Fuel Cell Gasket (24-Bolt \/ 6x10in) - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-cell-weld-flange-raw-aluminium-with-gasket\"\u003eRadium Engineering Fuel Cell Weld Flange (Raw Aluminium) - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-dry-carbon-fibre-fuel-cell-lid-universal\"\u003eRadium Engineering Dry Carbon Fibre Fuel Cell Lid - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":50524082897189,"sku":"14-0584","price":104.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/14-0584.jpg?v=1747887511"},{"product_id":"radium-engineering-fcst-lift-pump-extension-universal-deep-fuel-cells-203mm-add-on","title":"Radium Engineering FCST Lift Pump Extension - Universal Deep Fuel Cells - 203mm Add-On","description":"\u003ch2\u003eRadium Engineering FCST Lift Pump Extension - Universal Deep Fuel Cells - 203mm Add-On\u003c\/h2\u003e\n\n\u003cp\u003eRadium Engineering builds fuel system components to genuine motorsport tolerances, and this lift pump extension is a straightforward solution for anyone running a deep fuel cell setup. If your cell exceeds 254mm (10 in) from the underside of the fill plate to the bottom of the filter sock, the standard \u003cstrong\u003eRadium FCST\u003c\/strong\u003e brackets simply won't reach — this kit fixes that.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the Radium Engineering FCST Lift Pump Extension, SKU \u003cstrong\u003e20-0214\u003c\/strong\u003e. It is a universal add-on designed for use with the \u003cstrong\u003eRadium Fuel Cell Surge Tank (FCST)\u003c\/strong\u003e system on deep fuel cells. No specific vehicle fitment applies — this suits any build where the fuel cell depth exceeds the standard bracket reach.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Cutting is required to achieve the correct length. Use a band saw or cut-off wheel to trim the brackets to suit your installation depth. Depending on how deep your cell is, longer hose and\/or wiring may also be needed — confirm your measurements before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003eExtends FCST lift pump reach by 203mm (8 in)\u003c\/li\u003e\n \u003cli\u003eStandard FCST bracket depth: up to 254mm (10 in)\u003c\/li\u003e\n \u003cli\u003eMaximum supported fuel cell depth with extension: up to 432mm (17 in)\u003c\/li\u003e\n \u003cli\u003e5052 aluminium construction — laser-cut, formed, bright-dipped, and Type-II anodized\u003c\/li\u003e\n \u003cli\u003eCompatible with E85, ethanol, methanol, pump petrol, and flex fuel setups\u003c\/li\u003e\n \u003cli\u003eCut-to-length design for a precise fit in your application\u003c\/li\u003e\n \u003cli\u003eManufactured to motorsport-grade tolerances\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFull compatibility details and installation notes are provided in the tabs above. Confirm your fuel cell depth and FCST configuration before ordering.\u003c\/p\u003e\n\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fcst-x-fuel-cell-surge-tank-universal\"\u003eRadium Engineering FCST-X Fuel Cell Surge Tank - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fcst-x-lift-pump-mounts-universal\"\u003eRadium Engineering FCST-X Lift Pump Mounts - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-ra-series-fuel-cell\"\u003eRadium Engineering RA-Series Fuel Cell (FIA-FT3 Certified) - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot sure if this kit suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":52425466249509,"sku":"20-0214","price":87.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/20-0214.jpg?v=1779664993"},{"product_id":"radium-engineering-roll-over-valve-universal-10an-orb-to-19mm-barb","title":"Radium Engineering Roll Over Valve - Universal - 10AN ORB to 19mm Barb","description":"\u003ch2\u003eRadium Roll Over Valve – 10AN ORB to 3\/4\" Barb\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eRadium Engineering\u003c\/strong\u003e Roll Over Valve is a safety-critical fitting for any build running an engine vent or oil catch can. CNC-machined from billet 6061 aluminium and sealed with FKM (Viton) o-rings, it provides reliable fluid containment if the vehicle ever inverts or rolls over. In normal upright operation, air flows freely in both directions for unobstructed crankcase venting. Rotate the fitting more than 90 degrees from upright and it shuts automatically, keeping oil where it belongs.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the Radium Engineering Roll Over Valve in a \u003cstrong\u003e10AN ORB to 3\/4\" barb\u003c\/strong\u003e configuration (SKU: 20-0594). It is designed for use on engine vents and catch can vents, and is compatible with the Radium Engineering Air Filter 19mm ID (P\/N: 18-0042, sold separately).\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e This valve must always be mounted in the vertical upright position for correct operation.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003eThread: 7\/8-14 UNF (10AN ORB)\u003c\/li\u003e\n \u003cli\u003eBarb OD: 19mm (3\/4 in)\u003c\/li\u003e\n \u003cli\u003eBody material: 6061 aluminium, Type-II anodised\u003c\/li\u003e\n \u003cli\u003eValve and retaining ring: stainless steel\u003c\/li\u003e\n \u003cli\u003eO-ring material: FKM (Viton) — compatible with E85, pump petrol, and oil\u003c\/li\u003e\n \u003cli\u003eManufactured in the USA to motorsport-grade tolerances\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eCompatibility and fitment notes are provided in the tabs above. Please confirm your catch can or engine vent configuration before ordering.\u003c\/p\u003e\n\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-cell-vent-kits\"\u003eRadium Engineering Fuel Cell Vent Kit (Roll-Over Protection) - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-ra-series-fuel-cell\"\u003eRadium Engineering RA-Series Fuel Cell (FIA-FT3 Certified) - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-an-orb-fitting-replacement-viton-o-ring-5-pack-universal\"\u003eRadium Engineering AN ORB Fitting Replacement Viton O-Ring 5 Pack - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot sure if this valve suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":52425921069349,"sku":"20-0594","price":43.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/20-0594.jpg?v=1779671264"},{"product_id":"radium-engineering-replacement-fuel-cell-bladders-radium-ra-series-universal","title":"Radium Engineering Replacement Fuel Cell Bladders - Radium RA-Series - Universal","description":"\u003ch2\u003eRadium Engineering Replacement Fuel Cell Bladders - Radium RA-Series - Universal\u003c\/h2\u003e\n\n\u003cp\u003eRadium Engineering is known for precision fuel system components built to handle the demands of motorsport. These replacement bladders are designed specifically for \u003cstrong\u003eRadium RA-Series fuel cells\u003c\/strong\u003e, offering a straightforward way to keep your fuel system compliant and operational when certifications lapse.\u003c\/p\u003e\n\u003ch3\u003eVideo\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eRadium Engineering Competition Fuel Cells\u003c\/strong\u003e\u003c\/p\u003e\u003cdiv style=\"position:relative;width:100%;max-width:720px;aspect-ratio:16\/9;margin:0 0 1em;\"\u003e\u003ciframe src=\"https:\/\/www.youtube-nocookie.com\/embed\/mYxcGAJLjF0\" title=\"Radium Engineering Competition Fuel Cells\" style=\"position:absolute;inset:0;width:100%;height:100%;border:0;\" loading=\"lazy\" allow=\"accelerometer; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\n\u003cp\u003eThis listing covers replacement bladders for the \u003cstrong\u003eRadium RA-Series\u003c\/strong\u003e fuel cell range. These are universal fitment items designed for use with Radium's own RA-Series cells.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e These bladders are intended as replacements for existing \u003cstrong\u003eRadium RA-Series\u003c\/strong\u003e fuel cells only. Confirm your cell model before ordering to ensure compatibility.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDirect replacement bladder for Radium RA-Series fuel cells\u003c\/li\u003e\n\u003cli\u003eSuitable for renewing expired SFI and FIA certification compliance\u003c\/li\u003e\n\u003cli\u003eMaintains the integrity and safety of your existing fuel cell setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eCompatibility details and fitment notes are provided in the tabs above. Please confirm your fuel cell model and certification requirements before ordering.\u003c\/p\u003e\n\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-ra-series-fuel-cell\"\u003eRadium Engineering RA-Series Fuel Cell (FIA-FT3 Certified) - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-cell-gasket-6x10in-24-bolt\"\u003eRadium Engineering Fuel Cell Gasket (24-Bolt \/ 6x10in) - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-replacement-fuel-cell-can-universal\"\u003eRadium Engineering Replacement Fuel Cell Can - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot sure if this suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"6 Gal","offer_id":52425976152357,"sku":"20-0646","price":733.99,"currency_code":"AUD","in_stock":true},{"title":"10 Gal","offer_id":52425976185125,"sku":"20-0650","price":803.99,"currency_code":"AUD","in_stock":true},{"title":"10.5 Gal - Spare Tyre","offer_id":52425976217893,"sku":"20-0651","price":803.99,"currency_code":"AUD","in_stock":true},{"title":"14 Gal","offer_id":52425976250661,"sku":"20-0654","price":821.99,"currency_code":"AUD","in_stock":true},{"title":"22 Gal","offer_id":52425976283429,"sku":"20-0662","price":873.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/20-0650_with_foam.jpg?v=1779672023"},{"product_id":"radium-engineering-roll-over-valve-universal-12an-orb-to-8an-male","title":"Radium Engineering Roll Over Valve - Universal - 12AN ORB to 8AN Male","description":"\u003ch2\u003eRadium Engineering Roll Over Valve - 12AN ORB to 8AN Male\u003c\/h2\u003e\n\n\u003cp\u003eRadium Engineering builds precision fuel system components trusted by professional race teams across the globe, and this roll over valve is a straightforward example of their no-compromise approach to motorsport safety. Machined in Washington State from aircraft-grade aluminium, it's built to perform reliably when it matters most.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the \u003cstrong\u003eRadium Engineering Roll Over Valve (SKU: 20-0934)\u003c\/strong\u003e, a universal gravity-activated safety valve suited to any fuel or fluid system requiring rollover protection. It is not vehicle-specific and can be integrated into custom fuel systems, vent lines, or wherever your racing series regulations require it.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Install in the correct orientation for gravity activation to function. Verify your specific racing series regulations for rollover valve placement and compliance requirements before installation.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003eInlet: 12AN ORB (O-Ring Boss) — leak-free o-ring seal\u003c\/li\u003e\n \u003cli\u003eOutlet: 8AN Male\u003c\/li\u003e\n \u003cli\u003eMaterial: 6061-T6 aluminium\u003c\/li\u003e\n \u003cli\u003eFinish: Black anodised — corrosion resistant\u003c\/li\u003e\n \u003cli\u003eActivation: Gravity-activated, closes automatically when inverted\u003c\/li\u003e\n \u003cli\u003eApplication: Fuel and fluid systems, motorsport and track use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eFitment and installation notes are provided in the tabs above. Confirm your fuel system configuration and racing series requirements before ordering.\u003c\/p\u003e\n\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-cell-vent-kits\"\u003eRadium Engineering Fuel Cell Vent Kit (Roll-Over Protection) - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-ra-series-fuel-cell\"\u003eRadium Engineering RA-Series Fuel Cell (FIA-FT3 Certified) - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-an-orb-fitting-replacement-viton-o-ring-5-pack-universal\"\u003eRadium Engineering AN ORB Fitting Replacement Viton O-Ring 5 Pack - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot sure if this valve suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":52426108141861,"sku":"20-0934","price":78.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/20-0934.jpg?v=1779674352"},{"product_id":"radium-engineering-replacement-fuel-cell-can-universal-22-gallon","title":"Radium Engineering Replacement Fuel Cell Can - Universal - 22 Gallon","description":"\u003ch2\u003eRadium Engineering Replacement Fuel Cell Can - 22 Gallon\u003c\/h2\u003e\n\n\u003cp\u003eRadium Engineering builds motorsport-grade fuel system components trusted by professional race and endurance teams. The \u003cstrong\u003e22 Gallon Replacement Fuel Cell Can\u003c\/strong\u003e is a direct fit aluminium shell designed to restore or upgrade an existing Radium fuel cell setup without any cutting or fabrication.\u003c\/p\u003e\n\n\u003cp\u003eThis listing covers the 83 L (22 US gal) replacement can, precision machined to Radium's motorsport tolerances to house internal fuel system components such as surge tanks, pumps and baffling from a compatible Radium fuel cell system.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This is a replacement shell only. It does not include internal fuel system components — surge tank, pump and baffling must be transferred from your existing Radium fuel cell or purchased separately.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCapacity: 83 L (22 US gal)\u003c\/li\u003e\n\u003cli\u003eConstruction: high quality aluminium for strength and corrosion resistance\u003c\/li\u003e\n\u003cli\u003ePrecision machined to Radium motorsport-grade tolerances\u003c\/li\u003e\n\u003cli\u003eDirect replacement shell for compatible Radium fuel cell systems\u003c\/li\u003e\n\u003cli\u003eCompatible with E85, pump petrol and flex fuel configurations\u003c\/li\u003e\n\u003cli\u003eBolt-on fitment — no cutting, drilling or fabrication required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eVehicle and system compatibility, along with fitment notes, are provided in the tabs above. Please confirm your existing Radium fuel cell configuration before ordering.\u003c\/p\u003e\n\n\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-ra-series-fuel-cell\"\u003eRadium Engineering RA-Series Fuel Cell (FIA-FT3 Certified) - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-replacement-fuel-cell-bladders-radium-ra-series-universal\"\u003eRadium Engineering Replacement Fuel Cell Bladders - Radium RA-Series - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot sure if this fuel cell can suits your build? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e for expert advice.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":52819449905445,"sku":"20-0682","price":1048.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/20-0682.jpg?v=1784518303"},{"product_id":"radium-engineering-dry-carbon-fibre-fuel-cell-lid-universal","title":"Radium Engineering Dry Carbon Fibre Fuel Cell Lid - Universal","description":"\u003ch2\u003eRadium Engineering Dry Carbon Fibre Fuel Cell Lid - Universal\u003c\/h2\u003e\u003cp\u003eThese optional dry carbon fibre lids suit Radium Engineering RA-Series fuel cells and are 68% lighter than the powder-coated aluminium lid supplied as standard (SKU 13-0406-01 \/ 13-0422-01 \/ 13-0411-01).\u003c\/p\u003e\u003cp\u003eUse the variant selector to choose the lid that matches your fuel cell: 6 Gallon, 22 Gallon or Spare Tyre Cell.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e When bought with a fuel cell, the carbon lid ships in a separate box and is fitted by the owner; the standard aluminium lid cannot be exchanged. Check with your racing organisation that carbon fibre is permitted for the fuel cell enclosure. Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDry carbon fibre construction\u003c\/li\u003e\n\u003cli\u003e68% lighter than the standard powder-coated aluminium lid\u003c\/li\u003e\n\u003cli\u003eSuits Radium RA-Series fuel cells\u003c\/li\u003e\n\u003cli\u003eAvailable for 6 gallon, 22 gallon and spare tyre cells\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-ra-series-fuel-cell\"\u003eRadium Engineering RA-Series Fuel Cell (FIA-FT3 Certified) - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-cell-gasket-6x10in-24-bolt\"\u003eRadium Engineering Fuel Cell Gasket (24-Bolt \/ 6x10in) - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-cell-nut-ring-black-anodised\"\u003eRadium Engineering Fuel Cell Nut Ring (Black Anodised) - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-cell-vent-kits\"\u003eRadium Engineering Fuel Cell Vent Kit (Roll-Over Protection) - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"6 Gallon","offer_id":53923963044133,"sku":"13-0406-01","price":393.99,"currency_code":"AUD","in_stock":true},{"title":"22 Gallon","offer_id":53923963076901,"sku":"13-0422-01","price":524.99,"currency_code":"AUD","in_stock":true},{"title":"Spare Tyre Cell","offer_id":53923963109669,"sku":"13-0411-01","price":480.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/13-0406-01.jpg?v=1790741263"},{"product_id":"radium-engineering-fuel-vent-charcoal-canister-service-kit-universal-compact","title":"Radium Engineering Fuel Vent Charcoal Canister Service Kit - Universal - Compact","description":"\u003ch2\u003eRadium Engineering Fuel Vent Charcoal Canister Service Kit - Universal - Compact\u003c\/h2\u003e\u003cp\u003eThis Radium Engineering service kit recharges the Compact fuel vent charcoal canister (20-1827). Over time the activated carbon can become saturated and filtration efficiency drops; the canister can simply be dismantled and refilled with fresh carbon and a new 150-micron strainer from this kit (SKU 20-1827-SK).\u003c\/p\u003e\u003cp\u003eServicing is not needed often – the interval depends on how the vehicle is used.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This kit suits the Compact canister (20-1827) only. The Standard (20-1828) and Canister Size (20-0828) versions use their own service kits (20-1828-SK and 20-0828-SK). Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-compact-fuel-vent-charcoal-canister-universal\"\u003eRadium Compact Fuel Vent Charcoal Canister - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53923994501413,"sku":"20-1827-SK","price":42.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/20-1827-SK.jpg?v=1790741581"},{"product_id":"radium-engineering-fcst-filler-adapter-universal-6-bolt-to-3-bolt","title":"Radium Engineering FCST Filler Adapter - Universal - 6-Bolt to 3-Bolt","description":"\u003ch2\u003eRadium Engineering FCST Filler Adapter - Universal - 6-Bolt to 3-Bolt\u003c\/h2\u003e\u003cp\u003eThis Radium Engineering adapter lets any of the current 3-bolt fuel cell filler necks used on the FCST-X be fitted to a legacy FCST with the 6-bolt filler pattern. It adds less than 1\/2in of height to the filler cap or neck, and keeps the same rollover protection as the legacy fillers through a built-in one-way valve. A new gasket is included (SKU 20-1127).\u003c\/p\u003e\u003cp\u003eCompatible fillers include the 20-1197-V direct mount fill neck and cap, the 20-1027 straight 1.5in barb filler neck and the 20-1047 remote mount fill neck with 24AN elbow, as well as Radium's FCST refuelling kits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Filler necks and caps are sold separately. Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eAdapts 3-bolt FCST-X filler necks to 6-bolt legacy FCST\u003c\/li\u003e\n\u003cli\u003eAdds less than 1\/2in height\u003c\/li\u003e\n\u003cli\u003eBuilt-in rollover protection via one-way valve\u003c\/li\u003e\n\u003cli\u003eNew gasket included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fcst-x-3-bolt-direct-mount-fill-neck-cap-vented\"\u003eRadium Engineering FCST-X 3-Bolt Direct Mount Fill Neck and Cap (Vented) - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fcst-x-3-bolt-remote-fill-neck-24an-1-5in-barb\"\u003eRadium Engineering FCST-X 3-Bolt Remote Fill Neck (24AN to 1.5in Barb) - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53923994534181,"sku":"20-1127","price":121.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/20-1127_1200px_wide.jpg?v=1790741582"},{"product_id":"radium-engineering-dry-break-1-5-male-prv-universal","title":"Radium Engineering Dry Break 1.5\" Male PRV - Universal","description":"\u003ch2\u003eRadium Engineering Dry Break 1.5\" Male PRV - Universal\u003c\/h2\u003e\u003cp\u003eThe Radium Engineering 1.5\" male dry break mounts on the fill spout of a dump can fuel jug (SKU 20-0996). Dry breaks allow fast, mess-free refuelling: the male probe fits the dump can and the female receiver fits the vehicle filler, and when coupled both valve seals open and close in sync with no leaks. Radium dry breaks are compatible with other dry breaks of the same size.\u003c\/p\u003e\u003cp\u003eA built-in pressure relief valve (PRV) lets the sealed side of the dump can be vented when it warms up - simply press the centre stainless steel valve to purge the pressure. Pair it with the Radium DSV valve (20-0535, sold separately) and vented air flow shuts off automatically when the cell is full.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1.5\" male dry break probe\u003c\/li\u003e\n\u003cli\u003eAnodised aluminium with stainless steel hardware\u003c\/li\u003e\n\u003cli\u003e1.5\" OD barb\u003c\/li\u003e\n\u003cli\u003ePressure relief valve (PRV)\u003c\/li\u003e\n\u003cli\u003eComponents and seals compatible with all fuel types, including petrol, diesel, AV gas, methanol, ethanol, E15 and E85\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dry-break-dust-cap\"\u003eRadium Engineering Dry Break Dust Cap - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dry-break-fitting-1-5in-female-vented\"\u003eRadium Engineering Dry Break Fitting (1.5in Female Vented) - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-dry-break-probe-restrictor-1-universal\"\u003eRadium Engineering Dry Break Probe Restrictor 1\" - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53923995877669,"sku":"20-0996","price":594.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/20-0996.jpg?v=1790741654"},{"product_id":"radium-engineering-dry-break-probe-restrictor-1-universal","title":"Radium Engineering Dry Break Probe Restrictor 1\" - Universal","description":"\u003ch2\u003eRadium Engineering Dry Break Probe Restrictor 1\" - Universal\u003c\/h2\u003e\u003cp\u003eThe Radium Engineering 1\" dry break probe restrictor is designed to satisfy endurance racing sanctioning bodies such as WRL (World Racing League) and ZRS, which require a 1\" (25.4mm) internal restriction between the dump can and the dry break (SKU 20-0704). It is laser engraved \"1-IN RESTRICTOR\" so compliance is easy to show at tech inspection.\u003c\/p\u003e\u003cp\u003eThe restrictor press-fits into the inlet of the dry break probe, then replacement tubing is fitted to the dry break and dump can barbs. It suits Radium 1.5\" male dry breaks 20-0996 and 20-0496, and most other 1.5\" probes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Always check the current rules of your series before competing. If pinch clamp pliers are not available, diagonal cutters can be used to tighten the clamps. Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1\" (25.4mm) restriction\u003c\/li\u003e\n\u003cli\u003ePress-fit OD 1.24\" (31.6mm)\u003c\/li\u003e\n\u003cli\u003eMachined 6061 aluminium, type-II anodised\u003c\/li\u003e\n\u003cli\u003eLaser engraved \"1-IN RESTRICTOR\"\u003c\/li\u003e\n\u003cli\u003eCompatible with most 1.5\" dry break probes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dry-break-fitting-1-5in-female-vented\"\u003eRadium Engineering Dry Break Fitting (1.5in Female Vented) - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-dry-break-fitting-1-5in-male\"\u003eRadium Engineering Dry Break Fitting (1.5in Male) - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53923998269733,"sku":"20-0704","price":86.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/20-0704_c0c00dbb-4d3c-4eb8-8eb3-b808acb2e6b9.jpg?v=1790741734"},{"product_id":"radium-engineering-saddle-tank-fuel-cell-conversion-kit-universal","title":"Radium Engineering Saddle Tank Fuel Cell Conversion Kit - Universal","description":"\u003ch2\u003eRadium Engineering Saddle Tank Fuel Cell Conversion Kit - Universal\u003c\/h2\u003e\u003cp\u003eThe Radium Engineering saddle tank conversion kit is a fuel transfer system that lets two motorsport fuel cells work together in one vehicle (SKU 20-0664). Splitting fuel across two cells increases carrying capacity and lets you position the cells for better weight distribution and a lower centre of gravity.\u003c\/p\u003e\u003cp\u003eThe system is built around the Radium FCST-X as the central surge tank and works with both standard and dry break refuelling, with 1.5\" ID tubing included. One or two Radium fuel level senders are recommended; two 0-90 ohm senders wired in series give a 0 (empty) to 180 (full) ohm range, or can be wired to separate ECU inputs so the passive-side lift pump switches off when that cell is empty. A Radium 20-0461 fuel level switch in the surge tank's 1\/8\" NPT port can also switch the active-side lift pump off when the surge tank is full.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Requires two Radium fuel cells (capacities can differ, but the top flanges must sit at the same height), a Radium FCST-X (earlier non-X FCST units are not compatible), at least three fuel pumps (two lift pumps with built-in outlet check valves plus one surge tank pump), and a remote filler and vent kit or remote mount refuelling kit. All sold separately. Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRuns two Radium fuel cells as one fuel system\u003c\/li\u003e\n\u003cli\u003eDifferent cell capacities can be mixed\u003c\/li\u003e\n\u003cli\u003eUses the Radium FCST-X as the central surge tank\u003c\/li\u003e\n\u003cli\u003eCompatible with standard and dry break refuelling\u003c\/li\u003e\n\u003cli\u003e1.5\" ID tubing included\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-venturi-jet-pump-kit-universal-saddle-tank-6an-orb\"\u003eRadium Engineering Venturi Jet Pump Kit - Universal Saddle Tank - 6AN ORB\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-fcst-x-fuel-cell-surge-tank-universal\"\u003eRadium Engineering FCST-X Fuel Cell Surge Tank - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53923998433573,"sku":"20-0664","price":1224.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/20-0664_1200px_wide.jpg?v=1790741739"},{"product_id":"radium-engineering-remote-mount-swing-valve-filler-universal","title":"Radium Engineering Remote Mount Swing Valve Filler - Universal","description":"\u003ch2\u003eRadium Engineering Remote Mount Swing Valve Filler - Universal\u003c\/h2\u003e\u003cp\u003eThis Radium Engineering swing valve filler (SVF) is a capless remote-mount fuel filler that works like a modern OEM filler: the valve swings open as the fuel nozzle is inserted, so there is no cap to unscrew (SKU 20-1003 \/ 20-1203). Remote fillers mount away from the fuel cell or tank, for example on a guard.\u003c\/p\u003e\u003cp\u003eA complete remote fill setup is made up of the remote filler, a remote fill neck at the fuel cell or FCST, and filler hose joining the two. Use the variant selector to choose the hose attachment size: 1.5\" or 2.25\".\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The remote fill neck and filler hose are separate components; choose them to suit your fuel cell and hose size. Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCapless swing valve design, opens when the nozzle is inserted\u003c\/li\u003e\n\u003cli\u003eRemote mount, located away from the fuel cell or tank\u003c\/li\u003e\n\u003cli\u003eAvailable for 1.5\" or 2.25\" filler hose\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-remote-mount-swing-valve-filler-cap-universal\"\u003eRadium Engineering Remote Mount Swing Valve Filler Cap - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-1-5in-filler-hose\"\u003eRadium Engineering Fuel Cell Filler Hose (1.5in) - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"1.5\"","offer_id":53924009115941,"sku":"20-1003","price":401.99,"currency_code":"AUD","in_stock":true},{"title":"2.25\"","offer_id":53924009148709,"sku":"20-1203","price":401.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/20-1003_1200px_wide.jpg?v=1790741973"},{"product_id":"radium-engineering-fuel-level-gauge-mount-universal","title":"Radium Engineering Fuel Level Gauge Mount - Universal","description":"\u003ch2\u003eRadium Engineering Fuel Level Gauge Mount - Universal\u003c\/h2\u003e\u003cp\u003eThis Radium Engineering mount holds a fuel level gauge directly on a Radium fuel cell (SKU 20-2585). It fixes to the cell perimeter, with slotted mounting holes that line up with any pair of the fuel cell plate screws.\u003c\/p\u003e\u003cp\u003eDesigned to pair with the Radium 52mm fuel level gauge (20-1847, sold separately).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eMounts to the perimeter of a Radium fuel cell\u003c\/li\u003e\n\u003cli\u003eSlotted holes align with any pair of fuel cell plate screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-52mm-fuel-level-gauge-universal-0-90-ohm\"\u003eRadium Engineering 52mm Fuel Level Gauge - Universal - 0-90 Ohm\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-level-senders\"\u003eRadium Engineering Fuel Level Sender - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53924009181477,"sku":"20-2585","price":78.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/20-2585.jpg?v=1790741974"},{"product_id":"radium-engineering-remote-mount-swing-valve-filler-cap-universal","title":"Radium Engineering Remote Mount Swing Valve Filler Cap - Universal","description":"\u003ch2\u003eRadium Engineering Remote Mount Swing Valve Filler Cap - Universal\u003c\/h2\u003e\u003cp\u003eThis is the cap component for Radium Engineering's remote mount swing valve filler (SVF) (SKU 20-1548). The SVF is a capless design that mimics modern OEM fillers, swinging open when a fuel nozzle is inserted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Confirm this cap suits your Radium swing valve filler before ordering. Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCap for the Radium remote mount swing valve filler\u003c\/li\u003e\n\u003cli\u003ePart of Radium's remote fill system\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-remote-mount-swing-valve-filler-universal\"\u003eRadium Engineering Remote Mount Swing Valve Filler - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-remote-mount-swing-valve-filler-universal-15in-elbow\"\u003eRadium Engineering Remote Mount Swing Valve Filler - Universal - 1.5in Elbow\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53924009214245,"sku":"20-1548","price":191.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/55f227c40065a5e09d3f3d4cfd8a870eL.jpg?v=1790748266"},{"product_id":"radium-engineering-remote-mount-vented-standard-filler-universal-1-5-elbow","title":"Radium Engineering Remote Mount Vented Standard Filler - Universal - 1.5\" Elbow","description":"\u003ch2\u003eRadium Engineering Remote Mount Vented Standard Filler - Universal - 1.5\" Elbow\u003c\/h2\u003e\u003cp\u003eThe Radium Engineering vented standard filler (SKU 20-1105-V) is a remote-mount filler for fuel cells and tanks where the factory filler can no longer be used. Its threaded, vented cap has built-in roll-over protection to keep fuel contained if the vehicle is inverted.\u003c\/p\u003e\u003cp\u003eThe 1.5\" elbow attaches at 75° and can be clocked to point in any direction, or removed so a 24AN filler hose can be connected to the flanged neck. The kit includes the hardware needed to hook it up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-1-5in-filler-hose\"\u003eRadium Engineering Fuel Cell Filler Hose (1.5in) - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-remote-mount-vented-fuel-cap-universal\"\u003eRadium Engineering Remote Mount Vented Fuel Cap - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fcst-x-3-bolt-remote-fill-neck-24an-1-5in-barb\"\u003eRadium Engineering FCST-X 3-Bolt Remote Fill Neck (24AN to 1.5in Barb) - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53924009312549,"sku":"20-1105-V","price":365.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/b400cb90aea688d95c204938c781c632L.jpg?v=1790748266"},{"product_id":"radium-engineering-dsv-extension-adapter-universal","title":"Radium Engineering DSV Extension Adapter - Universal","description":"\u003ch2\u003eRadium Engineering DSV Extension Adapter - Universal\u003c\/h2\u003e\u003cp\u003eFitted together with a Radium Dynamic Safety Valve (DSV), this extension adapter moves the vent shut-off point higher in the system, letting more fuel into the cell and fill neck before the valve closes (SKU 20-1035).\u003c\/p\u003e\u003cp\u003eIt suits higher remote fill locations where the aim is to get the most fuel into the cell, and speeds up refuelling by stopping the dump can from chugging before the cell is actually full.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Radium DSV valves are required and are sold separately. Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRaises the DSV air shut-off point\u003c\/li\u003e\n\u003cli\u003eAllows more fuel into the cell and fill neck\u003c\/li\u003e\n\u003cli\u003eReduces premature dump can chugging during dry break refuelling\u003c\/li\u003e\n\u003cli\u003eSuited to higher remote fill locations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-dynamic-safety-valve-dsv-universal-12an-orb-to-12an-male-high-fill\"\u003eRadium Engineering Dynamic Safety Valve (DSV) - Universal - 12AN ORB to 12AN Male High Fill\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-dsv-quick-fill-valve-internal-universal-12an-orb-to-12an-male\"\u003eRadium Engineering DSV Quick Fill Valve (Internal) - Universal - 12AN ORB to 12AN Male\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53924015505701,"sku":"20-1035","price":121.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/20-1035_b.jpg?v=1790742118"},{"product_id":"radium-engineering-dynamic-safety-valve-dsv-universal-12an-orb-to-12an-male-high-fill","title":"Radium Engineering Dynamic Safety Valve (DSV) - Universal - 12AN ORB to 12AN Male High Fill","description":"\u003ch2\u003eRadium Engineering Dynamic Safety Valve (DSV) - Universal - 12AN ORB to 12AN Male High Fill\u003c\/h2\u003e\u003cp\u003eThe Radium Engineering quick-fill Dynamic Safety Valve (SKU 20-0935) is required when adding a dry break refuelling system to an FCST, FCST-X or any filler with a 12AN ORB female vent port. When the tank is full, the upper sealing ball floats up and shuts off the vent, stopping fuel from escaping through the vent line, and the valve also provides roll-over protection.\u003c\/p\u003e\u003cp\u003eWith a dry break sealing the fill line, a small amount of pressure builds in the cell once the DSV closes and the dump can begins to chug. This is by design and tells the operator the cell is full and the dry break can be released.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFuel fill shut-off and roll-over protection in one valve\u003c\/li\u003e\n\u003cli\u003e12AN ORB to 12AN male, high fill version\u003c\/li\u003e\n\u003cli\u003eOne-piece billet 6061 aluminium, type-II anodised\u003c\/li\u003e\n\u003cli\u003eSuits FCST, FCST-X and fillers with a 12AN ORB female vent port\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-dsv-extension-adapter-universal\"\u003eRadium Engineering DSV Extension Adapter - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-fuel-cell-vent-kits\"\u003eRadium Engineering Fuel Cell Vent Kit (Roll-Over Protection) - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"Default Title","offer_id":53924015538469,"sku":"20-0935","price":95.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/20-0935.jpg?v=1790742119"},{"product_id":"radium-engineering-replacement-fuel-cell-can-universal","title":"Radium Engineering Replacement Fuel Cell Can - Universal","description":"\u003ch2\u003eRadium Engineering Replacement Fuel Cell Can - Universal\u003c\/h2\u003e\u003cp\u003eThis is a replacement aluminium outer can for Radium Engineering fuel cells. The can houses and protects the internal fuel bladder, so it is the part to order when the original shell has been damaged (SKUs 20-0666, 20-0670, 20-0671, 20-0674).\u003c\/p\u003e\u003cp\u003eUse the variant selector to choose the capacity to match your existing fuel cell: 6 gallon, 10 gallon, 10.5 gallon spare-tyre style or 14 gallon.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This can is a replacement part only and cannot be used without the fuel bladder. Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eReplacement aluminium can for Radium fuel cells\u003c\/li\u003e\n\u003cli\u003eProtects the internal fuel bladder\u003c\/li\u003e\n\u003cli\u003eAvailable in 6, 10, 10.5 (spare tyre) and 14 gallon sizes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePairs Well With\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-ra-series-fuel-cell\"\u003eRadium Engineering RA-Series Fuel Cell (FIA-FT3 Certified) - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/radium-engineering-replacement-fuel-cell-bladders-radium-ra-series-universal\"\u003eRadium Engineering Replacement Fuel Cell Bladders - Radium RA-Series - Universal\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNeed help confirming fitment? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Radium Engineering","offers":[{"title":"6 Gallon","offer_id":53924016423205,"sku":"20-0666","price":646.99,"currency_code":"AUD","in_stock":true},{"title":"10 Gallon","offer_id":53924016455973,"sku":"20-0670","price":716.99,"currency_code":"AUD","in_stock":true},{"title":"10.5 Gallon Spare Tyre","offer_id":53924016488741,"sku":"20-0671","price":961.99,"currency_code":"AUD","in_stock":true},{"title":"14 Gallon","offer_id":53924016521509,"sku":"20-0674","price":856.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/20-0670n.jpg?v=1790742145"},{"product_id":"fuel-safe-discriminator-valve-universal-12an-dv100","title":"Fuel Safe Discriminator Valve - Universal - 3\/4\" (-12AN)","description":"\u003ch2\u003eFuel Safe Discriminator Valve - Universal - 3\/4\" (-12AN)\u003c\/h2\u003e\u003cp\u003eThe Fuel Safe DV100 discriminator valve is a vent-line valve for fuel cells and race fuel systems. It is machined from aluminium with a 3\/4\" (-12AN) male fitting at each end, so it plumbs straight into a -12 vent line.\u003c\/p\u003e\u003cp\u003eThe body is 64mm (2.5\") across with a 70mm (2.75\") upper cap, and the valve stands 159mm (6.25\") tall, so check you have the room in the boot or cell area before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Follow Fuel Safe's installation guide when plumbing the vent system. Fittings and hose are sold separately. Installation by a professional is recommended.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3\/4\" (-12AN) male fittings at both ends\u003c\/li\u003e\n\u003cli\u003eMachined aluminium body\u003c\/li\u003e\n\u003cli\u003eHeight 159mm (6.25\"), body diameter 64mm (2.5\"), cap diameter 70mm (2.75\")\u003c\/li\u003e\n\u003cli\u003eMade by Fuel Safe Systems, USA fuel cell specialists\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNeed help planning your fuel cell vent system? Contact our team at \u003ca href=\"mailto:sales@chicaneaustralia.com.au\"\u003esales@chicaneaustralia.com.au\u003c\/a\u003e.\u003c\/p\u003e","brand":"Fuel Safe Systems","offers":[{"title":"Default Title","offer_id":54086942818597,"sku":"DV100","price":499.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/2943\/6709\/files\/DV100_DiscriminatorValve_FuelSafeSystems-2.jpg?v=1792094925"}],"url":"https:\/\/www.chicaneaustralia.com.au\/collections\/fuel-cell-accessories.oembed?page=2","provider":"Chicane Australia","version":"1.0","type":"link"}